real living FP-51106D User manual

l i v i n gTM
CAST IRON WOOD BURNING CHIMINEA
ASSEMBLY INSTRUCTION
SKU#: 810566049
MFG# FP-51106D
Questions, problems, missing parts? Before returning to the store,
Call Yayi Customer Care. at
855-600-9294
From 9:00 AM to 5:00 EST or email
[e-mail]

TOOLS REQUIRED ( Not Included )
PLEASE READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE ATTEMPTING TO ASSEMBLE,
OPERATE OR INSTALL THE PRODUCT.
WARNINGS:
WARNING: This product can expose you to chemicals including carbon black, which is known to
the State of California to cause cancer, and carbon monoxide, which is known to the State of
California to cause birth defects or other reproductive harm. For more information go to:
www.P65Warnings.ca.gov.
SAFETY INFORMATION
Phillips
screwdriver
!
Wrench
This chiminea is intended for outdoor use only, never burn in vehicles, tents or indoor.
Do not use the chiminea to cook food, the chiminea is not designed for grilling food.
This chiminea is intended to burn wood logs only. Do not use on wooden decks. Do not burn
coal, leaves, or other combustible materials in the chiminea. Keep away from combustible
materials.
Not for use by children. Keep children and pets away from the chiminea.
The chiminea is hot. Use with caution. Do not touch the hot chiminea with bare hands.
Never leave the burning chimenea unattended, and always extinguish the fire completely.
Do not use chiminea near flammable or combustible objects or materials.
When the chiminea is in use, the handle on the mesh screen can reach extreme
temperatures that can cause serious injury to an unprotected hand. Use a poker or an
appropriate heat resistant glove or pad when handling.
The poker handle may become hot during and after use.
Check local fire regulations and municipal by-laws for safe use.
Some parts may contain sharp edges—especially as noted in the manual. Wear protective
gloves if necessary.

PARTS LIST
HARDWARE LIST
No. PARTS Qty
A Ring 1
B Chimney Cap 1
C Chimney Flue 1
G Legs 4
AA
No. Hardware Qty
AA M6*12mm Bolt 4
BB M6*18mm Bolt 11
A
B
C
D
E
F
G
H
D Chimney Top 1
E Mesh Screen 1
F Fire Bowl 1
H Ash Tray 1
I Poker 1
DD
BB
CC
CC M6*25mm Bolt 8
DD M6 Nut 20
I

ASSEMBLY
Step1: Insert the Ring (A) into the hole of the chimney cap(B) by using M6 nut (DD).
Step 3: Attach the ash tray (H) to the legs (G) using M6x12 mm bolts (AA). Tighten each bolt and
nut at this time.
A
B
DD
Step 2: Attach the legs (G) to the fire bowl (F) using M6x18mm bolts (BB) and M6 nuts (DD). Hand
tighten the bolts and nut. Do not over-tighten.
F
G
DD
BB
G
H
AA

ASSEMBLY
Step4: Attach the mesh screen (E) to fire bowl (F) using M6x25 mm bolts (CC) and M6 nuts (DD).
Tighten each bolt and nut.
Step 5: Attach the chimney top (D) to mesh screen (E) using M6x25 mm bolts (CC) and M6 nuts
(DD). Tighten each bolt and nut.
Step 6: Attach the chimney flue (C) to chimney top (D) using M6x18 mm bolts (BB) and M6 nuts
(DD). Tighten each bolt and nut .
D
E
F
DD
CC
ECC
DD
D
E
DD
BB

ASSEMBLY
Step7: Place the chimney cap (B) on the top of the assembled chiminea. Put the poker(I) near
your chiminea for use any time, now the Chiminea is ready to use.
B
I

Operating Instruction
WARNING: Before using this outdoor chiminea, make sure you have read, understand and
are following all information provided in the important Safeguards presented on page 2. Failure
to follow those instructions can cause death, serious injury or property damage.
Lighting Instructions：
CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or
enhance an existing fire.
WARNING: Do NOT burn over 5 lbs untreated wood or fire logs in this chiminea.
Tending the fire:
You may need to shift and/or add logs for an ideal experience.
CAUTION: Do NOT place hot fire pit tools onto combustible surfaces such as grass,
wooden deck or furniture.
1. Using heat resistant gloves and long handled fire pit tools, carefully remove the spark guard.
2. While using a long handled fire pit tool, shift coals and logs to allow additional airflow.
CAUTION: Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight
or enhance an existing fire.
3. Wait until glowing coals have developed before adding any additional wood. If additional wood
is required, place wood on top of coals. Be careful not to shift ashes.
4. Using heat resistant gloves and long handled fire pit tool. Carefully replace the spark guard.
Extinguishing:
1. Allow fire to burn itself out.
2. Do NOT use water to extinguish as this is dangerous and can cause damage to the outdoor
chiminea .
Maintenance:
• To extend the life of your chiminea , clean it after each use .
• To Protect chiminea finish, use a soft cloth in lieu of bare h ands while handling.
• Clean the fire bowl after each use once ashes have cooled.
Care and Cleaning:
• Do not attempt to clean the chiminea, until the fire is comple tely out and cooled completely.
• Use a soft cloth to wipe the fire pit and poker.
• Do not attempt to clean while hot.
Storage:
• Do not attempt to move the chiminea, while it is hot or in use.
• Store assembled in a cool, dry location away from children and pets.
!
!
!
!
!