Reacher R2 Dimensions and installation guide
For our valued customers：
1
We would like to thank you very much for your purchase
from Reacher. The utmost care has gone into the design and
manufacture of your R2. Please read all of these instructions
carefully and keep these in a safe place for future reference.
The R2 helps create your baby’s perfect sleep environ-
ment. It can soothe your baby with any one of its 31 soothing
sounds, 7-colors and multiple modes of night light. It is also
suitable for children, adults, and senior citizens as it is easy
to use and helpful for getting a good night’s sleep.
2
Technical Information
Power Requirements
Frequency Response
Product Dimensions
60HZ-20KHZ
5 Volts, DC, 5W
D 117*H 85mm
Features
31 Soothing Sounds
8 Colors Night Light
15 Level Adjustable Volume
Fully Controllable Brightness Adjustment for Nightlight
Breathing Light
Sleep Timer
Earphone/Headphone Jack
Memory Function
3
Earphone Jack
DC5V Power Socket
Button Explanation
Power On/Off
Power Indicator
Timer indicator
Timer/Factory
Reset
Light Color
Light On/Off/
Fan Sounds
VOL-
VOL+
White Noises
Natural Sounds
4
Step One: Plug the adapter into a power source. You can
use a household outlet or a USB port (like on a PC, Iaptop,
a USB wall outlet or a car USB outlet).
Step Two: Turn your R2 on by pressing the “ ” button.
The orange LED will light up, indicating your R2 is on.
Setting It Up
R2 is on
5
Pressing the “ ” button will play white noise. Press
the button once more to cycle to the next white noise.
There are 7 white noises.
Pressing the “ ”button will play nature sound. Press
the button once more to cycle to the next nature sound.
There are 17 nature sounds.
Pressing the “ ”button will play fan sound. Press the
button once more to cycle to the next fan sound. There are
7 fan sounds.
Press the “ ” button to decrease the volume. Press
the “ ” button to increase the volume. There are 15
levels volume, from mute to the maximum volume.
Picking Your Sounds
6
Here is the list of tracks：
Track List
Note:
To signal a return to the first White Noise, Fan Sound, or
Nature Sound, the machine will play a short ringtone.
When you increase the volume to the maximum level, you
will hear a short jingle.
White Noises Nature Sounds
Lowest Pitch
White Noise
Highest Pitch
White Noise
/
/
/
/
/
Fan sounds
1
2
3
4
5
6
7
8
9
Gentle Waves
Lullaby
Music Box
Shush
Fetal Tone
Heart Beat
Forest
Summer Night
Rain
Thunderstorm
Wind
Campfire
Drip-drop
Pendulum
Ocean Waves
Brook
Train
Micro Fan
Industrial Fan
Vintage Fan
Wall Mount Fan
Exhaust Fan
Desktop Fan
Cooling fan
1
2
3
4
5
6
7
/
/
1
2
3
4
5
6
7
/
/
10
11
12
13
14
15
16
17
/
7
Picking Your Night Light
Note:
You can not adjust the brightness of the light when using
the breathing light mode.
Press the “ ” button to turn on the night light. Press
the button again to enter the breathing light mode, and
then again to turn off the night light. In the breathing light
mode, the light will gradually change from brightest to
darkest, then from darkest to brightest.
Press and hold the “ ” button to select the bright-
ness of night light. This will start a cycle between brightest
and darkest. When you’ve reached the desired brightness,
just release the button.
Press the “ ”button to select the specific color desired.
Press the button again to cycle to the next color. There are
8 colors：red, yellow,orange, green, cyan, blue, purple
and warm white.
Press and hold the “ ”button for 1 second to turn on
the 8 colorful lights. In this mode, the colors automatically
cycle from one to the other.
You can still turn on the night light by pressing the
“ ”button even when your R2 is power off. This is to
help you use the night light only without sounds.
8
Timer and Factory Reset
When you use the timer, the sound will gradually fade
once the preset sleep time comes.
Using the Timer
Press repeatedly the “ ”button to select a sleep timer
ranging from1H, 2H, 3H to enter sleep mode. The LED
light of the selected timer will light up accordingly. If you
want to leave your R2 on all night, please press the
“ ”button until there is no LED light on.
Set a timer
Memory Function
Performing a Factory Reset
Here are the factory default settings:
Press and hold the “ ” button for 5seconds, your
sound, volume and timer settings will go back to the
default.
The default sound: Gentle Waves
The default volume of sound: Level 10
The default timer: Off
The memory function will save your last sound, light color,
light mode, timer, volume, brightness settings in case of a
power outage. Your last settings remain saved when your
power comes back.
9
10
Using the Earphone/Headphone Jack
The earphone/headphone jack is on the back of the
machine, compatible with the 3.5mm headset device.
Customer Support
Your R2 comes with a one year warranty. Your satisfaction is
our top priority. If you have any issue with your R2, please
best to address your issue within 24 hours. Thank you again
for purchasing R2 from Reacher. Sweet dreams!
Other manuals for R2
1
Table of contents
