raumplus CORNICE 566 User manual

INTERIOR SYSTEMS: ASSEMBLY INSTRUCTIONS
INTERIOR SYSTEMS CORNICE 566
ACCESSORIES:
Version 4 Up to date April 2010
(Hanging rod / Socket for hanging rod)
1_ 2_
3_ 4_
5_ 6_
1_Bottom connector one-sided (type A) (82.10.001)_
2_Bottom connector one-sided (type B) (82.10.002)_
3_Bottom connector both-sided (82.10.003)_
4_Cover profile 362 mm (82.11.020) (with drilling for hanging rod)_
5_Cover (82.10.009)_
6_Wall connector (82.10.006), Spacer (82.10.016), Position plate (82.10.007),
screws and dowels_
7_Hanging rod connection (82.10.012)_
8_Hanging rod (82.23.020)_
7_ & 8_

22 mm
185 mm
185mm
22mm
1
Please make sure that you start in the corner
Distance to the wall
_ASSEMBLY
02_03

SW
13
2Preparation for the installation
Slide the caps onto the frame before the assembly.
After the alignment and installation of the wall attachment.
you won`t be able to attach the caps on the side of the wall anymore.
_ASSEMBLY

64
64
64
64
3
4
04_05
_ASSEMBLY
A
1
2
A

Now start the adjustment
Art.-Nr.: 82.10.002
Art.-Nr.: 82.10.001
Art.-Nr.: 82.10.002
Art.-Nr.: 82.10.001
Art.-Nr.: 82.10.004
6
5
_ASSEMBLY
A
A
1
2
Cover profile Art.-Nr.: 82.11.020
with drillings for socket for hanging rod

3
2
33
1
3
3
3
06_07
_ASSEMBLY
7
8
1
2

_ASSEMBLY
10
9
2
SW 13
3
3
To affix the frame, you can place another wall
attachment in the lower third.
Afterwards, adjust all frames
and slide the cover until it reaches
the flooring.
After the assembly and alignment
you can begin with the wall attachment.
Spacer

A
A
08
_ASSEMBLY
11
12
Use the height adjustment elements of the cabinet
to adjust any imbalances in the floor.
Hexagon socket 8 mm