Raycon X90 Titan Installation instructions

Meet your X90 Titan.
Let’s get started.

HOW TO CONNECT YOUR
EARPHONES
1. Take your earphones out of the capsule. Both earphones
will connect automatically.
2. Turn on Bluetooth, search “Raycon X90 Titan” and click
it to pair.
3. Enjoy your Titan earphones!

HOW TO CHARGE YOUR
EARPHONES
1. Open the lid of the charging capsule.
2. Place the two earphones inside until the indicator lights on
the earphones flash. Red means charging, and blue means
fully charged.
3. Close the lid. It takes about 1 hour to fully charge the
earphones.

HOW TO CHARGE YOUR
CHARGING CAPSULE
1. You can charge your capsule in either two ways—wired or
wirelessly.
2. To charge with a wired cable, place the cable in the back
port and connect to a power source.
3. To charge wirelessly, simply place the capsule on a Qi wireless
charging pad (purchased separately).
4. The four lights indicate how much the capsule has been
charged. Once all lights turn white, the capsule is fully
charged.

TABLE OF CONTENTS
I. Introduction
II. What's Inside
III. Unit at a Glance
IV. Usage
A. Customization
B. Functions
C. Charging Schematic
D. Easy Pairing Connection
E. Right Earphone Single-Play Mode
F. How to Sync Volume on an Android Phone
G. Restore Factory Setting
V.FAQ and Additional Resources
VI. Safety Guidelines
VII. Specifications
VIII. Support
IX. Limited Warranty

I. INTRODUCTION
Welcome to your new Raycon X90 Titan Earphones!
At Raycon, we develop and design innovative electronics so
you can move and conquer your daily fast-paced life.
Before using your product, we strongly encourage you to fully
read through this user guide. You can also visit our support
center at
www.rayconglobal.com/support
This web page has more specific guidelines and helpful videos
for you to navigate your product.
For best performance, charge fully before first use.
Pairing ID: Raycon X90 Titan

II. WHAT’S INSIDE
Raycon X90 Titan Earphones (Left and Right)
Charging Capsule
Charging Cable
Silicone Gel tips
User Guide

III. UNIT AT A GLANCE

IV. USAGE
MSS M ML L LL
A. Customization
SS
Selecting the size of silicone gel tips:
The silicone gel tips with X90 earphones come in 7 sizes:
Double small, small, medium small, medium, medium large,
large and double large.Please select the right size according
to your preference and fit it over the earphones.

B. Functions
Left EarphoneRight Earphone
Single Press
Play / Pause
Answer / Hang up
Play / Pause
Answer / Hang up
2 Sec Hold
Power on / Siri
Reject Calls
Power on / Siri
Reject Calls
4 Sec Press
Power off Power off
Double click: Previous Song
Triple click: Volume +
Double click:Next Song
Triple click: Volume -
Double Press
You can also put the earphones into the capsule to power off

C. Charging Schematic
Charging for Earphones
Both lights remain red
Turn Blue then turn off
Charging
Fully Charged
Call / Play: about hours
Standby: about 2,000 hours
Charging for Earphones 5times
6
Charging Time: about 1hour

Charging for Capsule

2. Turn on Bluetooth,
search “Raycon X90 Titan”
Raycon X90 Titan
and click it to pair.
3. Enjoy your Titan Earphones!
1. Take your earphones out of
the capsule and both earphones
D. Easy Pairing Connection
will connect automatically.

search “Raycon X90 Titan-R”
E. Right Earphone Single-Play Mode
Raycon X90 Titan-R
Raycon X90 Titan-R

F. How to Sync Volume on an Android Phone
*Note: This function is available only to newer Android smartphones, and not in all models.
Please note that listening to high volumes of audio for a long period of times is not
recommended.
For newer Android smartphones (such as the Samsung S9 and
Note 8), you canexperience optimal audio quality by syncing
your volume in the Bluetooth settings.
1. After connecting your device in Bluetooth, click on “options”
in the upper right hand corner.
2. Click on ‘Media volume sync’.
3. Turn on.

G. Restore Factory Setting
Hold both buttons
together for 20 seconds
V. FAQ AND ADDITIONAL
RESOURCES
In the off state, hold the buttons of left and right earphones for
20 seconds to restore to factory settings.
For frequently asked questions about your device, simply go
to www.rayconglobal.com/support. Select the product and
you will find more resourses on how to operate your products
including helpful tips and videos.

VI. SAFETY GUIDELINES
Please follow the safety guidelines below at all times
when operating or caring for your device.
•Bewary of any edges, uneven surfaces, and metal parts, including on
accessories and product packaging, to prevent any possible injury or
damage.
•Listen to music at a proper volume to avoid hurting your hearing and
the earphones.
•Avoid storage in high temperatures, such as in ahot vehicle or in
direct sunlight.
•Donot expose the earphones or any of its supplied parts to rain or
other liquids.
•Donot drop or causeundue impact to the earphones.
•Donot modify, repair, or dismantle the product on your own.
•Donot use any dilutant or volatile liquid to clean the product.
•Donot use the product in ahazardous location.

VII. SPECIFICATIONS
Model Number: RBE790
Bluetooth Connection Name: Raycon X90 Titan
Bluetooth Version: 5.0
Power Input: DC 5V / 1A
Earphone Battery Capacity: 3.7V / 60mAh X 2
Charging Capsule Battery Capacity: 3.7V / 750mAh
Call / Play Time: About 6 hours
Charging Time: About 1 hour
Support Pofiles: HSP / HFP / A2DP / AVRCP
Sensitivity: 120 ± 5dB
Frequency Response Range: 20 - 20000Hz
Bluetooth Range: up to 10 meter

VIII. SUPPORT
IX. LIMITED WARRANTY
Formore information and instructions on how to get
warranty service, visit www.rayconglobal.com/warranty
If your device is not functioning correctly, please visit
www.rayconglobal.com/support for customer support,
and we will be more than happy to help you.

Thank you for choosing Raycon.