Precautions for Use
Important Safety Instructions
Helpful Tips
Warranty
Projector Features
Product BoxContents
Projector Part Locations
Front/Top
Left
Rear
Base
Control Panel
Remote Control
Setting Up t he Projector
Projector Placement and Installation
Projection Distance and Screen Size
Projector Adjustment
Basic P rojector Operations
PowerO n/Off the Projector
PowerOn the Projector
PowerOf f the Projector
Projector Menu Settings
Projector PictureSettings
Projector Sound Settings
Projector Time Settings
Projector Option Settings
Projector Conne ctions
Introduction to Ports
Connecting to a StorageDevice
Connecting to a SD Card
Connecting to anAV Equipment
Connecting to a HDMI Device
Connecting to a VGA Device
Connecting to an Audio Device
Projector Clea ning and Maintenance
ProjectorCleaning
Cleaning the Projector Case
Cleaning the Lens
Cleaning the Vents
ProjectorMaintenance
Batteries Replacement of the Remote Control
Technical Specifications
Troubleshooting
Projector Part Locations
Front/Top
1. Lens
2. Focus/Zoom ring
3. Keystone ring
4. Front adjustable foot
5. Control panel
Rear
1. 2 USB ports
2. HDMI port
3. VGA port
4. Audio jack
5. AV input port
6. AC input port
Remote Control
1. Power button (turnsthe projector on or off)
2. Mute button (turns off s ound)
3. Previous button (selects previous program)
4. Next button(selects next program)
5. Rewind button (fast backward)
6. Fast forward button (fast forward)
7. Flip button (flips the image)
8. 16:9/4:3 button (s elects an aspect ratioof the image)
9. P.mode button (selects Picture mode)
10. Return button(cancels/exits functions)
11. Source button (selects of the input source)
12. Play/Pause button (plays/stops playing audio or video)
13. Up (selects upwardmovement on the function interface of the menu)
14. Left(selects leftward movement on the function interfaceof the menu)
15. Ok button (selects and confirms options)
16. Right (selects rightward movement onthe function interface of the menu)
17. Down (selects downward movement on the function interface of the menu)
18. Menu button (accesses projector menu system)
19. Exit button (exits functions)
20. Numeric buttons (enter numbers)
21. Zoom button (zooms into and out of the image)
22. Playback button (p lays back the video)
Introduction to Ports
USB ports (connects to USB storage devices)
SD card slot (connectsto a SD card up to 32GB)
AVinput port (connects to an AV equipment)
HDMI port (connects to a HDMI dev ice)
VGA port (connects to a VGAdevi ce)
Audio jack (connects to an audio d evice)
Connecting to a Storage Device
Insert a storage device into either of the USB ports.
When connecting to a storage device through either of the USB ports, pressthe
Source button and select USB 1 or USB 2 as input source. A connection is
successfully established now.
Choose the type of multimedia you want to d isplay (Movie/Photo/Music/Text) on
the multimedia interface. Press Left/Right to choose your storage device. Press
Up/Down/Left/Right to select the file showed on the screen, then press the Ok
button to open this selected file. Press the Play/Pause button to play or stop the
content.
Connecting to a SD Card
When connecting to aSD card through SD card slot, press the Source button and
select SD CARD as input source.A connection is successfully established now.
Choose the type of multimedia y ou want to dis play(M ovie/Photo/Music/Text)on
the multimedia interface.Press Left/Right to choose your storaged evice.Press
Up/Down/Left/Right to select the file showed on the screen, then press the Ok
button to open this selected file. Press the Play/Pause buttonto pl ayor s topthe
content.
Connecting to an AV Equ ipment
When connecting toan AV equipmentthrough AV inputp ort, press theSource
button ands electAV as input source.
Connecting to a HDMI Dev ice
When connecting to a HDMI device through HDMI port, press the Source button
and select HDMI as input source.
Base
1. Front adjustable foot
2. 4 Mounting bracket holes
(Please removethe rubber feet)
3. Front/Rearrubber feet
ControlPanel
1. Up button (selects upward movement)
2. Source button (selects of the input source)
3. Right/Volume up button (selects rightward movement and adjusts speaker
volume)
4. Play/Pause button (plays/stops playing audio or video)
5. Down button (selects downward movement)
6. Menu button (accesses projector menus ystem)
7. Left/Volume down button (selects leftward movement and adjusts s peaker
volume)
8. Power button (turnsthe projector on or off)
9. Ok button (selects and confirms options)
OPEN
MADE IN CHINA
1
2
3
1
2
3
4
5
8
7
6
9
Thank you for purchasingRAGU Z720. Please read this user’s guide carefully
before operating the projector, and save this guide f or future use.
If you have any further enquiriesor need any further assistance, please contact
us:
Call: 1-262-299-0397 (available f or customers in the United States currently)
Cleaning the Vents
Use a soft b rush or a special d esigned small vacuum to remove the dust.
Note: For cleaning p rocess, do Not sp ray any liquid (i ncluded water) directly on
any parts of the projector. Do Not use the chemical liquid to clean the projector
which will damage the projector.
Projector Mainte nance
For this part, we only off er the basic maintaining suggestions. If you have any
further requirements (replacement or repair), please contact the dealer or
qualified customer service team.
Batteries Replacement of t he Remote Control
If batteries have run out, please replacebatteries by following steps:
1. Open battery coverof the remote control;
2. Insert batteries with the + and – ends as the indicators on the battery box
showed;
3. Close battery coverof the remote control properly.
TechnicalSpecifications
To know product better and use projector properly, please read the table below:
Imaging Technology LCD
Native Resolution 1280 x 768 pixels
Maximum Supported Resolution 1920 x 1080 pixels
Light LED
Contrast Ratio 1000:1
Aspect Ratio 4:3/16:9
Speaker Built-in 1 x 5W
Keystone Correction ±12 ° Vertical
Screen Size 26-280 inches
Projection Distance 1-7 m
Recommended Projection Distance 2.5-5 m
Color 1.67 Million
1. RAGU Z720 projector
2. Remote control
3. Power cord
4. 3-in-1 AV cable
5. Adjustable foot (already installed)
6. HDMI cable
7. VGA cable
8. Cleaning cloth
Projector Adjustmen t
Except setting suitable throw distance, you can adjust keystone ring and
focus/zoom ring manually before projectingy ouri mages or videos:
1. Rotate the focus ring to adjust the clarity of the projected image until it reaches
to crystal clear;
2. Adjust the keystone ring to correct keystone distortion.
Basic Projector Operations
Basic operations provided help y ou to get s tarted quickly.
Power On/Off th e P rojector
Power On the Projector
Plug in the power cord, then press the Powerb utton on the top of RAGU Z720 or
on the remote control, the projector will turn on.
Power Off th e Project or
Press the Power button on the top of RAGU Z720 or on the remote control,
“Power to standby,Else to cancel” will bes howed on the screen.Press the Power
button again to turnoff the projector.
Projector Menu Settings
Press the Menu button on the control panel or on the remote control to access to
the menu interface. The menu interface allows y ou to set PICTURE, SOUND, TIME
and OPTION. Choose the feature you want to set by pressing the Left/Right button
on the remote control oron the control panel.
For detailed settings, press UP/Down to view options li sted under PICTURE,
SOUND, TIME and OPTION. Then press the Ok button to select options. (Some of
these options have a submenu,p ressthe Menu button to exit a submenu.)
FLIP 16 :9/4 :3 P.MODE
RETUR N
EXIT
MENU
SOURC E
ZOOM
1
5
4
23
6
79
8
0
OK
1 2
3 6
4 5
710
8 9
11 12
14 16
18 19
21 22
13
17
15
20
12
13
13
13
13
13
13
14
14
14
14
16
3
4
3
3
4
5
5
5
6
6
7
9
9
9
10
10
10
10
10
10
11
11
11
11
11
12
12
12
12
4
5
Picture Mod e Stand ard
Color Tempe ratur e Mediu m
Aspect Ratio 1 6:9
Noise Reduc tion Mi ddle
PC Setup
Backlight 1 00
Color Range 1 6~235
PICTURE
Sound Mode Mo vie
Balance 0
Auto Volume Of f
Surround So und Off
EQ
SOUND
OSD Languag e Engli sh
Restore Fact ory Def ault
Blending Lo w
OsdDuratio n Off
Flip 3
Focus 0
Software Upd ate(U SB)
OPTION
Clock – – – – – – – –
Off Time Off
On Time Off
Sleep Timer O ff
Auto Sleep Off
TIME
Projector Pict ure Set tings
For picture settings, you may adjust:
Picture Mode
Color Temperature
Aspect Ratio
Noise Reduction
Backlight
Color Range
Projector Sound Se ttings
For sound settings,y ou mayadjust:
Sound Mode
Balance
Auto Volume
Surround Sound
EQ
Projector Time Se ttings
For time settings, you mayadjust:
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Projector Option Settings
For options ettings,you may adjust:
OSD Language
Restore FactoryDefault
Blending
Osd Duration
Flip
Software Update (USB) - You can update indicated software through a connected
USB storage.
ProjectorCo nnections
You can connect the projector to USB storage devices, an audio source, a SD
card, an AV equipment, a VGA device or a HDMI device to enjoy your
presentations,i mages,or other videos,with premium sound.
Setting Up the Projector
Before projecting, please be familiar with the following suggestions of placement,
installation and adjustment.
Projector Plac ement and I nstallation
Youcan place or install your projector in thef ollowingways:
Front/Rear/Front Ceiling/Rear Ceiling
Front/Rear:Place the projector on flat and s turdys urface in front of y ou or behind
of you.
Front Ceiling/Rear Ceiling: Install projector in a qualified ceiling mount with a
fixed location.
Whether the wayy ouchoose to project your imagesor vid eos, please keepthese
suggestionsin mind:
1. Ensurethe pl acey ous et the projectoris s turdy and even;
2. Do not block the v ents and always leave enough s pacef or heat dissipation;
3. If the way you project is fromthe ceiling or from the rear,please ensure to
select the correctprojection option in the menu system.
Projection Dista nce and Sc reen Size
The throw distance, zoom factor, aspect ratio, and other s ettings determine the
approximate size of the image. Please refer to the following table for the
relationship between projection distance and i mages ize.
16:9 Aspect Ratio
Projection Distance
(Unit: m)
Screen or Image Size
(Unit: in)
1 1.5 51
2 2.0 70
3 2.5 90
4 3.0 110
5 4.0 145
Note: The table and measurements provided are for reference only.
Interface 1 x AC Input
2 x USB Ports
1 x SD CardSlot
1 x VGA Port
1 x AV Input
1 x HDMI Port
1 x Audio Jack
Consumption 140-150W
Power Supply AC110-240V 50-60Hz
Operating Temperature +5℃~+35℃
Storage Conditions Temperature (-10℃~+60℃); Humidity
(10%~90%)
Operating Humidity 10%-70%(Non-condensing)
Supported Video Formats MPG/AV/TS/MOV/MKV/DAT/MP4/VOB
Supported Audio Formats MP3/WMA/AAC/AC3/M4A
Supported Image Formats JPG/JPEG/BMP/GIF/PNG
Supported File Format TXT
Package Accessories Instruction M anual,Remote Control,
Power Cord, 3-in-1 AV Cable,
Adjustable foot(already installed),
HDMI Cable, VGA Cable, Cleaning Cloth
Package Size 38cm x 25cm x 14cm
Product Size 31cmx 22.5cm x 10.5cm
Net Weight 2.48kg
Troubleshooting
As a high-tech product, the projector combined with optical, mechanical and
electronic components and equipped with a protective and complicated circuit
inside. To quickly solve your problems and to p revent improper using and settings,
please follow operations below. If your problems or enquiries cannot be
eliminated after reading the table,p lease contact us without any hesitation.
Problem
Description
Troubleshooting
The projector
won’t turn on
Check if the power source is theindicated one and the
power cord is connected correctly. Make s urethe power
cord is not defective.
Lamp does not
workafter
turning on the
projector
Ensure powercord and power source areconnected
correctly.If the lampgets damages or the s erviceti me
of the lamp is more than 30,000 hours, please contact us
to replacethe lamp.
No images Check whether thef ormatand resolution of images are
supported by the projector.
No response
from remote
control
Check whether batteriesof the remote control run out or
are installed correctly. Make sure there is no obstacle
between the remote control and IR receiver. Always use
the remote control within its effective d istance (5m).
Obscure/blurred
images
Please rotate the focus ring, adjust the keystone and
throw distance until the projected image is clear. Ensure
the lens is clean.
Abnormal sound Ensure the audio devicei s connected correctlyand
function well. Check if the mute or minimum volume
mode is set.
device connection. It cannot connect to smartphone/tablet or charge
smartphone/tablet.
•The projector can connect to Mac/Mac Pro, the only accessory you need to
prepareis a HDMI adapter.
Warranty
Your projector comes with a f ree replacement or a f ull refund within 1 year that
lets your product with confidence. However, this warranty does not cover the
following:
•Purchases fromunauthorized resellers
•Improperlyoperated devices
•Purchases made over 1 y ear ago (unless you get extended warranty)
•Free products
•Lost or stolen products
ProjectorF eatures
RAGU Z720 projector includes these special and outstanding features:
Incredible watching e xperiences
•Ultra clarity and brightness of the imagewith sharp edges
•Native resolution of 1280×768 p ixels
•Maximum supported resolution of 1920× 1080pi xels
Flexible connectivity
•Supported multimedia p laying through VGA, HDMI and AV ports respectively
•Supported USB storage devices through 2 U SB ports
•Supported SD card through SD card slot
Easy-to-use setup and o peration features
•User-friendly operating system
•Innovative keystonecorrection ring for flexible projector placement
•Longer lamp life up to 30,000 hours
Product Box Con tents
Please save all the packaging in case you have further requirements (replacement
or refund). Use the original packaging (or equivalent) when shipping. Ensure your
projector box included all of these parts:
Precautions for Use
Follow these safety i nstructions and read these helpful tips before setting up and
using the projector.
Important S afety Instru ctions
•Do not di sassemblethe projector.If needed, please contact y our dealer for
repair/replacement.
•Do not use the different power source, it may result in fire or electric shock.
Please use the indicated type of power source.
•Do not look into thel ens whenthe projector is operating. The bright lightmay
damage your eyes.
•Do not use the projector near water or s ources of heat.
•Place the projector onan even surfaceor stable stand. If the projector is
mounted on a ceiling, it should be installed by qualified mounting hardwarewhich
designed for use with this projector.
•Unplug the projector after powering down.
•Do not bump, shake or drop the projector, it may cause damages or can even
lead to a projector crash.
Connecting to a VGA De vice
When connecting to aV GA device through V GAport, press the Source button and
select PC-RGB as input source.
Connecting to a n Audio Device
Connect the projector to anaudio device through audio jack.
Note: Ensure the format of movie/photo/music/text projected is supported by the
projector.
For supported format details, pl easecheck the table below.
ChannelMode File Typ es Supported
Multimedia Video File MPG/AV/TS/MOV/MKV/DAT/MP4/VOB
Audio File MP3/WMA/AAC/AC3/M4A
Picture File JPG/JPEG/BMP/GIF/PNG
Text File TXT
ProjectorClean ing and Mainten ance
For optimum watching experiences and longer lifetime, please clean the projector
periodically. For projector maintenance, please seek help from or under the
guidance of specified persons. If it is necess ary to replace any parts of the
projector, please feel free to contact the dealer or qualified customer s ervice
team. Before cleaning and maintaining the projector, please turn off the projector
and unplug the power cord.
Projector Clea ning
Always keep the projector clean to avoid affecting images quality and ventilation
system during working caused by dust, dirt and smudge.
Cleaning the Projec torCa se
Use a piece of dry, soft and lint-free cloth to remove d ust or dirt;
Use a piece of moistened and soft cloth with a little water and mild soap to
remove stubborn dirt.
Cleaning the Lens
Gently wipe the lens with a p iece of dry and non-abrasive cloth or paper to
remove dust or dirt;
Gently wipe the lens by a piece of moistened (with a little water), non-abrasive
and lint-free cloth to remove s tubborn dirt.
Helpful Tips
•For incredible clarity and optimum results, we strongly recommend that you
operate the projector in a dark environment
•You may adjust the focus ring and keystone simultaneously until to get crystal
clear images.
•Please understand that the projector makes noise for heat dissipation during
working. Nevertheless, it will not affect watching experiences when connected to
an audio device.
•RAGU Z720 projector is ideal for home entertainment, s uch as videos watching,
photos viewing and games playing etc.Please be advised that the projector is not
suggested for data presentation in b usiness.
•Maximum supported resolution of RAGU Z720 projector is 1920×1080 pixels with
its native resolution of 1280×768 pixels.
•If there is no sound when playing videos, you may check whether these videos
are equipped with Dolby technologies. The projector cannot support Dolby for the
present, but you can connect RAGU Z720 projector to a computer/laptop for
videos watching instead.
•The projector supports screen mirror with smartphone/tablet. The accessory you
need to prepare is a HDMI/Wi-Fi dongle. The stability of mirror screen completely
depends on the H DMI/Wi-Fi dongle. The USB port i s designed for U SB storage
