Raywav Pro User manual

● Keep the headphones in a cool and dry place.
Its working temperature shall be -20 ~ 55 ℃ (68 ~ 131℉).
Working in outside of this temperance may shorten its service life.
● Charge the headphones before use if it has been kept idle for long.
● It is forbidden to tear, pick or beat the earphone rubber parts with
force, the damage or waterproof failure caused by this is not
covered by the warranty.
● High volume may cause sound distortion and damage your hearing.
● Keep the headphones away from hard and sharp objects to prevent
damage.
● Do not charge the headphones immediately after swimming as the
residual sweat in the charging port may damage the headphone
circuit. To reduce the risk of damage, please keep the charging port
dry before charging the headphones.
We provide one-year warranty, from the purchase date.
Packing List
Warranty
Maintenance
Specifications
Headphones 1 piece
Micro USB cable 1 piece
User Manual 1 piece
Model of LED Light
Color Status
The red indicator flashes 1 time Power on
The red indicator flashes 3 times Power off / Battery Low
Red (solid) Charging
Blue (solid) Charging Complete
The blue indicator is “breathing” In Working/Repeat All
The blue indicator flashes fast Repeat One Song
The blue indicator flashes once every 3 sec Shuffle Play
Flash quickly in red and blue alternately Pairing mode
Play Time 6 hours
Charging Time 2 hours
Standby duration 7 days
Connection range 10 m
Bluetooth version V 5.0
Speaker type Bone conduction
Speaker sensitivity 100 ± 3db
Microphone Sensitivity -40 ± 3db
Weight 45g / 1.6 ounces
As shown in below picture, put the
headphones around your head with the speakers
rubbing against your temporal bones rather than
lay it on top of your ears. If your ears can’t keep
the headphone, you can find two clasps in the
package, which will help you to fix the headphone.
The way to ear the headphone with the clasps are
shown as below picture (the dotted line is the goggles belt) :
① Power On/Off ② Mode Key ③ Volume + ④ Volume -
⑤ LED Indicator ⑥ Micro-USB Charging Port ⑦ Microphone
①
⑤
⑦
⑥
②③④
Product Overview
How to wear the headphones?
Please follow the steps to wear the headphone as:
1. Before wearing, please install the clasps to each arms of the
headphone ( There are L and R marks in the bottom of each clasp )
2. Then, wear a swimming cap and swim glasses.
3. Finally, put on the headphone around your ears and push the swim
glasses’belt into the groove of the clasps.
Thanks for purchasing “Raywav Pro” Stereo bone conduction headphones!
For more information, please visit our website: http://www.raywav.com
Raywav Pro manual To charge the headphone, connect it to a PC/charger with the
Micro-USB cable.
The LED light turns from red to blue when charging is completed.
Note:
1. Please charge the headphones with DC5V charger or computers.
Do not use chargers of DC9V, DC12V, DC24V to charge the headphones.
2. It is recommended to charge it fully for first use even though
battery level may not be 0 when you unpack the headphones.
3. Do not remove or replace the battery as the replacement will
damage the headphones and render the warranty invalid.
Charging
1. Power On/Off
Press key ① and keep it pressed for 5 seconds, the headphone will
be On or Off. After power on, the headphone will enter the Bluetooth
mode by default.
2. Pairing & Connection
When the headphone enters the Bluetooth mode for the first time or
the Bluetooth disconnected, the headphone will be waiting for pair,
the indicator light flashes red and blue alternately.
Then the user shall pick up the mobile phone, go to “setting” to pair
up the mobile phone with the headphone by choosing “Raywav Pro”
in the Bluetooth connection.
3. Switch between Bluetooth mode and Mp3
After power on, every time you press and hold the ② key (mode key)
for 3 seconds, the headphone will change to another mode, the
key definition of each mode is as below:
* Loop mode: Repeat All -> Repeat One -> Shuffle Play ->Repeat All
How to set up Raywav Pro?
Double
Press ①
Bluetooth
Mode Call Siri
Answer / End a call
(or Play / Pause)
Dial the
last call Next Song Volume + Prev Song Volume -
Volume -Prev SongVolume +Next Song
Change
Loop
mode*
Play / PauseMP3 Mode
Single Press ① Double
Press ②
Single
Press ②
Long
Press ③
Short
Press ③
Short
Press ④
Long
Press ④

● 耳机应当存放在阴凉干燥处，工作温度应在-20 ~ 55℃（4 ~ 131℉），
如工作在过冷或过热的环境下，可能会缩短耳机的寿命。
● 存储很长一段时间后，请在使用前再次充电。
● 请勿将产品接近尖硬物体，易损伤产品。
● 该耳机为IP68级防水，全身各部分均经过防水处理，但禁止用力撕拽，
抠，摔打耳机，经检查由此造成的损坏或防水失效，不在保修范围内。
● 过高的音量下听音乐可能会损伤您的听力，声音也可能会失真，请将音
量保持在适中位置。
● 运动过后请不要立即充电，请将充电口处残留的水甩干晾干后充电，否
则可能会因为短路造成不充电或产品损坏。
本产品享有自购买之日起1年的免费质量保证。
配 件 明 细
质 保 声 明
产品维护和保养
耳 机 规 格
Raywav 骨传导耳机 1 个
Micro USB 充电线 1 条
产品说明书 1 本
LED 指 示 灯
颜 色 状 态
红灯（闪烁一次） 开机
红灯（常亮） 充电
红灯（连续闪烁3下） 关机 / 提示电量低
蓝灯（常亮） 充电完成
蓝灯（呼吸） 使用中 / 全曲循环
蓝灯（快闪） 单曲循环
蓝灯3秒钟闪一次 随机播放
红、蓝灯交替快闪 配对中
播放时间 6 小时
完全充电时间 2小时
接收距离 10米
待机时间 7天
蓝牙版本 V 5.0
扬声器类型 骨传导式
扬声器灵敏度 100 ± 3db
麦克风灵敏度 -40 ± 3db
重量 45g
将耳机从头后部挂在耳朵上，如下图所示。
注意： 扬声器要贴在耳朵前面的额骨上，
而不是放在耳朵上。
如果您的耳朵无法固定耳机，我们在包装盒中还赠送了
专利卡扣帮助解决，佩戴方法如下图所示（虚线为泳镜带）：
① 开关机键 ② 多功能键 ③ 音量 + ④ 音量 -
⑤ LED 指示灯 ⑥ Micro-USB 充电端口 ⑦ 麦克风
产 品 描 述
佩 戴 方 式
耳机的固定步骤：
1. 佩戴前，请先将卡扣装在耳机两侧的前臂上（卡扣底部标识可区分左右）;
2. 然后戴上泳帽和泳镜 ;
3. 最后戴上耳机，并将泳镜带放入卡扣上方的凹槽里压住耳机，即可完成 ;
感谢您购买 “ Raywav Pro ” 智能骨传导立体声耳机产品！
更多资讯请访问我们的主页： http://www.raywav.com
Raywav Pro 说明书
将耳机通过Micro-USB充电线连接到电脑或充电器插座上的标准USB接口，
耳机将会在2小时内充满。
注意： 请使用DC 5V充电器和电脑给耳机充电，请勿使用DC 9V，DC 12V，
DC 24V等给本耳机充电。
耳机从包装盒里取出时可能会有一些剩余电量，但我们建议在第一次使用前
对其进行完全充电。
本耳机所用电池寿命不短于产品寿命，电池只能由专业回收设备取出，任何
试图取出或替换电池的行为将可能损坏耳机并影响到您的保修权利。
充 电
1. 开关机
长按 ① 开关机键（最大的按键）开/关机，开机后默认进入蓝牙模式。
2. 配对/连接
首次进入蓝牙模式或蓝牙连接断开时，耳机会进入待配对状态，此时指示
灯会出现红蓝交替快速闪烁，此时打开手机蓝牙设置，查找蓝牙设备，并
在结果中选择“Raywav Pro”，耳机会在几秒内连接成功。
3. 蓝牙/MP3模式切换
开机后，每长按 ② 键（多功能键）在两种模式中切换一次，每种模式的按键
定义如下：
双 击
① 键
双 击
② 键
单 击
② 键
长 按
③ 键
短 按
③ 键
短 按
④ 键
长 按
④ 键
短 按
① 键
蓝牙模式 呼叫Siri 接/挂电话
（或暂停/播放音乐）
回拨上
一个电话 下一曲 音量 + 上一曲 音量 -
音量 -上一曲音量 +下一曲
切换循
环模式*
暂停 / 播放MP3模式
* 循环模式为：全曲循环->单曲循环->随机播放->全曲循环
如 何 操 作
①
⑤
⑦
⑥
②③④