Aastra Clearspan 6731i Manual

Aastra 6731i
Admin Guide
Schmooze Com Inc.

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
© Copyright Schmooze Com, 2012
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
© Copyright Schmooze Com, 2012
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
© Copyright Schmooze Com, 2012
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
© Copyright Schmooze Com, 2012
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.
© Copyright Schmooze Com, 2012

Chapters
Reset to Factory Defaults
How to Find the IP Address and MAC Address
How to Set the TFTP Boot Server
Reset to Factory Defaults
Quick Steps
1. Select the Options button.
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select option 4, Factory Default.
5. Press # to confirm the Factory Default.
How to Find the IP Address and MAC Address
Quick Steps
1. Select the Options button
2. Next select Phone Status, Option 2.
3. You will now select Option 1, IP&MAC Address.
4. You will now be shown the current IP Address of the phone.
5. Press the Down arrow once, You will now be shown the MAC address of the phone.
How to Set the TFTP Boot Server
Quick Steps
1. Select the Options button
2. Select the Admin Menu Option.
3. Enter the Admin Password. (Note: The default password is 22222).
4. Select Config. Server.
5. Select Option 2, TFTP Settings.
6. Select Primary Server.
7. Enter the Internal Or External IP address of your PBX. (Note: What IP you use will
depend on if the phone will be used inside of your network or from a remote location).
8. Reboot the phone.
© Copyright Schmooze Com, 2012

Schmooze Com Inc.
http://schmoozecom.com
[phone]