RadiantLife LTs User manual

Limited One-Year Warranty
Radiantcore Sdn. Bhd.
Sri Hartamas 50480 Kuala Lumpur Malaysia
Distributed by
Technical Specification
Light Source: Solid-state laser 655 nm
Power:  5 mW regulated
Auto Off Timer: 25 minutes
Indicators: 25,12,6,1 min remaining
  time, & end of session
  Battery low
Battery Type: 1 x 1.5V AA
Battery Life: approx. 60 hours with
alkaline battery
LASER RADIATION
AVOID DIRECT EYE EXPOSURE
IEC 60825-1
CLASS 3R LASER PRODUCT
USER'S GUIDE
Your RadiantLife LT is warranted to be free of defect in material and workmanship under normal use.
This warranty is limited for a period of one year from its original purchase date in which repairs or
exchange of parts according to what is deemed necessary by the company will be made free of charge.
This warranty does not cover damage by the following;
a. Misuse, abuse or alteration to the product
b. Damage caused by accident or neglect
c.Servicing or repairs made by unauthorized persons
WE SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT.
D i s p o s a l
To prote c t t h e e nviro n m ent, di s p ose
o f u s e d b a t t e r i e s a t a p p r o p r i a t e
c o l l e c t i o n s i t e s a c c o r d i n g t o
nation a l o r local reg u l ations.
P l a s t i c p a r t s a r e r e s i s t a n t t o
b i o d e g r a d a t i o n a n d s h o u l d b e
r e c y c l e d a c c o r d i n g t o m a t e r i a l a s
identi f i ed on the parts.
RLIFEmanLTS(M)100515
Symbol for protection against
electric shock for nose applicator
Symbol for advising operator that
operating instruction must be followed
Type B
applied part
Follow operating
instructions
Warning symbol against
LASER radiation
This product complied with the requirements of
the EU directive, 93/42/EEC (MDD) by meeting
the harmonised standard, EN 60601-1:2006
Upon request,manufacturer will provide circuit diagrams,component part lists, descriptions,
calibration instructions,or other information to assist service personal to repair parts.
i
93 / 42 / EEC

OPERATING INSTRUCTIONS
Timer Legend
b
c
e
f
g
d
h
j
Applicator
Contraindications
(Reasons not to use)
- Current or history of cancer
- During pregnancy
- A pacemaker or internal defibrillator
- Epileptic
Product Classification
- Internally powered equipment
- Type B applied part - nose applicator
- Ordinary equipment: IPX0
- Equipment not suitable for use in the
presence of a flammable anesthetic
mixture with air or with oxygen or
nitrous oxide
- Non-continuous operation (25 min. ON per day)
- No significant electromagnetic or other
interference between RadiantLife LT and
other equipment
Push
Button Cover
Release
Start of
session
12 minutes
remaining
6 minutes
remaining
1 minute
remaining
iPocket
Clip
Back
Cover
Timer
Indicator
Nose
Clip
Lens
Jack
Socket
a
Tr e a t m e n t S e s s i o n s
Each treatm e n t s e s sion lasts 25 minute s . One ses s i o n p e r d ay is recomme n d e d.
U s i n g R a d i a n t L i f e LTs
1. Pr e s s t h e cover re l e a s e ( h ) to open the back cov e r (j) and insert a 1.5V AA
battery. Sli d e t h e c over back in un t i l i t s n a ps in place.
2. Insert jack (f ) into the socket (g ) .
3 . I n s e r t t h e a p p l i c at o r l e n s ( d ) d e e p i n s i d e n o s e , w i t h t h e c l i p ( e ) o n t h e
outside.
4. Press t h e b u t ton (b) to switch on t h e u n i t . A s i ngle beep will sound.
5. The unit wil l r e m a in switched on fo r 2 5 m i n u tes. I n d i c ator lights (c) w i l l b l i n k
throughout the session showing the remaining time of application.
6. At the end of the s e s s i o n , t h e u nit will beep three ti m e s a n d t h en switches
off. The unit ma y b e s w itched off at mid- s e s s i o n by pressing but t o n ( b ) .
S a f e t y P r e c a u t i o n s
1. Av o i d shining the laser lig h t d i r ec t l y into eye.
2. Switch on t h e u n i t o n l y af ter the applicato r i s p r operly worn.
C a r e & C l e a n i n g
1. To clean the Applic a t o r, g e n t ly wipe sur f a ce with a cotton s w a b o r a s o f t c l o th
moistened with alcohol.
2. Use a soft, d r y c l o t h t o clean other surfaces. D o n o t use abrasive c l e a n e r s. Do
not submerge t h e A p p l icator or Co n t r o l unit in water.
3 . S t o r e t h e e q u i p m e n t i n a d r y l o c a t i o n , f r e e f r o m d u s t , a w a y f r o m d i r e c t
sunlight. The storage te m p e rature should be wi t h i n 1 0 oC to 40oC.
4. Clips (e ) a n d ( j ) a re made of a tough, high-impact plasti c m a t er ial. H o wever
exces s i v e bending can cause perma n e n t d e formation.
Replacing the Battery
1. Insert new batteries whe n t h e Control unit bee p s 5 t i m e s continuously.
N o t e: R e m ove batte r y if equipment is n o t l i k e l y t o be used for some tim e .
2 . To a c c e s s t h e b a t t e r y c o m p a r t m e n t , p r e s s t h e c o v e r r e l e a s e t o o p e n t h e
battery door. When inserting new batte r i e s, make sure t h a t t h e p o les are in the
right direction. Slide the bat t e r y door back in un t i l i t s n a ps in place.