Randell RAN FRA-1 User manual

CUSTOM FABRICATION
Chef Tables
Cafeteria Counters
Prep Area Counters
Serving Counters

Features & Benets.
Refrigeration Systems
Lower compressor operating temperatures prolong the life and efficiency
of the refrigeration. Features listed below enable Randell systems to run
25°F cooler than traditional condensing area designs.
• Fresh-air shroud enclosure assures the freshest and coolest air is
directed across the condenser coil for optimal heat removal
• Controlled flow of fresh air and exhausted air improves cooling capacity
and prevents recycling of super-heated air through the condenser coil
• High impact ABS door openings (jambs) provide superior durability
and greater operating efficiency while minimizing thermal transfer and
reducing sweating (typical of steel fabricated fronts)
• Hinged louver allows access to drains for pan rails/openings, cleaning
of the condenser coil, rail temperature control and rail on/off switch
• Increased storage capacity with factory designed and assembled mullion
coils — increases space, improves air flow and cooling capacity, and
keeps controls and fans safe
Patented Drawer Systems
• All stainless steel welded construction
• Unitized cartridge is easily removable without tools for easy cleaning
and preventative maintenance
• Quick-release and fully extendable drawer slides allow easy removal of
drawer tracks
• Variety of sizes for maximum space
• 3-year parts and labor on the entire assembly
Strong Supports
16-gauge (14-gauge available) top and standard under shelves are
supported with heavy-gauge U-channel supports that provide additional
strength and durability.
Drawer cartridge system with 3-year warranty on all parts and labor
Side-mounted compresser with air duct exhausts and breathes out the front
Randell Advantages.
As the leading manufacturer of custom
fabrication equipment, Randell has
combined years of proven experience
with modular manufacturing to provide
solutions for every customer application.
Reliability.
For more than 30 years, Randell has been designing,
engineering and manufacturing quality crafted
products with performance in mind. Each piece
of equipment is uniquely designed to customer
specifications and is built using the experience
gained from the thousands of units operational in
kitchens today.
Flexibility.
Randell provides design solutions for every
application. From design to operation, Randell
optimizes its modular manufacturing capabilities
using pre-designed components in distinctive
combinations.
Experience.
Drawing from our long standing relationships with
many chain and institutional customers, we are
able to leverage design elements developed for
specific applications and customize accordingly to
provide quality and performance design solutions
for small and large operation end-users.
Quality.
The Randell name stands for quality. Randell
custom fabricated equipment is designed and
manufactured for performance excellence and to
exceed customer expectations.
Consistency.
We draw from the same manufacturing excellence for
standard design units when crafting custom fabricated
equipment for specific customer applications. These
successful manufacturing practices yield custom
equipment that is highly repeatable and consistent
for large scale opportunities.
Applications.
Randell custom designed chef counters offer
product performance, food safety, and reliability for
end-user needs and menu requirements. Randell
equipment can be found in:
• Casual Dining Chains
• Full-Service Restaurants
• Quick-Service Restaurants
• Institutional Facilities
CUSTOM FABRICATION. PROVEN PERFORMANCE.

Conductive Cooling of Pans
Cold-wall conductive cooling with exclusive cold-transfer plates to
maximize efficiency and consistency of cooling pan.
Exclusive Gaskets
Unique press-fit gasket design allows end-users to easily remove,
clean and replace gaskets — no tools required.
Heavy-Duty Shelving
Overshelf design is strong, durable, safe and easy to install.
• Factory assembled and welded leg design with set-on installation
• Fully-enclosed UL listed raceways to conceal all electrical runs
and accommodate heat lamps or other accessories
Factory Wired Circuits & Breaker Panels
Single point main power connection to factory wired and factory
tested UL listed breaker panels.
• UL listed design eliminates untimely inspection issues
•
Reduced and controlled field installation costs
• Single floor or ceiling penetration for greater control of cost and quality
• Speed of installation saves time and money
•
Increased safety on factory tested system and easy-to-reach breaker
Easy To Clean
Randell’s exclusive standard rail/pan opening drain and conveniently
located oversized drain line are easy to clean. Front access through
hinged louver or mechanical housing door for easy cleaning.
• Easy access to rail/pan opening, on/off switch and thermostat
One-Piece Designs
Hot food well, cold-pan and sink openings are all integrally designed
and built into the top as one-piece, or installed from below, for the most
efficient design aesthetics and easiest to clean work-surfaces available.
Optional Cover
Randell’s optional hood cover design allows easy access to the
cover while managing the ambient conditions by shrouding the cold
space with its integral enclosed design.
Frost line above pans cools surface of pans for safe food temps
Press-fit gaskets can be cleaned or replaced easily
Smooth interior with exclusive pan drain and over-sized
rail drain for easy cleaning and sanitation
Optional accessories are built into the top of unit as one-piece
Optional exclusive hood cover for more control over ambient conditions
CUSTOM FABRICATION. PROVEN PERFORMANCE.

FX 09/07 (3m)
888-994-7636 • randellfx.com
FOODSERVICE EQUIPMENT SOLUTIONS
RANCRAFT
PREPARATION
TABLES
RANSPEC
CHEF TABLES
RANSERVE
MOBILE SYSTEMS
RANCRAFT
EQUIPMENT
STANDS
Information contained in this document is known to be current and accurate at the time of printing.
Unied Brands recommends referencing our product line websites for the most updated product information and specications.
888-994-7636 • www.unifiedbrands.net
CF 06/08 (3m)
FOODSERVICE EQUIPMENT SOLUTIONS
Information contained in this document is known to be current and accurate at the time of printing.
Unied Brands recommends referencing our product line websites for the most updated product information and specications.
REMOTE REFRIGERATION.
In addition to Randell’s proven self contained refrigeration, Randell also offers remote refrigeration at its
best. Remote refrigeration offers value in many different ways. Some of which include:
• Reduction of upfront equipment costs
• Allows tapping into existing remote rack systems or in conjunction with walk-in rack system
• Precisely balanced refrigeration systems from the factory
• Reduces ambient heat in the kitchen
• Reduces ambient noise in the kitchen
• Allows maximum utilization of equipment in a smaller foot print
All of these valuable features accompanied by Randell’s Custom experience can prove to be the ultimate solution
for your design specific projects.