Rave Sports Bongo 10 User manual

Bongo™10 and 13
Owner’s Manual
10’ Bongo 13’ Bongo
WWW.RAVESPORTS.COM
Copyright © 2017
All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopy, recording, or any information storage and
retrieval system, without permission in writing from the publisher. Requests should be mailed to RAVE
Sports, 985 Aldrin Drive #301 Eagan, MN 55121. 800.659.0790

1
Table of Contents:
Introduction .................................................................................................2
Safety rules and information .................................................................3
Bongo™ 10 ...................................................................................................7
Bongo™ 13 ....................................................................................................8
Inflating your Bongo ..............................................................................9
Assembling and attaching the ladder ............................................. 11
Cleaning and storage ............................................................................ 14
Repairs ........................................................................................................ 15
Package Contents:
•Bongo Tube
•Boarding Ladder
•Ladder Stabilizer
Please make sure you have received the contents listed, and
then record the following information for future reference.
Date Purchased: _________________________________
Purchased from: _________________________________
Serial #: ________________________________________
(The serial # is located by the inflation valve. Having this number handy will
assist you in finding accurate parts and information for your specific product.)
•Inflation Adaptor & coupler
•Repair Kit
•Warranty Registration
Staple your sales
receipt here.

2
Introduction
Water sports can be safe and fun for all levels of enthusiasts.
The Owner’s Manual is presented to enhance your enjoyment
of the sport. It is intended to alert you to some of the
potentially dangerous conditions that can arise in all water
sports.
Please take a few minutes to read this manual before
assembling and using the product. Although the product is
simple to use, this manual contains important safety
information that you and all users must understand to safely
enjoy the Bongo.
If you have any questions regarding this product, please call
RAVE Sports at 1-800-659-0790, or visit www.ravesports.com.
Please have the serial number from your product ready when
you call.

3
W A R N I N G
UNSAFE USE OF THE BONGO CAN RESULT IN
PERSONAL INJURY OR DEATH.
To reduce the risk of injury, read and follow all
instructions and warnings in this manual. Do not use
this product unless you understand and accept the
risk of injury involved with this activity.
EN 15649 –LIMIT (1) BOUNCER
!!

4
Safety Rules and Information
•Read and understand all of the information contained in this
owner’s manual before assembling and using your product.
•Make sure that everyone who uses the product is provided
with and understands these safety rules and information.
•The Bongo 10 & 13 is designed to be used on land or in
large bodies of water with depths of at least 8 feet (2,4m) of
water. Do not use or allow anyone else to use the product in
recreational swimming pools.
•Choose a location for your product that is most protected
from wind, of sufficient water depth, and free of
obstructions.
•Always anchor the Bongo securely before it is used on water.
•Always wear a U.S. Coast Guard approved Type III (PFD) vest
when using the product.
•Never use the product after sunset, before dawn, or any
other time in poor lighting conditions.
•Never use the product in rough surface water conditions,
during storms, or when there is lightning. If an unexpected
storm arises while using the product, seek shelter on shore.
Do not stay on the product.
•Never use the product under the influence of alcohol or
drugs.
•Always stay under control while using the product.

5
•Do not allow more than three people totaling 500 lbs.
(227kg) max on the 10ft. (3,1m) Bongo or more than five
people totaling 700 lbs. (317kg) max on the 13ft. (4m)
Bongo at one time.
•Never swim or play under or around the Bongo.
•Never dive off of the Bongo head first. If you choose to jump
off the product, always enter the water feet first.
•Never use the product while tired or fatigued. Use extreme
caution while swimming between the shore and the product.
Do not attempt to swim this distance if you are tired or
fatigued.
•Always inspect the areas around and under the product
before each use to ensure the water is deep enough and
free of all rocks, logs, sand bars, and underwater
obstructions and that the product is a safe distance from
above water hard objects. Ask about local water conditions
before using the product in unfamiliar water.
•When not in use, secure the product against unauthorized or
unsupervised use.
•Inspect your product for any worn, defective, or missing parts.
•Do not attempt flips, somersaults or other acrobatic
maneuvers on the product. Most debilitating spinal cord
injuries that occur during trampoline use involve
somersaults. Improper landing during a somersault
produces serious risk of broken bones, cuts, nerve damage,
spinal cord or brain injury, or death.

6
•Use the Bongo only under mature, knowledgeable adult
supervision.
•Not recommended for children under the age of six.
•Do not over inflate. Over inflation can cause seam rupture.
•Do not use in shark invested water or in water that may
contain other marine life dangerous to humans.
•Ensure proper air pressure is maintained while the product is
in use. Check air pressure frequently especially on very
hot/cold days.
•This device is not designed to be used as a life saving
device.
•Take off watches, rings and other sharp objects before use.
•When using on land, always maintain adequate clearance
from hard surfaces or obstructions above and around this
product. Use on soft sand or place shock-absorbing material
around ground perimeter.

7
Bongo 10
(Item #02011 & #02086)
Product
Minimum
Water Depth
Maximum
Capacity
Maximum
Weight
Working Pressure
BONGO 10
8ft
(2,4m)
2 Users
500lb
(227kg)
2 psi (0,14bar)

8
Bongo 13
(Item #02008 & #02236)
Product
Minimum
Water Depth
Maximum
Capacity
Maximum
Weight
Working Pressure
BONGO 13
8ft
(2,4m)
4 Users
700lb
(317kg)
2 psi (0,14bar)

9
Inflating Your Bongo
Step 1
Lay the Bongo on a flat surface. Make sure there are no sharp objects
under the product that might puncture the tube.
Step 2
Locate the valve of the Bongo and unscrew the cap. We recommend
using the High Speed Inflator/Deflator from RAVE Sports to inflate and
deflate. (Part #01083)
A special inflation adaptor is included with this
product. If you are using the RAVE Sports High
Speed Inflator, simply lock the adaptor onto the
end of the inflation hose and insert into the
valve body. Turn ¼ turn to lock in place.
NOTE: This inflation adaptor will automatically
open the valve when inserted and will close the
valve when removed. You do not need to
manually open/close the valve when using this
special adaptor.
OPEN
CLOSE
To lock open valve, depress the stem and
rotate ¼ turn clockwise. To close valve,
depress the stem and rotate ¼ turn counter-
clockwise. The valve stem should be in the
depressed position while inflating. Replace
cap on valve after inflation to ensure air tight
seal.
Adaptor
Coupler

10
If you will be using another inflation device with a larger nozzle, use
the 1 ¼” diameter coupler (included) between the valve adaptor and
the output hose of your inflator.
Make sure the hose is attached to the blower port of the vacuum for
inflation. Insert the adapter into the air valve and lock into place by
turning clockwise.
Inflate until the tube is firm and resistant to pressure. Your fist should
create only a slight depression when pushed against the tube and the
surface should be stretched taut in all directions. Replace cap to
ensure an air tight seal.
To check the exact pressure of your product the use of a RAVE Digital
Pressure Gauge (Item #02496), not included is recommended.
NOTE: It is normal for the air pressure within the tube to fluctuate
depending on air and water temperatures. It may be necessary to
increase or decrease the air pressure in your product accordingly. To
avoid damage on extremely hot days it may be necessary to check and
release the air pressure from your product throughout the day.
C A U T I O N
DO NOT OVER-INFLATE.
Do not exceed 2.5 PSI (0,17 bar) if filling with compressed
air. Excessive pressure can cause the tube to rupture with
potentially damaging force to eyes, ears, skin and limbs.
Use of an air compressor or over-inflation can rupture the
tube beyond repair, thus voiding the warranty.
!!

11
Attaching the Ladder
Step 1
The ladder consists of two pieces: a ladder with straps
and a molded plastic ladder stabilizer.
Orient the stabilizer on the notched side of the top
two ladder steps and the curved portion is facing
upwards towards the top of the ladder. While
maintaining this orientation, flip the ladder upside
down to expose the underside of the steps.
Step 2
Line up the large opening of the keyhole slots
with the four bolts on the underside of the top
two steps.
Step 3
Slide the stabilizer towards the ladder to fully engage the bolts in the
narrow end of the slots. Tap the stabilizer with
your hand to ensure the bolts are fully engaged
in the slots.
Note: If the stabilizer feels loose after mounting,
tighten the bolts slightly leaving minimal
clearance between the bolt flange and the plastic stabilizer. This slight
clearance will allow the stabilizer to be easily removed by hand
(without tools) for storage.
To remove stabilizer, simply slide in opposite direction.
Curved portion

12
Step 4:
Move the Bongo to shallow water. Attach the ladder in the center of the
blue panel to the left of the air valve so that the warning label on the tube
is visible to anyone climbing the ladder. The RAVE lettering on the ladder
steps should be facing the climber.
Feed both ends of the
ladder straps through
the gaps on Bongo jump
surface. Pull them
through far enough so
that the quick link
reaches the two loops
on the inside of the
tube.
Have someone hold the ladder in this position while another person
goes under the tube to connect the ladder straps.
Feed the quick link onto the loops of the ladder connection plate &
turn the nut until closed and the link is secured.
Ensure webbing loop is lying flat across the entire width of the quick
link as shown. Repeat for other strap.

13
Step 5
When properly installed, the ladder will hang with the curved portion
of the stabilizer against the underside of the Bongo and the top
handle will be across the edge of the bounce surface.
Step 6
Attach an anchoring device to the ring or mount on the inner surface
of the tube just above the water line, opposite of the ladder.
Note: For seasonal anchoring situations, it is important to use an
anchor weighing a minimum of 80 lbs (37kg).
The Bongo is now ready to use! Please read and follow all safety
instructions before enjoying your Bongo.
Photo shown with Bongo out
of water to show proper
ladder orientation and
placement.

14
Cleaning and Storage
•When the inflatable product is not being used, store it in a
covered, shaded area. This will help protect it against ultraviolet
(UV) rays and extend the life of the product.
•Clean the inflatable completely with a mild soap and fresh water.
NEVER USE PETROLEUM BASED PRODUCTS OR SOLVENTS FOR
CLEANING.
•NEVER USE A POWER WASHER SINCE THE HIGH PRESSURE
WATER JET WILL DAMAGE THE SOFT PVC COATING ON THE
TUBE BEYOND REPAIR.
•Product should be completely dry and remain dry while stored.
•Roll the product loosely and place in a container, preferably one
that rodents can’t chew through.
•Secure against unauthorized or unsupervised use.
•Store in a cool, dry location. Do not store product directly on
concrete surface. Place mothballs around stored inflatable to
keep mice and insects away.
::::::::::::::::::::::::::::::::: IMPORTANT:::::::::::::::::::::::::::::::::
Rodents like muskrats may be attracted to the PVC vinyl of your product.
When your product is on the water, maintaining full air pressure during
periods of non-use will discourage them from chewing the vinyl. Another
way to ease the problem of nuisance rodents is to remove the temptation
by taking the product out of the water at night. Another option is to
make the whole area unattractive to rodents by changing the
environment, making the area less hospitable for rodents. Removing any
food source from the shoreline can also be a good deterrent. Check with
your local DNR for additional guidance or possible restrictions.

15
Repairs
For large holes, tears or seam failures, contact RAVE Sports Customer
Service at 1-800-659-0790. Additional patches may be purchased at
www.ravesports.com. For minor holes or tears:
•Inflate the product and locate the leak by spraying the tube with
mild soapy water.
•Determine the hole size and cut a patch 1-2 inches (3-5 cm) wider
than the diameter of the hole. Make sure all corners of the patch
are rounded.
•Deflate the product and clean the patch and area around the hole
with rubbing alcohol. Let dry completely.
•READ AND UNDERSTAND THE WARNINGS ON THE GLUE
CONTAINER.
•Apply glue to the patch and the area around the hole. Let the glue
dry until it is tacky to the touch.
•Lay the product on a flat, hard surface and apply the patch.
Working from the center to the outer edge, rub out any air
bubbles between the patch and the product.
•Let the patch dry for at least 24 hours before attempting to inflate
the product.

16

17

18

19
WWW.RAVESPORTS.COM
RAVE SPORTS
A Revel Match, LLC Company
985 Aldrin Drive #301
Eagan MN, 55121
800.659.0790
June 2017