Real-El OTG 0.1m User manual

USER’S MANUAL
COPYRIGHT
© 2016. ENEL GROUP OU .
This Manual and information contained in it are copyrighted. All rights reserved. All trademarks are the
property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The
information of this Manual is given on “as is” terms. The author and the publisher do not bear any
liability to a person or an organization for loss or damages, which have arisen from the information
contained in the given Manual.
PURPOSE
The USB OTG 0.1m adapter is designed to connect mobile devices to peripheral USB devices as a USB
connector to USB micro. It conforms to USB 2.0 standard.
FEATURES
• Compatible with every USB OTG-enabled mobile device
• Micro USB to connect mobile devices
• Conform to USB 2.0 standard
CONNECTION AND OPERATION
Note. Before using check that your mobile device supports USB OTG standard.
1. Connect the USB OTG adapter to USB Micro of your mobile device, as shown in the connection
diagram below.
2. Connect a peripferal USB device to the adapter USB jack (see connection diagram).
Technical support: www.real-el.com
1
ENG
OTG USB 2.0 Cable
2
to Micro USB
USB OTG
adapter
1
Mobile
device
USB device
to USB AF adapter
Connection diagram

Note. Technical specifications given in this table are supplemental information and cannot
give occasion to claims. ТМ REAL-EL production is improved constantly, therefore Technical
Specifications are subject to change without prior notice.
TECHNICAL SPECIFICATIONS
ENG
Technical support: www.real-el.com
2
Model: OTG 0.1m
Manufacturer: ENEL GROUP OU, Katusepapi tn 6, Lasnamäe linnaosa, Tallinn, Harju maakond,
11412, Estonia. Made in China.
® Registered Trademark of ENEL GROUP OU. Estonia.
OTG USB 2.0 Cable
Cable lenght, m
Connector type
0.1
Micro USB BM, USB AF