Rave Sports Inflatable Dock Slide User manual

Inflatable Dock Slide
Owner’s Manual
www.ravesports.com

1
Table of Contents
Introduction ............................................................................2
Safety rules and information...................................................3
Dock compatibility guide..……………………………………………….5
Assembling and using your Dock Slide...................................6
Cleaning and storage .............................................................12
Troubleshooting and repairs.................................................13
Contents in this package
•Dock Slide Tube
•2 Attachment Straps
•12 VDC Inflator/Deflator
Please make sure you have received the contents listed, and
then record the following information for future reference.
Date Purchased: _________________________________
Purchased from: _________________________________
Copyright ©
All rights reserved. No part of this publication may be reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopy, recording, or any
information storage and retrieval system, without permission in writing from the publisher.
Requests should be mailed to RAVE Sports, 3325 Labore Road, Saint Paul, MN 55110.
•Repair Kit

2
Introduction
Water sports can be safe and fun for all levels of enthusiasts.
The Owner’s Manual is presented to enhance your enjoyment
of the sport. It is intended to alert you to some of the
potentially dangerous conditions that can arise in all water
sports.
Please take a few minutes to read this manual before
assembling and using the product. Although the product is
simple to use, this manual contains important safety
information that you and all users must understand to safely
enjoy the Dock Slide.
If you have any questions regarding this product, please call
RAVE Sports at 1-800-659-0790, or visit www.ravesports.com.
Please have the serial number (if available) from your
product ready when you call.
W A R N I N G
UNSAFE USE OF THE DOCK SLIDE CAN RESULT
IN PERSONAL INJURY OR DEATH.
To reduce the risk of injury, read and follow all
instructions and warnings in this manual. Do not use
this product unless you understand and accept the
risk of injury involved with this activity.
!
!

3
Safety Rules and Information
•Read and understand all of the information contained in
this owner’s manual before assembling and using your
product.
•Make sure that everyone who uses the product is provided
with and understands these safety rules and information.
•The Dock Slide is designed to be used only on docks that
allow for safe attachment and have sufficient water depth
to ensure safety.
•Choose a location for your product that is most protected
from wind, of sufficient water depth, and free of obstructions
above and below the water for at least 20 feet to the front and
sides of the Dock Slide.
•Always wear a U.S. Coast Guard approved Type III (PFD)
personal floatation device when using the product.
•Never use the product after sunset, before dawn, or any
other time in poor lighting conditions.
•Never use the product in rough surface water conditions,
during storms, or when there is lightning. If an unexpected
storm arises while using the product, seek shelter on shore.
Do not stay on the product.
•Never use the product under the influence of alcohol or
drugs.
•Always stay under control while using the product.
•Always make sure water near slide entry is clear of
swimmers or other obstructions.
•Never swim or play under the Dock Slide.
•This product is not a towable.

4
•Do not allow more than one person (up to 180 lbs.) to slide
and/or climb on the slide at one time. Exceeding this may
result in injury.
•Never slide down the Dock Slide head first or attempt other
acrobatic maneuvers on the product.
•No pushing or shoving persons while on the Dock Slide.
•Do not climb up the Dock Slide to exit the water. Use
boarding ladder on the dock.
•Never jump from top of Dock Slide, stay in a seated
position at all times.
•Never use the product while tired or fatigued. Use extreme
caution while swimming around the dock.
•Do not use Dock Slide in close proximity to moving boats or
other water craft in operation.
•Always inspect the areas around and under the product
before each use to ensure the water is deep enough and
free of all rocks, logs, sand bars, and underwater
obstructions and that the product is a safe distance from
above water hard objects. Ask about local water conditions
before using the product in unfamiliar water.
•When not in use, deflate Dock Slide and store in a secure
area. Never leave slide inflated and unattended.
•Inspect your product for any worn, defective, or missing
parts and replace or repair before using.
•Use the Dock Slide only under mature, knowledgeable
adult supervision.

5
IMPORTANT:FOR DOCK SLIDE USE ONLY. DO NOT ATTEMPT
TO USE ON DECKBOATS, RUNABOUTS, FISHING BOATS OR OTHER
CRAFT. BEFORE ASSEMBLING OR USING YOUR SLIDE, MAKE SURE
YOUR DOCK MEETS THE FOLLOWING CRITERIA:
1.A secure deck with a height of 12-30 inches from the top of
dock deck to the top of the water below.
2.Water depth should be a minimum of 48 inches for docks that
are 12-24 inches above the water surface and 60 inches deep
for docks that are 24-30 inches above the surface.
3.The Dock Slide should not be used with docks that have less
than 12 inches or more than 30 inches of clearance between
the water surface and the top of the dock or with less than the
recommended water depth as indicated above.
4.1/8” x 1 ½” openings in the decking to allow attachment straps
to be fed through.
These criteria must be met in order for the Dock Slide to be securely
fastened to the dock. If your dock does not meet these criteria, do not
attempt to use the product.

6
Assembling your Dock Slide
Step 1
Make sure the dock deck and surrounding water are free
from obstructions and that you have a minimum water
depth as listed above. Ensure the dock deck is secure and
stable with a height between 12 - 30 inches above the
water.
Do not use if your dock does not meet these requirements.
Place deflated Dock Slide on the
shore or similar firm surface with
sufficient clearance to inflate and
transport your inflated slide to the
dock location you intend to attach it
to. Make sure the area is free of all
sharp sticks, rocks or other objects
which could puncture the product.
Step 2
Connect the inflator/deflator provided with the Dock Slide
to a 12V battery of a boat or car.
The red clip of the pump should connect to
the positive terminal (red); the black clip
should connect to the negative terminal
(black). Make sure clips are securely
fastened to the battery terminals.

7
CAUTION
•Use caution when connecting inflator to battery to
avoid sparks or shock.
•Ensure hands are dry when connecting/
disconnecting clips to battery.
•Connect one clip at a time.
If you prefer to use a 120V inflator, please order the RAVE High
Speed Inflator/Deflator (P/N 01083) online at www.ravesports.com
or call Customer Service at 800-659-0790.
Use the skinny nozzle on the inflator to
inflate the slide rails first. Once the rails are
inflated, moisten the plug and insert fully so
it is flush with the surface.
Locate the main valve (on climb side of
slide) and remove cap. A special inflation
adaptor is included with this product.
Simply lock the adaptor onto the end of the
inflation hose and insert into the valve
body. Turn ¼ turn clockwise to lock in place.
NOTE: This inflation adaptor will automatically open the
valve when inserted and will close the valve when
removed. You do not need to manually open/close the
valve when using this special adaptor.
Inflate the main chamber of the slide until it is firm. Properly
inflated, the slide will be firm and will not buckle during use.
Electric Shock
Hazard
!!

8
To remove inflator, turn adaptor ¼ turn counter-clockwise.
Install outer cap.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2 PSI if filling with compressed air.
Excessive pressure can cause the tube to rupture with
potentially damaging force to eyes, ears, skin and limbs.
Use of an air compressor or over-inflation can rupture
the tube beyond repair, thus voiding the warranty.
To manually open valve, depress
the stem and rotate clockwise. To
close valve, depress the stem and
rotate counter-clockwise.
Note: It is normal for the air
pressure within the tube to
fluctuate depending on air and
water temperatures. It may be necessary to increase or
decrease the air pressure in your product accordingly. To
avoid damage on extremely hot days it may be necessary to
check and release the air pressure from your product
throughout the day. On cool days you may need to add air.
!
!

9
Step 3
Attach the 48 inch, black attachment
straps by looping the strap around the
planks of your dock.
IMPORTANT: Your decking must have
openings that are minimum 1/8” x 1 ½”
wide to accommodate the straps passing through.
For planks that run perpendicular to the slide direction (Fig.
A), insert the straps around the second or third plank. Space
straps approximately 36” apart.
For planks that run parallel to the slide direction (Fig. B),
insert the straps behind a frame support member that is
running perpendicular to the decking. This is critical to
prevent the straps and slide from slipping forward.
Attach both straps to the dock and tighten securely.
Figure A
Figure B

10
Step 4
Place a piece of foam or other non-slip
mat (not included) on the surface of the
deck where the slide will be positioned.
This will help protect the inflatable slide
from wear and possible puncture.
Position the slide between the two straps. Attach the free
end of both straps to the buckle on each side of the slide.
Feed the strap up through the backside (slide side) of the
upper buckle opening and then down through the lower
buckle opening. Pull both straps tight so the slide is securely
fastened to the surface of the dock. Tie off the remaining
loose end of both straps in a secure fashion.
Before sliding, check to make sure the slide is securely fastened
to the dock and the decking will not lift during use. Secure
decking if necessary.
To Slide
Before sliding, wet slide surface with water. Sliding on a dry
surface can cause burns to the skin or lack of sliding
movement.
Climb up slide using hand and foot holds. Use top handles
when transitioning from the climbing position to a seated
position. NEVER STAND ON THE TOP
OF THE SLIDE.
Always slide feet first. Ensure water
is clear of obstructions and other
people before going down slide.

11
Deflating your Dock Slide
Step 1
Loosen all connection straps from dock deck.
Step 2
Tip slide onto dock or carry it to shore.
Each pump is designed to both inflate
and deflate the slides. Deflate slide by
moving the hose to the deflation port
on the side of the air pump. Attach
battery clips to the battery terminals
and attach the hose to the valve as you
did when you inflated the tube. Once
all air is removed, make sure slide is
completely dry for storage. Fold or roll
to a compact size.
Make sure to disconnect inflator from battery after use.
Deflation port

12
Cleaning and Storage
When the inflatable product is not being used, store it in a
covered, shaded area. This will help protect it against
ultraviolet (UV) rays and extend the life of the product.
Clean the inflatable completely with a mild soap and fresh
water. NEVER USE PETROLEUM BASED PRODUCTS OR
SOLVENTS FOR CLEANING. NEVER USE A POWER WASHER
SINCE THE HIGH PRESSURE WATER WILL DAMAGE THE
TUBE BEYOND REPAIR.
For storage, roll the product loosely and place in a
container, preferably one that rodents can’t chew through.
Secure against unauthorized and unsupervised use.
Store in a cool, dry location. Do not store product directly
on concrete surface. Place mothballs around stored
inflatable to keep mice and insects away.
Troubleshooting
Air chambers won’t hold air:
•Check to make sure all valves are completely closed.
•Check for holes in the slide following the procedures in
the “Repairs” section.

13
Repairs
Additional repair patches can be purchased at
www.ravesports.com.
For Minor Holes or Tears:
Inflate the slide and locate the leak by spraying the tube
with soapy water. Bubbles will appear where there is a
leak.
Determine the hole size and cut a circular patch ½ - 1
inch wider than the hole with repair kit included with the
product.
Remove air from the tube and dry tube completely
where the patch is to be applied.
Peel off paper back from patch, apply repair patch to
area and work out any air bubbles from beneath the
patch.
Apply weight to the patched area for one hour before re-
inflating.
For warranty and return information, please visit
www.ravesports.com.

14
This page intentionally left blank.

15
www.ravesports.com
RAVE Sports
A Revel Match, LLC Company
3325 Labore Road
Saint Paul, MN 55110
800.659.0790
November 2012