Raumfeld Sounddeck User manual
Quick Start Guide
Raumfeld Sounddeck
EN
Internet
1 Unboxing
Welcome to Raumfeld
Take a moment to ensure that all of the components
listed below were included in delivery.
Before beginning setup or use of your new Raumfeld device,
please read the Safety Notes included with the device.
Please keep the boxes for the duration
of the warranty period.
Note regarding rst time installations
Begin the setup process with the Raumfeld Expand if you plan to use this device.
The Raumfeld Expand is an optional device that can be purchased separately.
2 Ready your Wi-Fi
Make sure that your Wi-Fi router has been
activated, is using the latest software and
has access to the internet.
The router should be placed in a central
location so that it can supply your entire
household with a suf cient Wi-Fi signal.
During the setup process, it is important to ensure that all
Raumfeld devices receive a suf cient Wi-Fi signal. A signal
that is too weak can lead to dropped connections.
HDMI
3 Speaker placement 4 Connections
The Raumfeld Sounddeck is ideally placed under
a television and centrally aligned with the display.
Use the included HDMI cable to connect the Sound-
deck to your TV‘s HDMI ARC port.
Note
Alternately, you can connect the Sounddeck to your television
via an optical cable (TOSLINK) or a stereo RCA cable.
Place the device as desired and
plug in the power cord.
HDMI
ARC
If you already use a Raumfeld device, you
can quickly and easily add new devices
under the “Settings“ menu option in the app.
It is not necessary carry out the initial setup
procedure again.
Notes The Raumfeld Sounddeck is designed for
a HDMI cable connection to a television.
If you plan to use another type of connecti-
on, this can be con gured under the “Device
Settings” menu option in the app.
12
5 Getting started
Check that your smart device is connected to
your home Wi-Fi.
Download the “Raumfeld Controller“ App
from the Play Store/App Store.
Locate your Wi-Fi password and keep it
ready.
After starting the app, follow the directions
step-by-step until the setup process is
complete.
6 Remote control
During the initial setup, it is necessary to establish
a connection between the remote control and the
Raumfeld Sounddeck.
Remove the plastic strips on the bottom of the
remote control.
During the initial setup, the remote control
must be held in the immediate vicinity of the
sounddeck. Press station buttons 1 and 4
simultaneously until the LED on the remote
blinks three times. If the LED instead blinks
10 times in quick succession, you will need to
carry out the procedure again.
1 2 3 4
Troubleshooting
The sounddeck does not emit any sound in the TV mode or the playback skips.
If the sounddeck is connected to the television via HDMI or optical output, the television setting for the
chosen TV output in the playback mode should be “PCM.” Please ensure that the cable connecting the two
devices is securely attached.
The LEDs don’t light up.
Please make sure that the device is connected to a power supply. Check that the power cord is properly
plugged in to the power jack on your Raumfeld device.
After setup, my Raumfeld devices no longer, or only sporadically, connect to the Wi-Fi.
Make sure that the Raumfeld devices and the smart device with the Raumfeld App are using the same Wi-Fi.
If your router offers guest access, this should not be used for your Raumfeld system. Check that the Dynamic
Host Conguration Protocol (DHCP) on your home router is activated and that all essential devices within the
home network are able to communicate with each other.
The Raumfeld devices are connected to the network but playback is interrupted or skips.
It is possible that one or more Raumfeld devices are receiving either too little or, at times, even no Wi-Fi
signal. Try placing the device closer to the router, experiment with different placement locations or create a
wired connection between the affected device and router via Ethernet cable. If possible, try streaming lower
resolution audio les. In order to avoid network problems, we recommend the use of a Raumfeld Expand.
Where can I nd additional information and help?
Should you encounter unexpected problems or if you have additional questions, you’ll nd an extended FAQ
section in the Raumfeld Online Manual at manual.raumfeld.com.
Raumfeld® is a registered trademark of Lautsprecher Teufel GmbH, used under licence.
All rights reserved. Images may vary slightly from the actual products.
No part of this work may be reproduced, modied or otherwise used without prior
written permission.
U.S. Pat. No. US 8,902,934 ©2015 Berlin Acoustics, Inc.
In the United States, Raumfeld products are sold and distributed by Berlin Acoustics,
Inc., a Delaware corporation, and its authorized agents.
Outside the United States, please contact:
Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Strasse 44
10787 Berlin – Germany
www.raumfeld.com
Contact
RF-Sounddeck-v.2.1-EN
If you have any product related questions, need product support
or have suggestions, please contact us at:
Europe
Telephone
DE / CH / AT +49 (0) 30 300 930 400
NL +31 (0) 20 80 83 195
DK +45 (0) 89 886 335
SE +46 (0) 10 88 85 284
FI +35 (0) 87 53 263 952
NOR +47 (0) 81 503 272
GB +44 (0) 33 08 080 489
Other countries within the delivery area (English spoken)
00800 200 300 40
USA
Telephone
+ 1 888 98 31 276 (toll free)
Table of contents
Other Raumfeld Speakers manuals
