R/Evolution 2530 User guide

Indent Indent
1 2
5
46
SHIPMENT CONTENTS (Kits Ordered Separately)
INSTALLATION
Micro-DB9
serial cable
Controller enclosure
2 power cords
2 ear caps
getting started guide
EIP environmental
information
3Rackmount Bracket Kit
Controller Kit
Documentation
Rackmount Kit Installation
7Ear Cap Installation
Rack Installation
Expansion Kit
Controller enclosure:
65 lb (29.5 kg)
Drive enclosure:
63 lb (28.6 kg)
1 SAS cable
per I/O module
Drive
enclosure
2 power cords
This poster
If the rackmount bracket kit
you are installing includes
assembly instructions, use them;
otherwise, refer to Chapter 2 of the
getting started guide for step-by-step
installation instructions.
.
Download the R/Evolution documentation set from:
http://crc.dothill.com

Copyright Protected Material 2006-2008. All rights reserved. R/Evolution and the R/Evolution logo are trademarks of Dot Hill
Systems Corp. All other trademarks and registered trademarks are proprietary to their respective owners.The material in this
document is for information only and is subject to change without notice.While reasonable efforts have been made in the
preparation of this document to assure its accuracy, changes in the product design can be made without reservation and without
notification to its users.
Host Ports Ethernet Port
MUI (Service) Port
Power Switch Power Switch
CLI Port Expansion Port
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
CABLING AND INITIAL CONFIGURATION
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
Controller Enclosure Ports
STATUSSTATUS
STATUSSTATUS
8Expansion Enclosure Connection
10 Initial Configuration
Part Number 83-00004397-10 Rev. A
May 2008
Data Hosts
9Data Host Connection
Chapter 4 of the getting started guide
Set the controller's IP address
Configure your web browser
Log in and set the date and time
Create virtual disks and map volumes
Always ensure that power switches are OFF before connecting the enclosure to a power source.
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
10/100 BASE-T
STATUS
ACTIVITY
DIRTY
CLEAN
CACHE
CLI
MUI
SAS
Port 0
SAS
Port 1
LINK
ACT
LINK
ACT
Test the configuration