Rasfox UH461 User manual

HDMI Switch Page 1
HDMI 2.0 Switch User Manual
(Model: UH461)
© 2016 Lakesen International Inc. All rights reserved.
Rasfox is a registered trademark of Lakesen International Inc. All other trade names and logos are
registered trademarks of respective manufacturers.
www.lakesen.com www.rasfox.com
Support Email: [e-mail]
____________________________________________________________________________________

HDMI 2.0 Switch Page 2
Table of Contents
Important Safety Instructions ------------------------------------------ 3
Introduction ------------------------------------------------------------------ 4
Understand the Unit ------------------------------------------------------- 4
How to Setup ----------------------------------------------------------------- 5
Operation -----------------------------------------------------------------------6
Specifications --------------------------------------------------------------- 7
FAQ Frequently Asked Questions ----------------------------------- 8
Warranty ---------------------------------------------------------------------- 10
Contact US ------------------------------------------------------------------- 10

HDMI 2.0 Switch Page 3
Important Safety Instructions
Please read instructions carefully before operation
1. To prevent risk of electric shock, do not remove the cover from the unit.
Refer all servicing to qualified service personnel only.
2. Do not use the converter near water.
3. Clean with a dry cloth only.
4. Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure the unit is well ventilated.
5. To prevent risk of electric shock or fire hazard due to overheating,
do not obstruct the unit with newspapers, tablecloths, curtains or
similar items.
6. Do not install near any heat sources such as radiators, heat
registers, stoves, etc.
7. Unplug during lightning storms or when unused for a long time.
8. Protect the power cord from being walked on or pinched, particularly near
plugs.
9. Only use manufacturer specified attachments/accessories

HDMI 2.0 Switch Page 4
Introduction
The Rasfox HDMI 2.0 Switch enables up to four HDMI source devices ( such as DVD
player, cable box, gaming consoles, Apple TV, and Sky WDTV console etc.) to be
connected to a single HDMI input port on your HDTV or projector. It can be used to
expand the number of HDMI ports on any HDMI devices. It supports UHD 4K @ 60 Hz.
It is an easy, convenient and inexpensive solution for expand your home theater setup.
Understand the Unit
Front Panel
Back Panel

HDMI 2.0 Switch Page 5
How to Setup
1. Take an HDMI cable and plug one end into the HDMI input port on HDTV or
projector. Plug the other end into the output HDMI port on the switch.
2. Take another HDMI cable and plug one end into the HDMI output port on one of
your media device or gaming console. Plug the other end into the one HDMI
input port on the switch.
3. Repeat the above step to connect up to 4 your media devices (Cable Box, DVR,
DVD player, Apple TV etc.).
4. Check and select the correct input channel on your TV.
5. Plug the output end of power adapter into the DC Power jack. Plug the power
adapter into an AC power outlet, then push the POWER button on. Your switch
is connected and ready for use now.
Typical Connection Diagram

HDMI 2.0 Switch Page 6
Operation
Automatic Input Selection:
When the switch is powered on for the first time, it senses input ports automatically and
switches to the input port source automatically in the sequence 1->2->3->4… It
bypasses input ports without signal.
When a new device is turned on, the switch will detects and selects that input channel
automatically.
Note: Some source devices stay in a stand-by mode can always maintain a connection
with the switch and keep its HDMI port active. This non-compliant behavior does not
allow the switch to perform its auto switching. In this case, you have to select your input
channel by panel button or remote control manually. Apple TV is one such non-
compliant device.
Input Selection with Front Panel Button
To select an HDMI input, press the “SELECT” button on the front panel of the switch.
Each press of the button progresses to the next active HDMI input and its
corresponding input LED indicator is on.
Input Selection with the Remote Control
There are direct input selection buttons on the remote control (Buttons 1, 2, 3, 4).
Pressing each button selects the corresponding input channel, no matter whether the
port has active signal or not.
Power on/off with the Remote Control
There is a Power buttons on the remote control, you can press it to turn on/off the
switch.

HDMI 2.0 Switch Page 7
Specifications
For Model UH461:
HDMI Version
2.0
HDMI Signal
4K@60Hz,4K@30Hz,1080p@60Hz &1080P
3D@24Hz
HDCP Compatible
HDCP 2.2
Audio Compatible
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-
AC3/DSD
Video Compatible
24/30/36/48 bit deep color
MAX bandwidth
600MHz
MAX baud rate
18Gbps
3D Compatible
Yes
Input cable distance
<15M AWG26 HDMI cable
Output cable distance
<20M AWG26 HDMI cable
Power supply
AC(50/60Hz)100V~240V input, DC5V 1A output
Operating temperature
10~70℃
Operating Humidity
5~85%RH
Dimension
148x62x22mm

HDMI 2.0 Switch Page 8
FAQ Frequently Asked Questions
1. What devices is the Rasfox HDMI switch compatible with?
For model SF501:
This switch should work well with any media source device with HDMI (version 1.3b)
output. Most media devices out there in the market are compliant with HDMI 1.3b &
earlier standards, such as HD-DVD players, PS3, Xbox360 and most Blu-Ray players.
For model UH461:
This switch should work well with any media source device with HDMI output. It
supports latest HDMI version 2.0 and lower, compatible with UHD 4K media devices,
support high resolutions up to 3840*2160@60Hz. Most latest 4K media devices in
the market are compliant with HDMI 2.0 & earlier standard, such as 4K DVD player,
Xbox One, PS4, PS4 Pro and more.
2. Is it HDCP-compliant?
HDCP is a copy protection to prevent copy-righted contents from traveling across
HDMI / DisplayPort / DVI freely, unless the connected devices are HDCP-compliant.
The Rasfox HDMI 2.0 switch support HDCP 2.2.
3. Why isn’t my switch working?
Our switches have been extensively tested and work well. It is solid constructed
with a metal case and well packed for shipping, ensuring the product you receive
should be of high quality. If you have any problems, there are some common issues
that you should double-check:
1) Please make sure your HDMI cables are securely connected to the switch and
TV or media device. Lose connection can cause issues.
2) Please make sure your HDMI cables are working and it support HDMI 2.0
(4K@60Hz). Try a different HDMI cable to check if cable is the issue.
3) Ensure the switch is powered on and your input devices are powered on.
4) Test with just one input device. Check if the input device works directly with the
TV. This will also help verify the HDMI cable.
If you continue to have problems, please contact us by email: [email protected].
We are always happy to help.
More questions? Please check www.rasfox.com/blog

HDMI 2.0 Switch Page 9
Warranty
1 Year Limited Hardware Warranty.
Lakesen hereby warrants to the customer of record that this product is in good-working
condition and free from defects in material or workmanship under normal use for a
duration of 1 year after the date of purchase. The product has been tested to meet the
highest quality standards in each testing category. In the unlikely event that the product
proves to be defective, Lakesen will repair or replace the product free of charge. If
replacement is required and if Lakesen then no longer carries the same product, then
Lakesen reserves the right to substitute the product with a replacement product of like
quality and size, suitable for the intended use.
This warranty is limited to repair or replacement of the mentioned product only, is non-
transferable and does not extend to any product damaged by misuse, natural disasters
or any other circumstances beyond Lakesen‘s control. The warranty does not cover or
provide for the reimbursement or payment of incidental or consequential damage
resulting from breach of the limited warranty described above. Except for the limited
warranty described above we offer no other warranties expressed or implied, and other
than limited warranty expressly contained herein, we hereby disclaim any and all
warranties, including without limitation any implied warranties of merchantability,
suitability or fitness for a particular purpose.
If your product is not functioning or you have any concerns please contact Lakesen
Support before returning the product.

HDMI 2.0 Switch Page 10
Contact US
You can reach our support by writing to [email protected]. You may also
visit www.rasfox.com or www.rasfox.com/blog for more information.

HDMI 2.0 Switch Page 11
Made In China