Raymarine i60 wind User manual

© 2019 Raymarine UK Limited
87220-2Document number:
10-2019Date:
English (en-US)
Installation instructions
Wind Vane
Long & Short Arm

T
rademarkandpatentsnotice
Raymarine,Tacktick,ClearPulse,Truzoom,SeaTalk,SeaTalkhs,SeaTalkng,andMicronet,areregisteredor
claimedtrademarksofRaymarineBelgium.
LIR,LightHouse,DownVision,SideVision,RealVision,HyperVision,Dragonfly,Element,Quantum,
Axiom,Instalert,InfraredEverywhere,TheWorld’sSixthSenseandClearCruiseareregisteredorclaimed
trademarksofFLIRSystems,Inc.
Allothertrademarks,tradenames,orcompanynamesreferencedhereinareusedforidentificationonlyand
arethepropertyoftheirrespectiveowners.
hisproductisprotectedbypatents,designpatents,patentspending,ordesignpatentspending.
airUseStatement
Y oumayprintnomorethanthreecopiesofthismanualforyourownuse.Y oumaynotmakeanyfurther
copiesordistributeorusethemanualinanyotherwayincludingwithoutlimitationexploitingthemanual
commerciallyorgivingorsellingcopiestothirdparties.
Softwareupdates
ChecktheRaymarinewebsiteforthelatestsoftwarereleasesforyourproduct.
www.raymarine.com/software
Productdocumentation
helatestversionsofallEnglishandtranslateddocumentsareavailabletodownloadin
PDFformatfromthewebsite:www.raymarine.com/manuals.
Pleasecheckthewebsitetoensureyouhavethelatestdocumentation.
Publicationcopyright
Copyright©2019R aymarineUKLtd.Allrightsreserved.
English(en-US)
Documentnumber:87220-2
AA;18843;2019-10-2915:26:02

Contents
Chapter1Importantinformation......................................................................................7
W
ateringress..............................................................................................................................7
Disclaimer....................................................................................................................................7
Declarationofconformity...........................................................................................................7
Warrantyregistration.................................................................................................................8
Productdisposal........................................................................................................................8
IMOandSOLAS.........................................................................................................................8
echnicalaccuracy....................................................................................................................8
Chapter2Documentandproductinformation.............................................................9
2.1Productdocumentation......................................................................................................10
Operationinstructions..........................................................................................................10
Displaysoftware...................................................................................................................10
Documentillustrations..........................................................................................................10
2.2Applicableproducts...........................................................................................................10
Windvaneproducts..............................................................................................................10
Windvanereplacements.......................................................................................................11
Compatibledisplays.............................................................................................................12
Compatibleconverterandpods...........................................................................................13
Partssupplied—Windvanetransducers.............................................................................13
Partssupplied—Replacementwindvaneassembly............................................................14
Chapter3Installation......................................................................................................15
3.1oolsrequired.....................................................................................................................16
3.2Selectingalocation............................................................................................................16
Warningsandcautions.........................................................................................................16
Locationrequirements..........................................................................................................16
Windvanedimensions...........................................................................................................17
3.3Mounting..............................................................................................................................17
Mounting................................................................................................................................17
Mountingthejunctionbox...................................................................................................20
3.4Replacinganexistingwindvane......................................................................................21
Improvedbaseandprotectivecapdesign..........................................................................22
Replacingwindvaneandbaseusingexistingcable...........................................................22
Replacingwindvaneandcable............................................................................................23
Replacingthewindvanearm...............................................................................................23
Protectivecap.......................................................................................................................23
Chapter4Connections...................................................................................................25
4.1Generalcablingguidance.................................................................................................26
Cabletypesandlength........................................................................................................26
Cablerouting.......................................................................................................................26
5

Strainrelief...........................................................................................................................26
Cableshielding....................................................................................................................26
4.2Cablerouting.....................................................................................................................27
Routingthecablethroughthedeckmast.............................................................................27
Routingthecablethroughasteppeddeckmast..................................................................27
Replacingspadeterminals..................................................................................................28
4.3Windvaneconnections....................................................................................................28
Chapter5Systemchecksandtroubleshooting...........................................................31
5.1roubleshooting.................................................................................................................32
5.2Winddatatroubleshooting..............................................................................................32
Chapter6Operation.......................................................................................................33
6.1Calibrationandlinearization.............................................................................................34
6.2Operationinstructions......................................................................................................34
Chapter7Maintenance..................................................................................................35
7.1Windvaneroutinechecks.................................................................................................36
WindVanemaintenance.......................................................................................................36
7.2Unitcleaninginstructions.................................................................................................36
Chapter8Technicalsupport.........................................................................................37
8.1Raymarineproductsupportandservicing......................................................................38
8.2Learningresources...........................................................................................................39
Chapter9Technicalspecification..................................................................................41
9.1Physicalspecification.........................................................................................................42
9.2Conformancespecification..............................................................................................42
Chapter10Sparesandaccessories..............................................................................43
10.1Windvanesparesandaccessories................................................................................44
6

Chapter1:Importantinformation
Warning:Productinstallationandoperation
•hisproductmustbeinstalledandoperatedinaccordancewiththeinstructions
provided.Failuretodosocouldresultinpersonalinjury,damagetoyourvessel
and/orpoorproductperformance.
•RaymarinerecommendscertifiedinstallationbyaRaymarineapprovedinstaller.
Acertifiedinstallationqualifiesforenhancedproductwarrantybenefits.Contact
yourRaymarinedealerforfurtherdetails,andrefertotheseparatewarranty
documentpackedwithyourproduct.
Warning:Potentialignitionsource
hisproductisNOapprovedforuseinhazardous/flammableatmospheres.Do
NOinstallinahazardous/flammableatmosphere(suchasinanengineroom
ornearfueltanks).
Warning:Switchoffpowersupply
Ensurethevessel’spowersupplyisswitchedOFFbeforestartingtoinstallthis
product.DoNOconnectordisconnectequipmentwiththepowerswitched
on,unlessinstructedinthisdocument.
Warning:Positivegroundsystems
Donotconnectthisunittoasystemwhichhaspositivegrounding.
Caution:Serviceandmaintenance
hisproductcontainsnouserserviceablecomponents.Pleasereferall
maintenanceandrepairtoauthorizedRaymarinedealers.Unauthorizedrepair
mayaffectyourwarranty.
W ateringress
Wateringressdisclaimer
Althoughthewaterproofratingcapacityofthisproductmeetsthestatedwateringressprotection
standard(refertotheproduct’s echnicalSpecification ),waterintrusionandsubsequentequipment
failuremayoccuriftheproductissubjectedtohigh-pressurewashing.Raymarinewillnotwarrant
productssubjectedtohigh-pressurewashing.
Disclaimer
Raymarinedoesnotwarrantthatthisproductiserror-freeorthatitiscompatiblewithproducts
manufacturedbyanypersonorentityotherthanRaymarine.
Raymarineisnotresponsiblefordamagesorinjuriescausedbyyouruseorinabilitytousethe
product,bytheinteractionoftheproductwithproductsmanufacturedbyothers,orbyerrorsin
informationutilizedbytheproductsuppliedbythirdparties.
Declarationofconformity
FLIRBelgiumBVBAdeclaresthatthefollowingproductsareincompliancewiththeEMCDirective
2014/30/EU:
•Shortarmwindvanetransducer,partnumberE22078
•Longarmwindvanetransducer,partnumberE22079
heoriginalDeclarationofConformitycertificatemaybeviewedontherelevantproductpageat
www.raymarine.com/manuals.
Importantinformation7

W
arrantyregistration
oregisteryourRaymarineproductownership,pleasevisitwww.raymarine.comandregisteronline.
Itisimportantthatyouregisteryourproducttoreceivefullwarrantybenefits.Y ourunitpackage
includesabarcodelabelindicatingtheserialnumberoftheunit.Y ouwillneedthisserialnumber
whenregisteringyourproductonline.Y oushouldretainthelabelforfuturereference.
Productdisposal
DisposeofthisproductinaccordancewiththeWEEEDirective.
heWasteElectricalandElectronicEquipment(WEEE)Directiverequirestherecyclingofwaste
electricalandelectronicequipmentwhichcontainsmaterials,componentsandsubstancesthatmay
behazardousandpresentarisktohumanhealthandtheenvironmentwhenWEEEisnothandled
correctly.
Equipmentmarkedwiththecrossed-outwheeledbinsymbolindicatesthatthe
equipmentshouldnotbedisposedofinunsortedhouseholdwaste.
Localauthoritiesinmanyregionshaveestablishedcollectionschemesunder
whichresidentscandisposeofwasteelectricalandelectronicequipmentata
recyclingcenterorothercollectionpoint.
Formoreinformationaboutsuitablecollectionpointsforwasteelectrical
andelectronicequipmentinyourregion,refertotheRaymarinewebsite:
www.raymarine.eu/recycling.
IMOandSOLA S
heequipmentdescribedwithinthisdocumentisintendedforuseonleisuremarineboatsand
workboatsNOcoveredbyInternationalMaritimeOrganization(IMO)andSafetyofLifeatSea
(SOLAS)CarriageRegulations.
Technicalaccuracy
othebestofourknowledge,theinformationinthisdocumentwascorrectatthetimeitwas
produced.However,Raymarinecannotacceptliabilityforanyinaccuraciesoromissionsitmay
contain.Inaddition,ourpolicyofcontinuousproductimprovementmaychangespecifications
withoutnotice.Asaresult,Raymarinecannotacceptliabilityforanydifferencesbetweentheproduct
andthisdocument.PleasechecktheRaymarinewebsite(www.raymarine.com)toensureyouhave
themostup-to-dateversion(s)ofthedocumentationforyourproduct.
8

Chapter2:Documentandproductinformation
Chaptercontents
•2.
1Productdocumentationonpage10
•2.2Applicableproductsonpage10
Documentandproductinformation9

2.
1Productdocumentation
hefollowingdocumentationisapplicabletoyourproduct:
AlldocumentsareavailabletodownloadasPDFsfromwww.raymarine.com/manuals
DescriptionP
artnumber
Windvanetransducerinstallationinstructions(hisdocument)
Installationofashortorlongarmwindvanetransducer
.andconnectiontoa
widersystemofmarineelectronics.
87220
L ongandshortarmwindvanetransducermountingtemplate87377
i60Installationandoperationinstructions
Detailstheconnectionandoperationoftheinstrumentdisplayinconjunction
withashortorlongarmwindvanetransducer .
81342
i70Installationandoperationinstructions
Detailstheconnectionandoperationoftheinstrumentdisplayinconjunction
withani C-5.
81357
i C-5Installationinstructions
Detailstheconnectionofashortorlongarmwindvanetransducertoawider
systemofmarineelectronics.
87138
LightHouse™3operationsinstructions
DetailscalibrationofwindtransducersusinganMFD .
81370
Operationinstructions
Fordetailedoperationinstructionsforyourproduct,refertothedocumentationthataccompanies
yourdisplay
.
AllproductdocumentationisavailabletodownloadfromtheRaymarinewebsite:
www.raymarine.com/manuals.
Displaysoftware
Ensureyourdisplaysoftwareisupdatedtothelatestversion.
oupdatedyourdisplaysoftwarerefertotheoperationsinstructionsforyourdisplay.
ForthelatestsoftwareforyourdisplayrefertotheRaymarinewebsite:www.raymarine.com/software
Documentillustrations
Y ourproductandifapplicable,itsuserinterfacemaydifferslightlyfromthatshownintheillustrations
inthisdocument,dependingonproductvariantanddateofmanufacture.
Allimagesareprovidedforillustrationpurposesonly.
2.2Applicableproducts
hisdocumentisapplicabletothefollowingproducts:
Windvaneproducts
Windvanestransducersareavailableinlongandshortarmvariants.
10

1Shortarm300mm(11.8in)windvanetransducerwith30m(98.4ft)cable—E22078
Providesbothwindspeedandwinddirectiondata.
2L ongarm600mm(23.6in)windvanetransducerwith50m(164ft)cable—E22079
Providesbothwindspeedandwinddirectiondata.
Windvanereplacements
hefollowingreplacementwindvaneassembliesareavailable .
1R eplacementshortarmwindvaneassembly—R28170
2R eplacementlongarmwindvaneassembly—R28171
Documentandproductinformation11

Note:
Windvanereplacementsarenotsuppliedwithanewcable
.Newcablescanbepurchased
separately:
•30m(98.4ft)cableassembly—A28162
•50m(164ft)cableassembly—A28163
Compatibledisplays
Acompatibleinstrumentdisplayisrequiredtocalibrateanddisplaywinddatafromyourwindvane
transducer
.Seebelowforcompatibleinstrumentdisplays.
InstrumentdisplayConnectionmethod
i70/i70Si C-5ortransducerpod
i60WindDirectconnection
S 70iC-5ortransducerpod
S 60+WindDirectconnection
S 70+iC-5ortransducerpod
Axiom™MFDs(i. e.:Axiom™/Axiom™Pro/Axiom™
XL)
iC-5only
Note:
AxiomMFDsmustberunningLightHouse™3version3. 11orgreater.
12

Compatibleconverterandpods
WindvanetransducerscanalsobeconnectedtotheSea
alkng®networkusingacompatible
converter.Winddatawillthenbeavailabletoalldisplaysconnectedtothesamenetwork.
1.i C-5(E70010).
2.S70(E22108)/S290(E22068)windtransducerpod.
Partssupplied—Windvanetransducers
hefollowingpartsaresuppliedwiththeshortandlongarmwindvanetransducers,partnumbers:
E22078andE22079.
Unpackyourproductcarefullytopreventdamageorlossofparts.Checktheboxcontentsagainst
thelistbelow.Retainthepackaginganddocumentationforfuturereference.
1.Cableassembly(includingwindvanebaseandprotectivecap .
•Shortarmwindvaneissuppliedwitha30m(98.4ft.)cable.
•Longarmwindvaneissuppliedwitha50m(164ft.)cable.
2.Shortarmwindvaneassembly/Longarmwindvaneassembly
3.Armretainingclip
4.Junctionbox
5.Doublesidedadhesivepadsx2
6.erminalblock
Documentandproductinformation13

7
.Documentationpack
8.4mmdrillbit
9.No4x3/8”panheadpoziscrews(junctionboxfixingsx6)
10.No10x3/4”panheadpoziscrews(basemountingfixingsx2)
11.Junctionboxgrommetsx2
12.40mmx4mmprotectivesleevex2
Note:
Fixingsareprovidedforvariousinstallationscenarios,youdonotneedtouseallofthesupplied
fixingstoinstallyourwindtransducer
.
P artssupplied—Replacementwindvaneassembly
hefollowingpartsaresuppliedwiththereplacementshortandlongarmwindvaneassemblies,
partnumbers:R28170andR28171.
Unpackyourproductcarefullytopreventdamageorlossofparts.Checktheboxcontentsagainst
thelistbelow.Retainthepackaginganddocumentationforfuturereference.
1.Baseandprotectivecap .
2.No10x3/4”panheadpoziscrews(basemountingfixingsx2)
3.Shortarmwindvaneassembly/Longarmwindvaneassembly
4.Documentationpack
5.Armretainingclip
6.Cablewasher
7.Cablenut
8.Cablenutspanner
14

Chapter3:Installation
Chaptercontents
•3.
1oolsrequiredonpage16
•3.2Selectingalocationonpage16
•3.3Mountingonpage17
•3.4Replacinganexistingwindvaneonpage21
Installation15

3.
1Toolsrequired
Productinstallationrequiresthefollowingtools:
1.P owerdrill
2.Pozidrivescrewdriver
3.Drillbit
Note:
heappropriatedrillbitsizeisdependentonthethicknessandmaterialofthemountingsurface .
3.2Selectingalocation
W arningsandcautions
Important:Beforeproceeding,ensurethatyouhavereadandunderstoodthewarningsand
cautionsprovidedintheChapter1Importantinformationsectionofthisdocument.
L ocationrequirements
Whenselectingalocationforyourwindtransduceritisimportanttoconsideranumberoffactors.
hetransducer'slocationmustensurethat:
•itisinstalledfacingforwards.
•itisinstalledonahorizontalsurface(Ifasurfacee.g.masttop,isotherwisesuitablebutnot
horizontal,makeupasuitablewedgedpiecetoprovidethenecessaryhorizontalsurface).
•itisinstalledashighaspossibleandawayfromanyequipmentwhichmayshieldthetransduceror
otherwisedisturbtheairflowtothetransducer.
•theremustalsobeaviablerouteforthetransducer’scabletoberoutedtothedisplayorconverter
itistobeconnectedto.
•thevaneandcupscanspinfreely.
•thereissufficientaccessforinstallationandservicing.
16

Windvanedimensions
Dimensionsfortheshortandlongarmwindvanesareshownbelow
.
ShortarmLongarm
A272mm(10 .70in)
B248mm(9 .76in)345.5mm(13.60in)
C38mm(1.50in)
D68mm(2. 70in)
E538.5mm(21.20in)803.5mm(31.63in)
F30m(98.4ft)50m(164ft)
3.3Mounting
Mounting
Followthestepsbelowtomountyourwindvane .
heunitmustbemountedonahorizontalsurface.Ifthemountingsurfaceisnothorizontal,createa
wedgepiecetomakethesurfacehorizontal.
Installation17

heunit’ scablecanberoutedprotrudingfromtherearofthebaseorunderneaththebaseas
shownbelow:
1.Cableprotrudingfromrear .
2.Cableprotrudingunderneath.
18

Note:
DoNO removetheprotectivecapfromthebaseconnectoruntilyouarereadytofitthewind
vanearm.
1.Decideonthecableroutingoptionthatsuitsyourinstallation.
2.Markthemountingsurfacebasedonyourcableroutingoption:
i.Option1—Placethebaseoftheunitinthedesiredlocation,withtheconnectionendfacing
directlyforwards,andmarkthepositionofthemountingholes.
ii.Option2—Usethesuppliedmountingtemplatetomarkthepositionofthemountingholes
andthecablehole .
3.Drillholesinthemountingsurfacebasedonyourchosencableroutingoption:
i.Option1—Drillaholeateachofthe2mountingholelocations.
ii.Option2—Drillaholeateachofthe2mountingholelocationsandan8mmholeforthe
cablerouting.
4.Unreeltheunit’scablefromthespindleitissuppliedon.
5.Ifoption2hasbeenchosenoryouneedtousethejunctionbox,youmayneedtoremovethe
spadeterminalsfromtheendofthecabletofeedthecablethroughtheholeinthemounting
surface.
6.Usingtheprovidedfixingssecuretheunit’sbasetothemountingsurface,ensuringthatthecable
doesnotgetsquashedbetweenthebaseandthemountingsurface.
7.Removetheprotectivecapfromtheconnectorinthebase,ensuringitstaysattachedtothebase.
8.Ensuringcorrectconnectororientation,insertthewindvaneassemblyintothebase.
9.Slidethelockingcollardownthearmtowardsthebase.
10.ightenthelockingcollarusingonehandandturningclockwiseuntiltight.
11.Slidetherubbercoverdownthearmandfittotheendofthelockingcollar.
Installation19

12.Usetheretainingcliptosecurethearmofthewindvane
.
13.R outethecablebacktothedisplay,usingthejunctionboxifrequired.
14.Ifyouhadtoremovethespadeterminalsthennewspadeterminals(notsupplied)mustbe
fittedtoeachwire.
15.Connectthespadeterminalstotherelevantconnectorsonthebackofthedisplay.
Mountingthejunctionbox
hejunctionboxcanbemountedusingthesuppliedscrewsordoublesidedadhesivepads.
hejunctionboxshouldbemountedbelowdecks,closetothecableentrypoint.
1. omountthejunctionboxusingthefixingsscrews(supplied)followthestepsbelow:
i.Holdthejunctionboxagainstthemountingsurfaceatthedesiredlocation.
ii.Markthelocationofthemountingholesonthemountingsurface.
iii.Drill2holesinthemountingsurfaceatthemarkedlocations.
iv.Holdingthejunctionboxinplace,securetothemountingsurfaceusingthesuppliedscrews.
2.omountthejunctionboxusingthedoublesidedpads(supplied)followthestepsbelow:
i.Removethebackingfromonesideofthedoublesidedadhesivepads
ii.Evenlyspacetheadhesivepadsandsticktotherearofthejunctionbox.
iii.Removethebackingfromtheoppositesideoftheadhesivepads.
iv.Holdthejunctionboxagainstthemountingsurfaceatthedesiredlocation.
v.Applyfirmpressuretothefrontofthejunctionboxtoensurethepadsadherethejunctionbox
tothemountingsurface.
3.Feedthenecessarycablesthroughthegrommetsinthejunctionbox.
4.Connecttherelevantwirestogetherinsidethejunctionboxusingthesuppliedterminalblock.
5.Placethelidontothejunctionbox.
6.Usethescrewsprovidedtosecurethelidtothejunctionbox.
20