Real Tone Technology RS530 User manual
User Manual
RS530 VoIPPhone
AdvancedBusiness VoIPPhone
ForIPPBXsolutions
Real ToneTechnologies Co.,Ltd
Tel: +8675583501950
E-mail: support@realtonetech.com
www.realtonetech.com
Version:V1.7.90.72
2009Real Tonetechnologies Co,. Ltd
All rightsreserved.
Thisdocument issuppliedbyRealtoneTechnologyCo., Ltd,Nopartof this
documentmaybereproduced,republishedorretransmittedinanyformor
byanymeanswhatsoever,whetherelectronicallyormechanically,
including,butnot limitedto,bywayofphotocopying,recording, information
recording orthroughretrievalsystems,withouttheexpress written
permissionofRealtoneTechnologyCo.,Ltd.RealtoneTechnologyCo.,Ltd
reservestherighttorevisethisdocumentandmakechangesatanytime
and withouttheobligationtonotifyanypersonand/orentityofsuch
revisionsand/orchanges. Product speci cationscontainedinthisdocument
aresubjecttochangewithoutnotice.
-2 -
Safety Notices
Pleasereadthefollowingsafetynoticesbeforeinstallingorusingthisphone.Theyarecrucialfor
thesafeandreliableoperationofthedevice.
lPleaseusetheexternalpowersupplythatisincludedinthepackage.Otherpowersupplies
maycausedamagetothephone, affectthebehaviororinducenoise.
lBeforeusingtheexternalpowersupplyinthepackage,pleasecheckwithhomepower
voltage. Inaccuratepowervoltagemaycausefireanddamage.
lPleasedo notdamagethepowercord.If powercordorplugisimpaired,donotuseit,it may
causefireorelectricshock.
lTheplug-socketcombinationmustbeaccessibleatall timesbecauseitservesasthemain
disconnectingdevice.
lDonotdrop,knockorshakeit. Roughhandlingcanbreak internalcircuit boards.
lDonotinstall thedevice inplaceswherethereisdirectsunlight.Alsodonotputthedevice
oncarpetsorcushions. Itmaycausefireorbreakdown.
lAvoidexposurethephonetohightemperature,below0 orhighhumidity.Avoidwetting
theunit withanyliquid.
lDonotattempttoopenit.Non-experthandlingofthedevicecoulddamageit.Consult your
authorizeddealerforhelp, orelseit maycausefire, electricshockand breakdown.
lDonotuseharshchemicals,cleaningsolvents,orstrong detergentstocleanit.Wipeit witha
softcloththathasbeenslightlydampenedinamildsoapand watersolution.
lWhenlightning,donottouchpowerplugorphoneline, it maycauseanelectricshock.
lDonotinstall thisphoneinanill-ventilatedplace.
lYou areinasituationthatcouldcausebodilyinjury.Beforeyouworkonanyequipment,be
awareofthehazardsinvolvedwithelectricalcircuitryandbefamiliarwithstandardpractices
forpreventingaccidents.
-3 -
TableofContent
1. INTRODUCINGRS530VOIPPHONE.......................................................................................5
1.1. THANKYOUFORYOUR PURCHASING RS530............................................................................5
1.2. DELIVERY CONTENT ...............................................................................................................5
1.3. KEYPAD...................................................................................................................................5
1.4. PORTFORCONNECTING ..........................................................................................................7
2. INITIALCONNECTINGAND SETTING..................................................................................8
2.1. CONNECTTHEPHONE..............................................................................................................8
2.1.1.Connecttonetwork ..........................................................................................................8
2.1.2.Poweradaptorconnection................................................................................................9
2.2. BASIC INITIALIZATION............................................................................................................9
2.2.1.Networksettings...............................................................................................................9
3. RS530 SBASIC OPERATION..................................................................................................12
3.1. ANSWERCALLS .....................................................................................................................12
3.2. PLACECALLS ........................................................................................................................12
3.3. END CALLS ............................................................................................................................13
3.4. CALLTRANSFER....................................................................................................................14
3.5. CALLHOLD ...........................................................................................................................14
3.6. 3-WAYCONFERENCECALL ....................................................................................................14
3.7. SWITCHBOARD OPERATORFEATURE ....................................................................................14
3.8. CALLRECORDS .....................................................................................................................15
4.WEBCONFIGURATION..........................................................................................................16
4.1. INTRODUCTIONOFCONFIGURATION .....................................................................................16
4.1.1.Waystoconfigure ..........................................................................................................16
4.1.2.PasswordConfiguration.................................................................................................16
4.2. SETTINGVIAWEBBROWSER..................................................................................................16
4.3. CONFIGURATIONVIA WEB...................................................................................................17
4.3.1.BASIC............................................................................................................................17
4.3.1.1. Status .....................................................................................................................................17
4.3.1.2.Wizard...................................................................................................................................17
4.3.1.3. CallLog..................................................................................................................................19
4.3.1.4.MMISET...............................................................................................................................19
4.3.2.Network..........................................................................................................................20
4.3.2.1.WAN Config ..........................................................................................................................20
4.3.2.2. LANConfig............................................................................................................................22
4.3.2.3.QosConfig.............................................................................................................................22
4.3.2.4. ServicePort............................................................................................................................25
4.3.2.5. DHCPSERVER.....................................................................................................................26
4.3.2.6. SNTP......................................................................................................................................27
4.3.3.VOIP..............................................................................................................................28
-4 -
4.3.3.1. SIPConfig..............................................................................................................................28
4.3.3.2.IAX2Config...........................................................................................................................32
4.3.3.3. StunConfig............................................................................................................................33
4.3.3.4. DIALPEERsetting ...............................................................................................................34
4.3.4.Phone.............................................................................................................................37
4.3.4.1. DSPConfig.............................................................................................................................37
4.3.4.2. CallService............................................................................................................................38
4.3.4.3. DigitalMapConfiguration ....................................................................................................40
4.3.4.4.PhoneBook............................................................................................................................42
4.3.4.5.FunctionKey..........................................................................................................................42
4.3.5.Maintenance..................................................................................................................44
4.3.5.1. AutoProvision .......................................................................................................................44
4.3.5.2. SyslogConfig.........................................................................................................................45
4.3.5.3. ConfigSetting........................................................................................................................45
4.3.5.4. Update....................................................................................................................................46
4.3.5.5. AccountConfig......................................................................................................................47
4.3.5.6. Reboot....................................................................................................................................48
4.3.6.Security..........................................................................................................................49
4.3.6.1.MMIFilter.............................................................................................................................49
4.3.6.2.Firewall..................................................................................................................................50
4.3.6.3. NATConfig............................................................................................................................51
4.3.6.4. VPNConfig............................................................................................................................54
4.3.7.Logout............................................................................................................................55
5. CONFIGURATIONVIA KEYPAD .................................................................................................56
5.1. Keypad introduction..........................................................................................................56
5.2. Menu Tree........................................................................................................................56
6. APPENDIX.................................................................................................................................56
6.1. SPECIFICATION .....................................................................................................................57
6.1.1.Hardware.......................................................................................................................57
6.1.2.Voicefeatures ................................................................................................................57
6.1.3.Networkfeatures............................................................................................................58
6.1.4.Maintenanceandmanagement......................................................................................58
6.1.5.Specialfeatures..............................................................................................................58
6.2. DIGIT-CHARACTERMAPTABLE .............................................................................................58
-5 -
1. IntroducingRS530 VoIP Phone
1.1. ThankyouforyourpurchasingRS530
ThankyouforyourpurchasingRS530, RS530 isafull-featuretelephonethatprovidesvoice
communicationoverthesamedatanetworkthatyourcomputeruses.Thisphonefunctionsnot
onlymuchlikeatraditionalphone,allowingtoplace andreceivecalls,and enjoyotherfeatures
thattraditionalphonehas,butalsoit ownmanydataservicesfeatureswhichyoucouldnotexpect
fromatraditionaltelephone.
Thisguidewill helpyoueasilyusethevariousfeaturesandservicesavailableonyourphone.
1.2. DeliveryContent
Pleasecheckwhetherthedeliverycontainsthefollowingparts:
Thebaseunit withdisplayandkeypad
Thehandset
Thehandsetcable
Thepowersupply
TheEthernetcable
TheUserManual(youmaydownloadfromour website)
IPPhonearedesignedtolook likeconventionalphones,thefollowingphotoshowsabroad
overviewoftheIPPhone.
1.3. Keypad
Key Keyname FunctionDescription
Navigation
Navigationkeyassistusersforoperating...
Inidlestatetheyhavespecialfunction
Left: CheckingIncomingcall
Up:CheckingMissedCall
Right: Checkinglinestatus
Down:CheckingIPinfo
OK:Enterintothephone'smenu
Releasekey
Press RLS, thephonewillskiptostand-bymode.
Note:DO NOTPress RLSduringtheconfigurationprocess,or
elsephonewill notsavetheconfigurationmodifiedandreturn
tostand-bystatus.
PhoneBook
Access tophonebook,checktherecordlistandaddnew
recordsand revisetherecord.Whencheckthephonebook
record, press thiskeyagainwill returntoidlemode.
Envelope LEDinside, ifblinksreminduserhavenewvoicemail.
Hold Temporarilyholdtheactivecall duringthetalking;press the
keyagainmightreleasethecall. (Pleasereferto3.5. -callhold
-6 -
formoredetails). Inidlemode,press thiskey,LCDwill show
DoNotDisturb”,andthisphoneissettobeNodisturbing
mode.Press thiskeyagaintocancelthisfunction.
Transfer
Usethekeytorealizeblindtransferorattendedtransfer please
refersto3.4.-call transferfor moredetails).Intheidlemode,
press thiskey,LCDwill show”call forward”.Afterthis
indicationdisappears,Usercanconfiguretheforwardphone
no.ofSIP1orSIP2. Press Soft2(ON)toenabledcall forward
functionandsetittoalwaysmode;Press Soft1(OFF)toclose
thefunctionofforward
mute Press thiskeyincallingmode,youcanheartheotherside,and
theothersidecannothearyou
Line1/2/3
HereisThree SIPlines,usercouldselectanyonetomakethe
call ,ifit hasbeenregistered
Volume-/+ Turndownorturnupthevolumebypressingthesetwokeys
Redial
1,Inthehookoff /hands-free mode,usethekeytodialthelast
call number;
2,Instand-bymode,it hasafunctiontochecktheOUTGOING
CALL
Hands-free
Makethephoneintohands-free mode.
Indicatorlight
If thelightblinking, indicatethephonehasmissedcall
Memorykey
(1-6)
Userscouldstoretheircommonlyusednumberinthesekeys,
and call forthemasspeeddial.
Softkey1/2/3
Keyscombination,includefunctionssuchasSMS/SDial
/Memo/Answer/Conf/enter/save/quit /edit/redial/andso
on.
-7 -
1.4. Portforconnecting
Port Portname description
Powerswitch Input: 5VAC, 1A
WAN 10/100MConnectit toNetwork
LAN 10/100MConnectit toPC
Handset Porttype:RJ-9 connector
HeadsetPorttype:RJ-9 connector
Headset Porttype:3.5mmjack
RS530 providetwoEthernetportsandapoweradaptor.AlsohastwoheadsetinterfaceswithRJ-9
portand 3.5mm jack.Pleaserefertosafetynotesofthismanualcarefullybeforepoweradaptoris
connected.
-8 -
2. Initialconnectingand Setting
2.1. Connectthephone
2.1.1. Connecttonetwork
Step1:ConnecttheIPPhonetothecorporateIPtelephony network.Beforeyouconnectthe
phonetothenetwork, pleasecheckifyournetworkcanworknormally.
You candothisinoneoftwoways, dependingonhowyourworkspace issetup.
Directnetworkconnection—bythismethod,youneedatleastoneavailableEthernetportinyour
workspace.UsetheEthernetcableinthepackagetoconnectWANporton thebackofyourphone
totheEthernetportinyourworkspace. Since thisVoIPPhonehasrouterfunctionality,whether
youhaveabroadbandrouterornot, youcanmakedirectnetworkconnect.Thefollowingtwo
figuresareforyourreference.
Sharednetworkconnection—UsethismethodifyouhaveasingleEthernetportinyour
workspace withyourdesktopcomputeralreadyconnected toit. First, disconnecttheEthernet
cablefromthecomputerandattachit totheWANporton thebackofyourphone. Next,usethe
EthernetcableinthepackagetoconnectLANportonthebackofyourphonetoyourdesktop
computer. YourIPPhonenowsharesanetworkconnectionwithyourcomputer. Thefollowing
figureisforyourreference.
Step2:Connectthehandsettothehandsetportbythehandsetcableinthepackage.
Step3:connectthepowersupplyplugtotheAC5Vadapterportonthebackofthephone.Use
thepowercabletoconnectthepowersupplytoastandardpoweroutletinyourworkspace.
-9 -
Step4:pushtheon/off switchonthebackofthephonetotheonside, thenthephone’sLCD
screendisplays Initializingwait logon”. Later, aready screentypicallydisplaysthedate, time.
If yourLCDscreendisplaysdifferentinformationfromtheabove,youneedrefertothenext
section Initialsetting”tosetyournetworkonlinemode.
If yourVoIPphoneregistersintocorporateIPtelephonyServer, yourphoneisreadytouse.
2.1.2. Poweradaptorconnection
Makesurethatthepoweryouuseiscomplywiththeparametersofpoweradaptor.
1. Plugpoweradaptortopowersocket.
2. Plugpoweradaptor’sACoutputtotheAC5VportofRS530 tostartup.
3. Therewill bedisplayedblacklineand initializing... wait logon...”onthescreen. After
finishingstartup, phonewill showgreeting, currentdateandtimeandsoforth.
4. If phonehasregisteredtotheserver, youcanplace oranswercalls.
2.2. BasicInitialization
RS530 isprovidedwithaplentyoffunctionsandparametersforconfiguration. Userneedssome
networkand VoIPknowledgesothatusercouldunderstandthemeaningsofparameters. Inorder
tomakeuserusethephonemoreeasilyandconvenient, therearebasicconfigurationsintroduced
whichismandatorytoensurephonecalls.
2.2.1. Networksettings
Makesurethatnetworkisconnectedalready beforesettingnetworkofphone.RS530 usesDHCP
togetWANIPconfigurations, sophonecouldaccess tonetworkaslongasthereisDHCPserver
init.If thereisno DHCPserveravailable, phonehastobechangedWANnetworksettingto
StaticIPorPPPoE.
Note: duringsettingnetworkparameterinmenu, Pleasedon’tpress the key,orelse
thephonewill notsavetheconfigurationandwill returntostandbyinterface.
Setting PPPoEmode(forADSLconnection)
1. GetPPPoEaccountand passwordfirst.
2. Press , and press twice, screenwill show Network”. Thenpress Soft2 (Enter)
or"OK", theLCDscreenwilldisplay WAN”.
3. Press Soft2 (Enter), thenpress , choose PPPoE.
4. Press Soft1 (Edit), thescreenwill display Account”. Thescreenwill showthecurrentaccount
information. Press Soft1 (Del)todeleteit, theninputyourPPPoEaccountandpress Soft2 (Save).
With saved”displayed, screenwill jump to password settings,
-10 -
5. Press Soft2 (Edit)again, theninputyourPPPoEpasswordandpress Soft2 (OK), With Saved”
displayed, screenwill displaythecurrent password:******, and confirm: youneedinputthe
passwordagain, afterconfirm,press soft2 (OK)tosavetheAccountandpassword.
6. Press Soft3 (Quit)once returnto NetMode”. Press Soft2 (Save)thescreenwill show Saved”
and thenjump toshowthecurrentnetmode.
7. Press orSoft3 (Quit)thrice returntostandby, atthistimethephoneistryingto
changetoPPPoEmode.Press forcheckingthestatus.Ifthescreenshows
Negotiating…”it showsthatthephoneistryingtoaccesstothePPPoEServer;ifit showsanIP
address, thenthephonehasalready getIPwithPPPoE.
Setting StaticIPmode(staticADSL/Cable, orno PPPoE/DHCPnetwork)
1. Preparethenetwork’sparametersfirst, suchasIPAddress, Netmask, Default Gatewayand
DNSserverIPaddress.If youdon’tknowthisinformation,pleasecontacttheservice provider
ortechnicianofnetwork.
2. Press , thenpress twice, chooses Network”. Press "OK" orSoft2 (Enter),
LCDscreenwill display WAN”.
3. Press "OK" orSoft2 (Enter), thenchoose Static”.
4. Press Soft1Edit)and screenwill show IP”, thenpress Soft1 (Del)todelete.InputyourIP
address andpress Soft2 (Save)tosavewhatyouinput. After Saved”shown, thescreenwill
jump toshowthe Netmask information.
5. Press Soft1 (Del)todelete. InputyourNetmaskand press Soft2 (Save). After Saved”shown,
thescreenwill jump toshowtheGatewayinformation
6. Press Soft1 (Del)todelete,Inputyourgatewayandpress Soft2 (Save). After Saved”shown,
thescreenwill jump toshowtheDNSinformation.
7. Press Soft1 (Del)todelete. InputyourDNSserveraddress andpress Soft2 (Save). After
Saved”shown, thescreenwill returntoshowIPinformation.
8. Press Soft3 (Quit)once, thescreenshows”NetMode”.thecursorstayat <>Static”;with
Soft2(Save)pressed，thescreenshows Saved”and then showsthecurrentnetmode.
9. Press orSoft3 (Quit)thrice, returntomaininterface andatthistimethe
phoneistrying tochangetoStaticmode. Press button, thescreenshows
Static”.thescreenshowstheIPaddress and gatewaywhichweresetjustnow, ifthephone
coulddisplaytherighttime, it showsthatStaticIPmodetakeseffect.
SettingDHCPmode
1. Press , thenpress twice,chooses Network”. Thenpress "OK" orSoft2 (Enter),
thescreenwill show WAN”.
-11-
2. Press "OK" orSoft2 (Enter) toshow NetMode”. Select DHCP”. Press Soft2 (Save), with
saved”shown, screenwill jump toshowthecurrentnetmode.
3. Press orSoft3 (Quit)thriceback tomaininterface andatthistimephoneis
tryingtochangetoDHCPmode. Press until thephoneshows DHCP”，If the
screenshowstheIPaddress and gatewaywhichweresetjustnow, it showsthatDHCPmode
takeseffect.
-12 -
3. RS530 s basicoperation
3.1. Answer calls
RS530 will ringtoindicateyou whenthereiscall incoming，belowiswaystoanswercall：
lAnswerwithhookoff
Takehandset,you cantalkdirectly. You canjusthanguptofinishtalk。
lAnswerwithhands-free
Press tobegintalking. Press againtofinishtalk
lAnswerwithheadset
Press toanswerthecall, ifthephonedetectheadsetLEDwill turntogreen, whenyoupress
againthephonechangetospeakermode. You maypress orSoft3 (Close)to
finishthecall.
lUsinghands-free insteadofhandsetduringatalk
Press and hookonthehandsetwhenyouusehandsettospeakandwanttochangetouse
hands-freetospeak. Press againtofinishtalk.
lUsinghandsetinsteadofhands-free duringatalk
Hookoff thehandsetwhenyouwanttousehands-free tospeakandwanttochangetousehandset.
Justhook ontofinishtalk.
3.2. Placecalls
lUsinghandset
Hookoff (screenwill showthecurrentusingline,oryoucouldpress keyL1-L3 toselect), after
getting dialingtone,youcouldbegintodialnumber. Afterfinishingit,press # andRS530 will
sendthenumberand call thenumber. Whenyouheararing-backtoneandscreenshowsthe
callee’snumber, it showsthatthepersonyoucalledisringing. Ifcalleeanswersthecall,you can
begintotalkandyourphonewill keepshowing callee’snumberandcountingtime. Justhang up
tofinishtalk.
lUsinghands-free
Press （screenwill showthecurrentusingline, oryoucouldpress keyL1-L3 toselect), after
-13 -
getting dialingtone,youcouldbegintodialnumber. Afterfinishingit,press # andRS530 will
sendthenumberand call thenumber. Whenyouheararingbacktoneandscreenshowsthe
callee’snumber, it showsthatthepersonyoucalledisringing. Ifcalleeanswersthecall,you can
begintotalkandyourphonewill keepshowing callee’snumberandcountingtime.Press
againtofinishtalk.
lUsingdirectory
Press instand-bymode,youwill access tophonebook.Iftherearemany personsrecords
storedinthedirectory,youcanuse & toselectnumberorpress thefirstcharacter
ofthenameforsearchingthepersonwhichyouwanttocontact. Press toforward，and
press tobackward. Press Soft2 (Dial)todialthecurrentnumbershownon thescreen.
lSpeeddial
Speeddialmeansusercanmakecallsdirectlywithouthookofforusinghands-free.Usercandial
numberinstand-bymode, butfirst, userneedtoaddandedit SDialno. BypressingSoft2 (SDial)
toeditandsavethenumbertobeaSDialnumber. Inthisway,usercouldmakeacall onlypress
thenumberandSoft3 (Dial).
lMulti-linecalls
RS530 supports3 SIPlines, thatisusercoulduse3 SIPaccountstoregisterandmakecalls.
Systemwill useSIP1 asdefault linetocall.
Therearemosttwocallsatthesametime.Screenwill displaytheincomingcall numberwhen
useriskeeptalking. Youcanpress Soft1 (Answer) toacceptit, andholdthefirstone(ifyouwant
tousethisfunction,youneedenableCall Waitingofthephonefirst). UseSoft1 (Switch)toswitch
thetwocallstotalk.
3.3. Endcalls
lHangup withhandsethookon
Hookontofinishtalking.
lHangup withhands-free
Press tofinishtalkwhenphoneisinhands-free status.
Note:usercannotfinishtalkbypressing ifphoneisusedhandsettotalk.
lHangup aactivecallwith2calls
Whentherearetwocalls，usermightuseSoft1(Switch)toswitchtothecall youwanttohangup
first. Thenpress Soft3 (Close)tofinishtalk, andphonewill switchtotheothercall automatically.
Note：it isnousetopress Soft3(Close)tofinishtalk,ifthereisonlyonecurrentcall.
-14 -
3.4. Call transfer
lBlind Transfer
Duringtalk,press orSoft2 (Transf), andthendialthenumberthatyouwanttotransfer
to, andfinishedby"#". Phonewill transferthecurrentcalltothethirdparty. Afterfinishing
transfer, thecall youtalktowill behangedup.UsercannotselectSIPlinewhenphonetransfers
call.
lAttendedTransfer
Duringtalk,press orSoft2 (Transf), theninputthenumberthatyouwanttotransferto
and press Soft2 (Send). Afterthatthirdpartyanswers, thenpress tocompletethetransfer.
(You needenablecall waiting andcall transferfirst).If therearetwocalls,youcanjusttalktoone,
and keepholdtotheotherone. Theonewhoiskeepholdcannotspeaktoyouorhearfromyou.
Inotherway, ifuserwantstoinvitethethirdpartyduringthecall, theycanpress Soft1 (Conf)to
makecallsmodeinconferencemode.Ifuserwantsto stopconference,usercan pressSoft1 (Split).
(Usermustenablecall waiting andthree waycall first).
Note:theserverthatuserusesmustsupportRFC3515 oritmightnotbeused
lAlertTransfer
Duringthetalk,press orSoft2 (Transf)firstly, thenpressSoft2 (Send)afterinputtingthe
numberthatyouwanttotransfer. You arewaitingforconnection, now,press orSoft2
(Transf)and thetransferwill bedone. (Tousethisfeature, you needenablecall waitingand call
transferfirst)
3.5. Call hold
Duringtalking,usercouldpress toholdthecurrentcall.Press againtoreturn
thecall orswitchthecall active.
3.6. 3-way conference call
Usercanpress Soft1 (Conf)todialtheline2 (press Soft1 (Answer) toanswerthecall directlyif
thiscall isfromline2)during talkingwithline1. Afterline2 connect,usercanpress Soft2 (Conf)
toenterintoconference mode.Tobacktoline1 fromconference,pleasepress Soft1 (Split);toend
thecall, pleasepressSoft3 (Close)orpress .
3.7. SwitchboardOperatorfeature
-15 -
Usercanpress Soft1(Conf)todialtheline2(press Soft1(Answer) toanswerthecall directlyif
thiscall isfromline2)during talking with line1. Afterline2 connect,usercanpress Soft1(Switch)
toselectwhichlineyouprefertotransfer,thenpress toinputthenumberyouwantto
transferandpress againtodothetransfer.
3.8. Call records
RS530 supports100 itemsofmissedcall,100 itemsofincomingcall,and 100 itemsofdialedcall.
If therecordsarefull,thenewestwillreplace theoldest.If phone’spowercutorreboot,call
recordswill bediscarded.
lMissedcall
Press ,and screendisplays MissedCall”withthenumberand timeofmissedcall.User
canalsouse & tobrowsethemissedcall records,orpress Soft1(Option)to
checkthedetailsofthisrecord,thenpress Soft2(EDial)againtochangethecurrentnumber.
PressingSoft2(Dial)will call thisnumberdirectlyifuserdon’tmodifythenumber.Ifthereisno
missedcall, screenwill show ListIsEmpty”.
lIncoming call
Press and screendisplays Incoming Call”,bypressing & tobrowsethe
records;orpress Soft1(Option)tocheckthedetailsofthisrecord,thenpress Soft2(EDial)again
tochangethecurrentnumber.PressingSoft2(Dial)will call thisnumberdirectlyifuserdon’t
modifythenumber. If thereisno incomingcall，screenwill show ListIsEmpty”.
lDialedcall
Press ,anduse & tobrowsethedialedcall records;orpress Soft1(Option)
tocheckthedetailsofthisrecord,thenpress Soft2(EDial)againtochangethecurrentnumber.
PressingSoft2(Dial)will call thisnumberdirectlyifuserdon’tmodifythenumber.Ifthereisno
dialedcall, screenwillshow ListIsEmpty”.
-16 -
4. Webconfiguration
4.1. Introductionofconfiguration
4.1.1. Waystoconfigure
RS530 hasthreedifferentwaystodifferentusers.
lUsephonekeypad.
lUseweb browser（recommendatoryway）.
lUsetelnetwithCLIcommand.
4.1.2. PasswordConfiguration
Therearetwolevelstoaccess tophone:rootleveland generallevel.Userwithrootlevelcan
browseandsetall configuration parameters,whileuserwithgenerallevelcansetall configuration
parametersexceptSIP(1-2)orIAX2’sthatsomeparameterscannotbechanged,suchasserver
address andport. Userwill hasdifferentaccess levelwithdifferentusernameandpassword.
lDefault userwithgenerallevel：
uusername：guest
upassword：guest
lDefault userwithrootlevel：
uusername：admin
upassword：admin
Thedefault passwordofphonescreenmenuis123.
4.2. Settingviawebbrowser
Whenthisphoneand PCareconnectedtonetwork,entertheIPaddress ofthewanportinthis
phoneastheURL(e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).
If youdonotknowtheIPaddress,youcanlook it upon thephone’sdisplaybypressing
button.
Theloginpageisasbelowpicture
※: Afteryou configuretheipphone,youneedclicksavebuttoninconfigunderMaintenance in
theleftcatalogtosaveyourconfiguration. Otherwisethephonewill loseyourmodification
afterpoweroff and on.
-17 -
4.3. ConfigurationviaWEB
4.3.1.BASIC
4.3.1.1.Status
Status
Fieldname Explanation
Network
Showstheconfigurationinformationon WANandLANport,
includingtheconnectmodeofWANport(Static, DHCP, PPPoE),
MACaddress, theIPaddress ofWANportandLANport, ON or
OFF ofDHCPmodeofLANport.
PhoneNumber ShowsthephonenumbersprovidedbytheSIPLINE1-3servers
and IAX2.
Thelastlineshowstheversionnumberand issueddate.
4.3.1.2.Wizard
Wizard
FieldName Explanation
-18 -
Pleaseselectthepropernetworkmodeaccordingtothenetworkcondition. RS530 provide
three differentnetworksettings:
lStatic:IfyourISP serverprovidesyouthestaticIPaddress, pleaseselectthismode, then
finishStaticModesetting. Ifyoudon’tknowaboutparametersofStaticModesetting,
pleaseaskyourISPforthem.
lDHCP:Inthismode,youwill gettheinformationfromtheDHCPserverautomatically;
neednottoinputthisinformationartificially.
lPPPoE:Inthismode,yourmustinputyourADSLaccountand password.
You canalsoreferto3.2.1 Networksettingtospeedsettingyournetwork.
ChooseStaticIPMODE，click NEXT】canconfigthenetworkand SIP(defaultSIP1)simply,
alsocanbrowsetoo. Click BACK】canreturntothelastpage.
StaticIPAddress InputtheIPaddress distributedtoyou.
Netmask InputtheNetmaskdistributedtoyou.
Gateway InputtheGatewayaddress distributedtoyou.
DNSDomain SetDNSdomainpostfix. Whenthedomainwhichyouinputcan
notbeparsed,phonewill automaticallyaddthisdomaintotheend
ofthedomainwhichyouinputbeforeandparseit again.
PrimaryDNS InputyourprimaryDNSserveraddress.
AlterDNS InputyourstandbyDNSserveraddress.
DisplayName Setthedisplayname.
ServerAddress InputyourSIPserveraddress.
ServerPort SetyourSIPserverport.
UserName InputyourSIPregisteraccountname.
Password InputyourSIPregisterpassword.
PhoneNumber InputthephonenumberassignedbyyourVOIPserviceprovider.
EnableRegister Starttoregisterornotbyselectingit ornot.
-19 -
Displaydetailedinformationthatyoumanualconfig.
ChooseDHCPMODE，click NEXT】canconfigSIP(default SIP1)simply, alsocanbrowsetoo.
Click BACK】canreturntothelastpage. LikeStaticIPMODE。
ChoosePPPoEMODE，click NEXT】canconfigthePPPoEaccount/passwordandSIP(default
SIP1)simply, alsocanbrowsetoo. Click BACK】canreturntothelastpage.LikeStaticIP
MODE。
PPPoEServer Itwill beprovidedbyISP.
Username InputyourADSLaccount.
Password InputyourADSLpassword.
Notice:Click Finish】buttonafterfinishedyoursetting,IPPhonewill savethesetting
automaticallyandreboot,Afterreboot,youcandialbytheSIPaccount.
4.3.1.3.Call Log
Youcanqueryalltheoutgoingthroughthispage.
Call Log
Fieldname explanation
StartTime Displaythestarttimeoftheoutgoingrecord.
LastTime Displaytheconversationtimeoftheoutgoingrecord.
CalledNumber Displaytheaccount/protocol/lineoftheoutgoingrecord.
4.3.1.4.MMISET
-20 -
MMISET
Fieldname explanation
LanguageSet Setthelanguageofphone, Englishisdefault.
GreetingMessage
Thegreetingmessagewill displayonlcdwhenphoneisidle. Itcan
support16 chars. thedefault charsareVOIPPHONE.
4.3.2. Network
4.3.2.1.WAN Config
WANConfig
FieldName explanation
Table of contents
