real living FT-31671 User manual

l i v i n gTM
26 IN. ROUND DEEP BOWL FIRE PIT
ASSEMBLY INSTRUCTION
ITEM#: 810565966
SKU# FT-31671
Questions, problems, missing parts? Before returning to the store,
Call Yayi Customer Care. at
855-600-9294
From 9:00 AM to 5:00 EST or email
[e-mail]

TOOLS REQUIRED ( Not Included )
PLEASE READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE ATTEMPTING TO ASSEMBLE,
OPERATE OR INSTALL THE PRODUCT.
WARNINGS:
This firebowl is intended for outdooruse only, never burn in vehicles, tents orindoor.
Do not use the fire bowl to cook food, the firebowl is not designed for grilling food.
This firebowl is intended to burnwood logs only. Do not use on wooden decks. Do not burncoal,
leaves, or other combustible materials in the firebowl.
Keep away from combustible materials .
Not for usebychildren. Keep children and pets away from the firebowl.
The firebowl is hot. Use with caution. Do not touch the hot firebowl with bare hands.
Never leave the burning firebowl unattended, and always extinguish the firecompletely.
Do not use firebowl near flammable or combustible objects ormaterials.
When the firebowl is in use, the handle on the mesh screen can reach extreme temperatures that can
causeserious injury to an unprotected hand. Use a pokeror an appropriate heat resistant glove or
pad when handling.
The poker handle may become hot during and after use.
Check local fire regulations and municipal by-laws for safe use.
Some parts may contain sharp edges—especially as noted in the manual. Wear protective gloves if
necessary.
WARNING: This productcan expose you to chemicals including carbon black, which is known to
the State of California to causecancer, and carbon monoxide, which is known to the State of
California to cause birth defects orother reproductive harm.For more information go to:
www.P65Warnings.ca.gov.
SAFETY INFORMATION
Phillips
screwdriver
!

PARTS LIST
HARDWARE LIST
No. PARTS Qty
A Handle
B Mesh Cover 1
C Fire Bowl 1
D Base 1
E Poker 1
1
A
B
C
D
E
BB
AA
No. Hardware Qty
AA M6 Nut 1
BB M6*10mm Bolt 4

ASSEMBLY
Step1: Attach Handle (A) to Mesh Cover (B) using M6 Nut (AA). Fully tighten the nut.
Step 2: Attach Fire Bowl (C) to Base (D) using M6 x 10mm Bolts (BB). Tighten all the hardware.
Step 3: Put Mesh Cover (B) on the Fire Bowl (C). Keep Poker (E) near the fire pit for use anytime.
Now the fire pit is ready for use.
AA
A
B
BB
C
D