Realalt 3D TriFit User manual

USER’S MANUAL
3DTriFit
3D Pedometer
By Realalt
PLEASE NOTE
This pedometer has a
PAUSE FEATURE.
If your pedometer is
not recording steps,
then your Pause
feature may be
activated. See Page 6
to learn how to simply
control the Pause
Feature.
Flashing ‘ ’ icon
= Active Pedometer.
BEFORE YOU
START
Press the RESET button
on the back of the
pedometer using the
included pin to
prepare your
pedometer for setup.

1
LCD Display
MODE
Button
SET
Button
RESET
Button
System
Reset
Button
Battery Cover
Clip
FEATURES
LAYOUT

2
Alternatively, use an average stride length:
Men: 30”/76cm
Women: 26”/66cm
Need Setup Help? Watch the Setup Video at:
www.realalt.com/setup
BEFORE YOU START SETUP

3
The RESET Button will cycle up/change values.
To get to a lower value, keep cycling up the values
until it restarts from a lower value.
The MODE Button will conrm your selection and
advance to the next setup step.
The SET Button will exit Setup.
MODE
Button
SET
Button
RESET
Button
BEFORE YOU START SETUP
BUTTONS USED DURING SETUP

4
SETUP STEPS

5
Need Help on How to Operate your Pedometer?
Watch the How to Operate Video at: www.realalt.com/setup
OPERATING MODES AND ICONS

6
15 STEP ERROR PREVENTION FEATURE
AUTOMATIC MIDNIGHT RESET
PAUSE FEATURE
CHANGING UNITS OF MEASUREMENT

7
RESETTING YOUR 3D PEDOMETER
STANDBY MODE
LOW BATTERY INDICATOR
BATTERY REPLACEMENT

8
FAQ

9
Watch the Setup and How to Operate videos
plus more: www.realalt.com/setup