R for Rabbit Picaboo User manual

INSTRUCTIONS FOR USE
CHILD CAR SEAT GROUP0+
Model: Picaboo
SUITABLE FROM BIRTH – 15 MONTHS
SUITABLE FROMAPPROXIMATELY 0 TO 13
K GS
NOTICE
1.This is a “Universal” child car seat; it is approved to ECE Regulation
44.04 for generaluse in vehicles and will fit most vehicle seats.
2.The best fit is if the vehicle manufacturer has declaredin the vehicle
handbook that the vehicle is capable of accepting this “Universal” child
restraint for this group.
3.This child restraint has been declared “Universal” under more strict
conditions than those applied to earlier designs which do not carry this
notice.
4.If you are in doubt, please consult either the child restraint
manufacturer or the retailer.
Only suitable if the vehicle is fitted
with 3- point static, 3-point retractor
safety belts, approved to UN/ECE
Regulation No. 16 or other equivalent
standards.
WA RNING
DO NOTplace rear-facing child
seat on front seats with airbags.
R for Rabbit's

C on t e n t s
NOTES
.............................................................................................................. 2
SAFETY WARNINGS
........................................................................................ 3
PARTS AND INTERIOR EQUIPMENT
.............................................................. 4
ADJUSTING THE SHOULDER HEIGHT...........................................................
5
THE ADJUSTMENT AND USE OF
H A RNESS.................................................. 5
SECURING THE INFANT CARRIER
................................................................. 6
SNAPPED THE HANDLE
.................................................................................. 8
CANOPY ASSEMBLY
....................................................................................... 9
MAINTAIN AND CARE OF YOUR PRODUCT ..................................................
9
PRODUCT SERVICE
.......................................................................................10
1

NOTES
1. Please read through these instructions carefully before using the baby car
seat for thefirst time.The instructions can be retained on the babycar seat
for reference in its life period.
App li c a b ili t y :
2
The baby car seat is suitable for weight categories 0+, (No older than
approx. 15 months).
WARNING
DO NOTplace rear-facing child seat on frontseats with airbags.
2.Your child seatcan only be installed rearward facing (in the direction
opposite the one in which you are travelling)with a lap and diagonal seat
belt passenger seats.
DIAGONAL B E L T
LAP
B E L T

3
SAFETY
WA RNINGS
1.
Th e ins truc tio ns ca n b e ret ain ed on t he baby c ar se at f or its lif e pe riod in the case of bui lt -in
rest ra ints.
2. This baby car seat can only be installed using a three-point vehicle
belt.
3. Do not use this child restraint on a passenger seat equipped with an airbag under
any
circumstances.
4. Do n ot leave you r ba by un att ended in th e se at a t a ny t ime.
5. Vehicle rear seat installation baby basket is the most secure position for the baby
car seat.
6. Do not use the child seat without fastening the child’s harness correctly, and never use it
without fastening it into the car as
f ollowing these fitting instructions. Before eac h jou rne y, chec
k whe
the r th e b aby ca r se at is inst al led fi rmly.
7. Do not modify this product in any way.
No t t o u se a ny lo ad b eari ng cont act poin ts oth er t
han
tho se d escr ibed in the in stru cti ons and marked i n t he chi ld car seat .
8. The
h andl e of t he bab y car sea t h as t o ag ain st t he back of the vehi cle sea t. If nec essary,
adj ust the hea d r est of the vehi cle seat .
9. The baby car
s eat must not be u sed wi tho ut t he co ver. And the sea t co ver sh oul d not be rep
laced
wit
h any other than the one recommended by the
manufacturer.
10.
Pro tect t he b aby car seat syst em a gainst dir ect sun li ght oth erwi se t he h igh temperat
ure
wil l h urt you r ch ild .
11.
Ens ure that al l p arts are lo cked in place co rre ctl y an d no t p enned in the adj usta
ble
seat s o r d oors.
12. Luggage and other heavy objects should be putted safely in the car. Loose objects
are liable to
cause injury in the event of an
accident.
13. Never
u se t he s
eat as a
sh oppi ng ba g or as a means f or trans port ing some thi
ng.
14.
Per iodi cal ly i nspect the har ness, pay p art icul ar att ent ion to att achment p oin ts, sti tch ing
and
adj usti ng devi ces
15. When the child seat is not used, it is
f
astened into the car with a seat belt to avoid
it being
thrown out of the car in an
accident.
16.In the event of an emergency, it is important to release the child quickly. This
means
that the buckle is not fully tamperproof and therefore your child should be
persuaded never to
play with the
buckle.
17. Do not
cont inue to use t he ba by ca r seat if par ts h ave b ecome damaged or have loo sened
af ter an acci dent .
18. After accident, the child car seat should be
changed.

PARTSAND INTERIOR EQUIPMENTPARTSAND INTERIOR EQUIPMENT
4
2
3
1
6 7
9
6 7
9
5 5
8 8
4 11
4 11
1 1
1010
Car seat-Picaboo Parts Drawing
Red Button Handle
Adjuster Red Button Handle Adjuster
Carry Handle
Carry Handle 1
2
Harness Adjuster under
“Press”
7
Shoulder Harness Sl s
8ot
3
Harne Adjuster
Strap ss 9 Diagonal Belt Guid e
4 Cover 10 Light Blu Lap Belt e
5
Harness
Buckle 11 Chest pad
6
Shoulder
Straps 12
ECE- mar
k
.
E4
044327

ADJUSTING THE SHOULDER HEIGHT
The harness has 2 positions. The straps should go into the slots at, or the nearest slots above the
height of the child’s shoulders. Remove straps by passing them through the slots from the front to
the back of the seat to adjust the harness: re-route the straps through the appropriate slots.
NO — T oo Lo w
NO — T oo H i gh
YES—Correct
THE ADJUSTMENT AND USE OF
H A RNESS
I f the heig ht o f your shou lder bel ts in c hil d c ar s eat is not fi t f or yo ur chi ld,
of
t he s houl der belt s, plea se p roce ed a s f oll ows:
Step 1:
loo sen the shoul der har ness (se e po int Belo w).
Step 2:
Pul l ou t t he bu ckle ton gues fr om t he ches t pad and
th e s lot s on the cover a nd th e s hell , t hen thread t hem
int o t he co rres pond ing be lt slo ts.
Ensur e that both of th e shou lder b elt s go th rou gh slo ts at the same
heigh t, and not twi sted .
1.
L oosening t he s houl d e r strap s
S tep1 .Th e sh ould er s trap s ar e sla ckene d b y pre ssi ng t he l ever ( unde r th e se at cover) on
the
fro nt o f t he s eat.
Step2.Pr ess d own o n t he l abel mar ked “Pre ss” as you grip th e two
sho ulde r st rap s wi th your oth er h and. Pul l t he shoul der
str aps towa rds you to loos en i t.
5
To adjust the height

2.Secu r i n g t he baby w i t h t h e ha rne ss
Fir stl y, adj ust the shou lder str aps hei ght(see poi nt ADJUSTIN G THE SHOULDER
HEIGHT ) , p roceed as f ol lows:
Step1.Loosen
th e ha rness(see poi nt abo ve), open th e bu ckle, an d pl ace them down sideways.
Se at your ch ild in the chi ld car s eat . Place b oth shoulder st raps over yo ur chil d's shoul der s.
Step2.Put
t he t wo metal sections of t he b uckle connectors together ( fi g. 1 ), Slot t he two
buckle
c onnec tor s i nto the sl ot i n t he top of t he b uckle un til th ey "cl ic k" int o
plac
e(f ig. 2 )
Check the
har ness is cor rect ly loc ked by p ull ing the shoulder st raps up wa rds (fi g. 3 ).
3.Tighten the shoulder h a r n e ss
Pull the shoulder straps upwards t o remo ve t he whole har ness then pull the
adj uster str ap un til th e harness i s f ully tighten ed(f ig. lef t) .
The h arnes s sh ould be adjusted as tightly as possible with out causing
d iscomf ort to your ch ild .
To
rel ease t he har ness (see po int ADJUSTING THE SHOULDER HEIGHT ),pr ess th e red b utton
o n th e bu ckle downwa rds .
SECURING THE INFANT C A RRIER
Please read the operating handbook in your vehicle to inform yourself about the basics concerning
children’s seats in
vehicles.
DO NOT place this baby seat on seats with front
airbags.
This baby car seat can only be installed using a three-point vehicle
belt.
The baby car seat must be Installed rearwards facing(in the direction opposite the one
in
6

fig 1 which you are traveling)
Step 1. Adjust the handle to the forward position (Fig.1).Put the seat in
car's seat.Handle mustbe firmly againstthe backrest of car's seat
Fig.
1
Step 2. Slide the lap belt of the
Vehicle’s3-point seatbeltthrough both Lapbelt guides.
Let the
tongue platesnap in the belt lock witha clearlyaudible “click”.
Pull the shoulder belt in narrow direction to tighten the
lap belt. Check to make sure the tongue plate is locked by pulling on
the belt(Fig.2).
Fig.
2
Step 3. Place the diagonal belt in the
diagonal beltguide at the backof theseat(Fig.3)
Fig. 3
Step 4. Tightenthevehicle`sown 3-point seatbeltbypulling hard
on the positions showed in fig. 3 and fig. 4.
Fig.
4
7
4
relative to t
h
echi
l
d
car seat manufactu
Step 5. The satisfactoryposition of the adultsafety-belt buckle carseat
is as the Fig 5. You can contactthe child rer if in doubt
aboutthispoint.
Fig.
5

Make sure all the belts` position is right and they has not become twisted. Also check that the cover is
not impeding the movement or fit of the belt webbing in any
way.
To release your baby car seat following the above instructions in reverse
order.
SNAPPED THE H A ND L E
T he h andle f or t he b aby ca r se at can be s napped i nto 4 s tabl e
po sit ions . To adj ust the handl e, please p ress the r ed b utt on of
h andle on b oth si de at the sa me
t ime. no w it can be rot ated .
The carry handle has four
positions:
1. Forward facing
In sta lle d in th e ca r. Th is posi tio n(only thi s po sit ion)is sui tabl e f or t he b
aby car seat
ins tal led on the vehicle sea t.
2. Straight up for
carrying
3. Handle
c lic ked back to ini ti ate the rocking fe atur e
4. Down to support baby for feeding and
play
Ensure that the handle is locked in a position, the harness is correctly fitted and the
buckle fastened
before carrying your car
seat.
8

9
MAINTAIN AND CARE OF YOUR
PRODUCT
REMOVE (CLEAN) THE COVER
The cover can be easily removed for washing. Remove harness by pressing the harness and loose
the shoulder straps to release buckles; then remove the cover to wash in warm water.
Follow reverse of the above to replace the cover.
CLEANING THE CAR
SE A T
The harness and plastic parts can be washed with very mild detergent and warm water. Do not use
chemicalcleansers, bleach or corrosives to wash any part of the car seat.