READY To ASSEMBLE SLAT KIT User manual

02
A
AC
PARTS LIST
SLAT SECTION
CENTER RAIL
TALL SUPPORT LEG
SHORT SUPPORT LEG
2 SET
2 PCS
4 PCS
4 PCS
01
02
03
04
C
Allen wrench
Assemble support leg (03 / 04) and center rail (02).
Assemble bed frame according to bed assembly instructions.
If using mattress and foundation set the bed up low and use short support leg.
If using Storage Drawers or Trundle Bed choose the tall support leg.
Using Allen screw (A).
Tighten with the Allen wrench (C).
Repeat for other center rail.
Page 1 of 2
03 / 04
03 / 04
HARDWARE
ABC
1 1/2” Allen screw - 8 pcs
Spare - 1 pc
1 1/4” Wood screw - 8 pcs
Spare - 2 pcs
Allen wrench - 1 pc
Spare - 1 pc
01
02
03
03
04
04
SLAT KIT FULL BED
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN
SCREW OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
ASSEMBLY INSTRUCTION
( FULL )
Before assembling your bed slat kit, please read through these
instructions carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips head screwdriver and an allen wrench.
A
1 1/2” Allen screw
READY
ASSEMBLE
TO
PO :
Adult assembly
Step 1
Step 2

Page 2 of 2
Step 3
Step 4
Attach center rail (02) to slat kit (01).
Using Allen screw (A), tighten with the Allen
wrench (C).
Repeat for section 2.
Lay the slat kit (01) onto the bed.
Screw slat kit (01) to side rail, using wood screw (B).
Tighten with Phillips head screwdriver.
B
A
A
01
01
B
1 1/4” Wood screw
SECTION 1
SECTION 2
Phillips head
screwdriver
Customer supplied
Be sure the space between slats is even.
If using a Trundle Bed attach center rail off center
as shown. Repeat for section 2.
SECTION 1
Be sure to align slat kit evenly with both
ends of ledger strip.
02
B
A
A
A
A
1 1/2” Allen screw
C
Allen wrench
SLAT KIT FULL BED
Adult assembly
Adult assembly