Rean RCAC3F-X-000 User manual

|
R
B
D
A
R
Page 1
A
.
Insert cable into the bushing and housing.
Note:“Apply cable pulling
lubricant to cable jacket.”
BSeperate the housing from the bushing
(cable remain in bushing)
CPlace chuck over the cable.
C
DPrepare cable as shown.
VDE (EN 60320-1/EN60320-2-2) UL (UL 60320-1/CSA C22.2 NO.60320-1)
20mm
40-50mm
[0.787"]
P 23 mmE [0.9"]
8 mm
[0.32"]
20mm [0.787"]
P 23 mmE [0.9"]
8 mm
[0.32"]
RCAC3F-X-000
ASSEMBLY INSTRUCTION
A.
Power Cable Connector
ASSEMBLY INSTRUCTION

G
VDE ULWiring
blackL brown
whiteN blue
green/yellow green
E
F
Draft. Nr.: NCN 027 Update: 2022-04-26
I
www.rean-connectors.com
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Data subject to change without prior notice. 2021 REAN . is registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
® ®
© REAN
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Page 2
R
R
ASSEMBLY INSTRUCTION
|
Torque Value 0.7 Nm
Slide the cable into the contacts and clamp
with the screw with Torx size T8.
Torx size T8
E
3.
1.
2.
Important
Push and turn simultaneously.
Slide chuck onto insert (1) and then both into
housing (2).
Important:Align the chuck by positioning the nose
into keyway.
F
4.
Torque Value 2.0NM
5.
Important: Black O-ring to hide to achieve IP
protection (6)
Slide the cable clamp (3) bushing up the cable and
tighten it.
G
Press with screw driver to unlock
FOR DISASSEMBLY - OPEN TWIST LOCK!
Turn bushing 360
Repat step + until bushing is unscrewed.
1.
2.
3. 1. 2.
1.
2.
category,do not expose the
connection to bending forces
(e.g. do not attach loads to
the cable,no free-dangling
cable windings etc.).
CAUTION
To ensure protection
FORCE
XLR Cable Connectors:
Find more details on
www.rean-connectors.com
Power Cable Connector

Draft. Nr.: NCN 027 Update: 20212-04-26
I
www.rean-connectors.com
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
Data subject to change without prior notice. 2021 REAN . is registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
® ®
© REAN
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
Page 3
R
R
ASSEMBLY INSTRUCTION
|
RRAC3M-X-000 RRAC3F-X-000
RCAC3M-X-000
(Plug connector)
B.
RCAC3F-X-000
The power con system is certified as a connector with breaking capacity according to IEC60320,VDE
0625.It is intended for use as an appliance coupler and interconnect coupler.
Application:
To be installed by qualified person only.
It serves to supply power to an appliance and from an appliance to other equipment.
CONNECTOR ASSIGNMENT
Power IN
(Connector)
APPLIANCE INLET APPLIANCE OUTLET
Power OUT
Power Cable Connector
2
Approval based:
Rating:
Cable Type:
IEC 60320-1/EN 60320-1
VDE
250V ac/16A
HV05V-F3G 1.0mm ,Length max. 2m
HV05V-F3G 1.5mm-2.5mm
2
Strain Relief:
Cable O.D.: 6.0 - 12.0 mm
White chuck
UL
UL 60320-1/CSA C22.2 NO.60320-1
250V ac/20A
SJTOW,SJOOW 3X12 AWG
White chuck
6.0 - 12.0 mm
UL50E environmental rating
Enclosure Type when mated with attachment plug RRAC3M-X-000 with Sealing Cover RA-X-001 and
RRAC3F-X-000 with sealing cover RA-X-003.
H07RN-F3G 1.5mm2
B. ASSEMBLY INSTRUCTION