
2. LNB’s, C Band Configuring Profiles
LNB Profile A Horizontal
1. Press “Menu” Button on remote.
2. Go to “Tuning Preset”, press “ok”.
3. Press Yellow Button on remote twice.
4. Go to “LNB Power”, press “ok”, and set to “18-H”, and press “ok”.
5. Go to “DiSEqC, press “ok”, set to “Enable”, and press “ok”.
6. Go to “DiSEqC Switch”, press “ok”, and set to “A”.
7. Press Green Button to save.
LNB Profile B Vertical
8. Go to “LNB Configuration”, press “ok”, set to “2”, and press “ok”.
9. Go to “LNB Power”, press “ok”, and set to “18-H”, and press “ok”.
10. Go to “DiSEqC”, press “ok”, set to “Enable”, and press “ok”.
11. Go to “DiSEqC Switch”, press “ok”, and set to “B”.
12. Press Green Button to save.
13. Press “Exit” button.
3. When Saving A Preset
When saving a new preset (Channel Group) assign proper LNB polarity profile A or B to
corresponding mux’s polarity, Horizontal or Vertical when saving.
Document © Rainier Satellite LLC, 2013- 2017. All Rights Reserved.