RCA RLDEDV2813-A-B User manual

28
RLDEDV2813-A-B

TV Base Stand assemble
17
17
17
18
19
18
2
2
7
3.2. Audio/Video Source Selection
3.1. Initial Installation
3.3. DTV Mode Operations
SETTINGS
Initial Setup
4.1.Customizing the PICTUERE Settings
4.2.Customizing the Audio Settings
4.3.Customizing theTIME Settings
4.4.Customizing the SETUP Settings
4.5.Customizing the Patental Settings
4.6.Customizing the TV Settings
20
21
24
27
30
39
41
PC Mode
31

Thread hole size M6 x 10 depth (TV Mounting Screw Size) on the TV.
Wall Mounting
1. Ensure that the selected wall is made of appropriate material and can support the
weight of the TV. Make sure there are no pipes or cables inside the wall on your
chosen position.
2. Obtain a suitable wall mounting bracket and mounting eyebolts (thread size M6x10)
and screws from your local hardware store.
3. Place the unit face down on a soft surface.
4. Remove the attached leg at the bottom of the TV by removing the 4 screws on the
leg cover.
5. Refit the cover securely by replacing the 4 screws into their original positions.
6. Fasten 4 eyebolts panel according to the
diagram.
7. Fasten the wall mounting bracket using screws onto the wall.
8. Connect the eyebolts and the wall bracket securely with strong rope
9. Carefully check that all fastenings are secure before releasing the TV.
1.2． TV PLACEMENT SETUP.
TV Stand Installation/Removal
1. Place the unit face down on a soft surface.
2. Gently position the glass base to the leg at the bottom of the TV.
3. Insert the column corresponding position with the threaded screw size M4 * 20(up*2pcs)
and M4*25(down*2pcs) fixed.
4. Fasten the 4 provided screws (screw size B4x14) to secure the stand to the TV according
to the diagram.
screw size M4 * 20(up)
screw size M4 * 25(down)
screw size
B4x14
4
100mm 100mm
200mm
200mm

play/pause picture
Eject disc
PC AUDIOHDMI2 VGAHDMI3 RFLR AUDIO
OUT
COAXIAL HDMI1
USB
(For Service)
VIDEO / Y
AUDIO
Pb
Pr
R
L
1. Headphones
10. AUDIO OUT R / L: Output
Audio L / R (left / right)
9. HDMI
11. Coaxial: Digital audio output
8. VGA: PC video input
5. AUDIO IN R/L: Stereo audio input
7. PC AUDIO: Connect it to the
audio output terminal of PC
4. Video: Video input
3. YPbPr: Connect to the YPbPr
video output terminal of DVD
6. RF: Antenna connection
2. USB Host port

Selectsthescreensize
sound from speakers
NUMBER KEYS:
tuned

adaptor
PC AUDIOHDMI2 VGAHDMI3 RFLR AUDIO
OUT
COAXIAL HDMI1
USB
(For Service)
VIDEO / Y
AUDIO
Pb
Pr
R
L
USB
(For Service)
VIDEO / Y
AUDIO
Pb
Pr
R
L

Note:Coaxial output
PC AUDIOHDMI2 VGAHDMI3 RFLR AUDIO
OUT
COAXIAL HDMI1
PC AUDIOHDMI2 VGAHDMI3 RFLR AUDIO
OUT
COAXIAL HDMI1
PC AUDIOHDMI2 VGAHDMI3 RFLR AUDIO
OUT
COAXIAL HDMI1
USB
(For Service)
VIDEO / Y
AUDIO
Pb
Pr
R
L

17 18
3.1. Initial Installation
The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.
Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons /to select the desired source
depending on the equipment you have connected (AV,
HDMI, VGA) or choose TV to enter these mode.
Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV and radio channels (press the /buttons to sort by group and
show only the DTV, the analog TV channels, Radio channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.
3.2. Audio/Video Source Selection
3.3. DTT Mode Operations
3. Initial Setup Customizing the PICTURE
4. SETTINGS
4.1.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the PICTURE.
3. Use the Ÿ/źbu ons to highlight an individual PICTURE ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The PICTURE menu includes the following :
Picture Mode
Contrast Control the diīerence between the brightness and darkest regions of the
picture.
Brightness Control the overall brightness of the picture.
Color Control the color.
Tint Controls the nt.
Sharpness In
1)ASPECT RATIO This feature changes the various aspects of the TV’s video.
(Aspects include wide, zoom, cinema, normal).
ϮͿEK/^Zhd/KEdŚŝƐĨĞĂƚƵƌĞƌĞĚƵĐĞƐŐĞŶĞƌĂůƉŝdžŝůĂƟŽŶďLJďůƵƌƌŝŶŐƚŚĞŵ
ϯͿzED/KEdZ^ddŚŝƐĨĞĂƚƵƌĞĂůůŽǁƐƚŚĞdsƚŽĂƵƚŽŵĂƟĐĂůůLJĂĚũƵƐƚƚŚĞ
contrast of the TV depending on the picture you are viewing.
crease this se ng to see crisp edges in the picture; decrease it for so
edges.
Color
Advanced
^ĞƫŶŐƐ
Temp. Cycles among color modes: Normal, Cool.Warm,
Cycle among picture display modes: Standard, Dynamic, Mild, user.
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA
Source Select

19 20
Customizing the Audio Customizing the TIMER Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the TIMER.
3. Use the Ÿ/źbu ons to highlight an individual TIMER ,usetheŻ/Źto
change the se and press the MENU to exit.
The TIMER menu includes the following op ons:
Sleep
Time Format
Auto Clock
Clock
Timer All
dŚŝƐŽƉƟŽŶĂĚũƵƐƚƐƚŚĞĚŝƐƉůĂLJĨŽƌŵĂƚĨŽƌƚŚĞƟŵĞ
dŚŝƐŽƉƟŽŶĂĚũƵƐƚƐƚŚĞƟŵĞĂŶĚĚĂƚĞŽĨƚŚĞdszŽƵŶĞĞĚƚŽĚŝƐĂďůĞ
hdK>K<ŝŶŽƌĚĞƌƚŽƵƐĞƚŚŝƐĨƵŶĐƟŽŶ
Please Note:
dŚĞd/DĨƵŶĐƟŽŶǁŝůůŽŶůLJŬĞĞƉĂĐĐƵƌĂƚĞƟŵĞŝĨƚŚĞdsŝƐƉůƵŐŐĞĚŝŶƚŽ
ĂƉŽǁĞƌƐŽƵƌĐĞ/ĨƚŚĞdsŝƐƵŶƉůƵŐŐĞĚŽƌƚŚĞƉŽǁĞƌƐƚƌŝƉŝƐƚƵƌŶĞĚŽī
ƚŚĞdsƐƟŵĞǁŝůůŶŽƚďĞĂĐĐƵƌĂƚĞ
dŚŝƐŽƉƟŽŶĞŶĂďůĞƐƚŚĞdsƚŽƐLJŶĐƟŵĞǁŝƚŚƚŚĞĂŶƚĞŶŶĂ
;WƵƚŝƚŽŶhdKŝĨLJŽƵŚĂǀĞĂŶĂŶƚĞŶŶĂĂƩĂĐŚĞĚƚŽƚŚĞds/ĨLJŽƵŚĂǀĞ
>Žƌ^d>>/dŽĨĂŶLJƚŚŝŶŐĞůƐĞƉůĞĂƐĞƵƐĞŵĂŬĞƐƵƌĞhdK>K<
ŝƐƚƵƌŶĞĚŽī
ow you to set up the sleep among: 5min, 10min, 15min,
30min, 60min, 90min, 120min, 180min, 240min and oī.
Time Zone Allow you to set up the sleep among: PaciĮc, AlasŬa, Hawaii,
EastĞƌŶ^ĂŵŽĂƚůĂŶƟĐEĞǁĨŽƵŶĚůĂŶĚ Central and Mountain.
Daylight Saving Time Allow you to turn on or oīthe daylight saving
4.2. 4.3.
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
to select the AUDIO.
3. Use the Ÿ/źbu ons to highlight an individual AUDIO ,usetheŻ/Źto
change the se and press the MENU to exit the menu.
The AUDIO menu includes the following op ons:
ƋƵĂůŝnjĞƌ^ĞƫŶŐƐ
MTS
AVL
Allow you to select among: Standard, Music, Movie and User.
Surround Allow you to select between Oīand On.
dŚŝƐĨĞĂƚƵƌĞĂĚũƵƐƚƐƚŚĞĂƵƚŽǀŽůƵŵĞůĞǀĞůĞƌĞŶĂďůŝŶŐǀŽůƵŵĞƉƌŽƚĞĐƟŽŶ
from overly loud commercials.
dŚŝƐĨĞĂƚƵƌĞĂĚũƵƐƚƐƚŚĞƐĞĐŽŶĚĂƵĚŝŽƉƌŽŐƌĂŵŵŝŶŐŝŶĂŶĂůŽŐĐŚĂŶŶĞůƐ
Digital Audio
Output
Allow you to select between PCM, RAW and OFF.
Audio Language Allow you to select audio language among: English, French and Spanish.

21 22
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the SETUP.
3. Use the Ÿ/źbu ons to highlight an individual SETUP ,usetheŻ/Źto
change the se and press the MENU to exit.
The TIMER menu includes the following op ons:
Menu Language Allow you to select menu language among: English, Français and Español.
Transparent
OSD Timeout
KƚŚĞƌ^ĞƫŶŐƐ
dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƟŵĞǁŚŝĐŚƚŚĞdsƐK^ŵĞŶƵĂƵƚŽŵĂƟĐĂůůLJŐŽĞƐŽī
Input PC signal Įrst, then press SOURCE bu on to select PC mode, press Ź
bu on to conĮrm.
H-Posi on Allow you to use the Ż/Źbu ons to adjust the H Posi on.
V-Posi on Allow you to use the Ż/Źbu ons to adjust the V Posi on.
Clock Allow you to prolong the image.
Phase Allow you to adjust the de
Auto Select “Auto” and press the Źbu on, the unit will
automa adjust all items to achieve a best eīect.
Close Cap on Use the źbu on to highlight the Close n item, then press the Ź
bu on to enter into the following menu.
CC Mode Allow you to select the CC Mode among: OnOī, and CC
on Mute.
Analog CC Allow you to select the basic sel on among: CC1, CC2,
CC3, CC4, Text1, Text2, Text3 and Text4.
Digital CC Allow you to select the advanced sel on among:
Service1, Service2, Service3, Service4, Service 5 and
Service6.
Op Use the źbu on to highlight the “Op on” item, then
press the Źbu on to enter into the following menu.
Customizing the SETUP Se ngs
4.4.
Exit
Input Label dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƐŽƵƌĐĞŶĂŵĞƐƚŽLJŽƵƌƉĞƌƐŽŶĂůƉƌĞĨĞƌĞŶĐĞ
dŚŝƐŽƉƟŽŶĐŚĂŶŐĞƐƚŚĞƚƌĂŶƐƉĂƌĞŶĐLJŽĨƚŚĞŵĞŶƵĂůůŽǁŝŶŐďĂĐŬŐƌŽƵŶĚds
images to show through.
Exit

23 24
Use the Ÿ/źbu ons to highlight the desired item, and
use the Ż/Źbu ons to select.
Restore Default Restore all se ngs in SETUP menu to factory se ngs.
Customizing the LOCK Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the LOCK.
3. Use the źbu on to highlight “Enter Password” item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er ngs, press menu
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
4-di
g
ital
p
assword
Input
The LOCK menu includes the following op ons:
Change Password Use the źbu on to select the “Change Password” item, then press the
Źbu on to enter into the following menu.
Input the new 4-digital password and input it again to conĮrm.
System Lock
Allow you to turn on or oīthe system lock.
If you turn oīthe system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
4.5.
Exit
Exit
Setup Wizard dŚŝƐŽƉƟŽŶĞŶĂďůĞƐƚŚĞdsƚŽƐŚŽǁLJŽƵƚŚĞƐĞƚƵƉǁŝnjĂƌĚŽĨƚŚĞdsĂŐĂŝŶ
Please Note:
Closed captioning is only available under AV and TV ports.
Closed captioning depends on your TV program’s support. Sometimes due to the
TV channel or the signal, Closed captioning will no
Exit

22
25 26
US Use the źbu on to highlight the “US” item, then press the Źbu nto
enter into the following menu.
TV Use the źbu on to highlight the “TV” item, then press
Źbu on to enter into the following menu.
Use the Ÿ/źbu ons to select the desired ra ng and
press the Źbu on to block or unblock ra ng.
MPAA The Movie ra ng (MPAA) is used for original movies rated
by the Mo Picture Associa on (MPAA) as broadcasted
on cable TV and not edited for television.
Use the Ÿ/źbu ons to select N/A, G, PG, PG-13, R,
NC-17 or X.
RATING DESCRIPTION
GGeneral Audiences. Movie is appropriate for
all ages.
PG Parental Guidance Suggested. May contain
material not suited for younger viewers
PG-13 Contains content that may not be
appropriate for viewers under the age of 13.
RRestricted. Contains adult content, no one
under 17 admi d without parent.
NC-17 No one 17 and under admi
XAdults only.
Canada Use theźbu on to highlight the “Canada” item, then press Źbu on to
enter into the following menu.
Canada Eng Use the Ż/Źbu ons to select among: OFF, C, C8+, G,
PG, 14+ and 18+.
Canada Fre Use the Ż/Źbu ons to select among: OFF, G, 8ans+,
13ans+, 16ans+ and 18ans+.
RRT Se ng
Reset RRT Al
This feature is a downloadable rating filter based on TV broadcasts.
With the transition of TV broadcasts to digital, future changes, and
enhancements in how TV shows are rated for content are possible.
low you to reset the RRT se ng.
Exit
Exit

27 28
Customizing the CHANNEL Se ngs
Select TV source for example. (Press SOUCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the Ż/Ź
bu ons to select the CHANNEL.
3. Use the Ÿ/źbu ons to highlight an individual CHANNEL ,usetheŻ/Źto
change the se and press the MENU to exit.
The CHANNEL menu includes the following :
Air/Cable
Allows you to select antenna between Air and Cable.
If you select “Cable”, the following items (Favorite, Show/Hide, Channel
NO., Channel Label and DTV Signal) are unable to use.
Auto Scan
If you select “Air” as input signal in Antenna item, you can press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Use the źbu on to highlight the “Auto Scan”, then press the Ź
bu on to search the channels automa cally.
The receivable channels will be stored automa cally.
When searching channels, press MENU to stop.
Favorite
Channel list
Allow you t add these channels which you desired as the favorite
channels. Use the Ÿ/źbu ons to highlight the “Favorite” item, then
press the Źbu on to enter into the following menu.
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to add or remove the highlighted channel as favorite.
This feature shows the list of stored channels.
Show/Hide
Allow you to show or hide the channels.
Use the Ÿ/źbu ons to highlight the “Show/Hide” item, then press the
Źbu on to enter into the following menu.
4.6.
Exit
Exit
Use theźEXWWRQWRKLJKOLJKWWKH´$XWR6FDQ´LWHPWKHQSUHVVŹ
EXWWRQto enter into the following menu.

922
Use the Ÿ/źbu ons to highlight the desired item, then press OK
bu on to show or hide the highlighted channel.
Channel No. Display the number of current channel.
Channel Label Display the lable of current channel.
5. PC Mode
Se ng up your PC so ware (based on Windows XP)
The Windows display-se ngs for a typical computer are shown below. But the actual screen on
your PC will probably be diīerent, depending upon your par cular version of Windows and your
par cular video card. But even if your actual screen looks diīerent, the same, basic set-up
informa on will apply in almost all cases.
1. First, click on “Control Panel” on the Windows start menu.
2. When the control panel window appears, click on “Appearance and Themes” and a display
dialog-box will appear.
3. When the control panel window appears, click on “Display” and a display dialog-box will
appear.
4. Navigate to the “Se ng” tab on the display dialog-box. The correct size se ng (res
Op 1360×768.
If a ver cal-frequency on exists on your display se ngs dialog box, the correct value is “60Hz”.
Otherwise, just click “Enter” and exit the dialog box.
Res n Horizontal
Frequency (KHz) Frequency (Hz) Standard Mode
720x400 31.47 70 DOS
640x480 37.9 60 VGA
800x600 37.9 60 SVGA
1024x768 48.4 60 XVGA
1366x768 64 60 SXVGA
Exit

CLASS 1 LASER PRODUCT

34