Reasnow Cross Hair User manual

User Manual of Cross Hair
http//www.reasnow.com PAGE 1 / 21
Cross Hair User Manual
V2.8
Feb, 2015
This manual is the intellectual property of eaSnow. It must only be published in its
original form. Using parts or republishing altered parts of this document is prohibited
without permission from eaSnow.

User Manual of Cross Hair
http//www.reasnow.com PAGE 2 / 21
Table of Contents
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Chapter 1：
：：
：Introdu tion: What is the Cross Hair
1.1 Advantages
1.2 Te hni al Spe ifi ations
1.3 To know Cross Hair
1.4 Conne tions
Chapter 2：
：：
：Setting up the Cross Hair
2.1 Simple set up steps
2.2 Basi Settings
2.3 Global Settings
2.4 Setting up in-game
Chapter 3：
：：
：Playing Games
3.1 Things to do before playing
3.2 Ways to Use Cross Hair
Chapter 4：
：：
：Upgrade and Restoration

User Manual of Cross Hair
http//www.reasnow.com PAGE 3 / 21
Chapter 1：
：：
：Introdu tion: What is the Cross Hair
Cross Hair aims to provide the best mouse and keyboard control solution for all game
consoles (such as PS4, PS3, XBOX ONE,XBOX 360 etc), and the freedom to choose
between the keyboard, mouse, joystick, and other controllers.
For beginners, Cross Hair can give you a smooth and easy experience while playing
games using your own keyboard and mouse. On the contrary ， a controller for aiming in
FPS(First-Person Shooting) games can be troublesome.
For advanced users, it lets you enjoy the game as you wish, with whatever hardware you

User Manual of Cross Hair
http//www.reasnow.com PAGE 4 / 21
like: the gaming-grade keyboard and mouse or joystick or preferred controller.
Cross Hair has 4 working modes, which you should know.
●PLAY MODE: When connecting to game console, controller, keyboard and mouse are
ready, its LOGO will be a breathing color, and then you can play your game.
●PC MODE: When connecting to PC and no USB device plugged into it, its LOGO will be
white, then it can be configured on PC by using Cross Hair Manager. Meanwhile you can
upgrade firmware and restore factory configuration in this mode.
●CONFIG MODE: Any time while playing a game (in PLAY MODE), just press
SHA E+OPTIONS (PS4 platform) keys on your controller to enter this mode and the
LOGO’s light will be turned off in this mode. Then you can change settings and get instant
feed back.
●REPAIR MODE: Hold down the button, then plugging Cross Hair into your PC, when the
LOGO is green, you can then release the button, and a stable green light means REPAIR
MODE. In this mode, Cross Hair’s firmware and configurations can be repaired.
MODE Sound on start
Color Fun tion Atta hed Devi e
PLAY MODE 1 beep Breathing color Play games Controller, KB, MS
PC MODE 2 beeps White Configure and upgrade NO
CONFIG MODE 3 beeps Black Configure in game Controller, KB, MS
REPAIR MODE 4 beeps Green epair firmware NO
Please refer to hapter 2.4 and 5.7 for CONFIG MODE and REPAIR MODE details.
Color and Sound ：
：：
：
Mode COLOR BEEP Fun tion
PLAY MODE Breathing color
As configured
CONFIG MODE Black
flash red Higher pitch beep HIP ADD
flash red Lower pitch beep HIP SUB
flash green Higher pitch beep ADS ADD
flash green Lower pitch beep ADS SUB
flash blue Normal beep Key mapping
1.1 Advantages
● Support all platforms: PS4/PS3/ XBOX ONE/XBOX 360
● Mice, Keyboards, Joysticks compatibility
● Cross platform controller usage (All controllers on any console)
● Intelligent Engine (best mouse precision, 1:1 movement in game)
● Xbox headsets supported
● Firmware in field upgrade
● Active community online
● Seamless aluminum enclosure
● Color and sound indication (clear and convenient)

User Manual of Cross Hair
http//www.reasnow.com PAGE 5 / 21
1.2 Te hni al Spe ifi ations
Outline 75*75*22mm
Net Weight 105g
Platforms PS4/PS3/XBOX ONE/XBOX 360
Configuration 16 configurations, user defined
Color Black
PO T 3 USB ports For controller, keyboard and mouse
1 MINI USB device port Connecting to game console
BUTTON Firmware repair
BEEPE Internal beeper Sound indication
Temperature -10~50
℃ (14~122 ℉ )
Humidity Below 90%
1.3 To know Cross Hair
MINU USB: Connect to game console.
USB1: Connect to the genuine official wired controller shipped with game console. As for
wireless controller, just connect it with suitable USB cable to this USB port. The exception
is that Xbox 360 requires a genuine wired Xbox 360 controller.
USB2: Connect to your keyboard, joystick or other controller.
USB2: Connect to your mouse.
BUTTON: Firmware reparation.
LOGO LED: Status indication.
Internal Beeper: Status indication. You do not need to look at Cross Hair and will be
informed of meaning based on the sound.

User Manual of Cross Hair
http//www.reasnow.com PAGE 6 / 21
1.4 Conne tions (PLAY MODE)
● Please onne t your ontroller, keyboard, joysti k or mouse a ording to the
figure above. Do not hange the order of USB 1~3 at will.
USB PORT DEVICE TO BE CONNECTED
USB 1 Official wired controller
USB 2 Keyboard or joystick or other controller
USB 3 Mouse
Please refer to Chapter 3.2 for more connection options.
Chapter 2：
：：
：Setting Up Cross Hair
2.1 Simple set up steps
2.1.1 Step 1: Conne t to PC (PC MODE)

User Manual of Cross Hair
http//www.reasnow.com PAGE 7 / 21
● Please connect your Cross Hair according to the figure above, using the USB cable
included in the package. Make sure that there is no ontroller, keyboard, mouse,
joysti k or anything else plugged into it. And when Cross Hair LOGO is white, it enters
into PC MODE, and can then be configured on PC.
2.1.2 Step 2: Run Cross Hair Manager (Windows OS only)
un Cross Hair Manager which can be downloaded from http://www.reasnow.com
Please choose the latest version.
2.1.3 Step 3: Choosing onsole and game
● Choose the game console you are going to use by clicking on the right-arrow button

User Manual of Cross Hair
http//www.reasnow.com PAGE 8 / 21
● If there is already a configuration of the game you want to play, choose the configuration
and click on the “Edit” button, this is the fastest way.
● If there is no existing suitable configuration, just click on the “New” button to add a new
configuration. Make any changes as you see fit.
● If the game you want to play do not exist, just choose the “custom game”. This setting
has the highest possibility of working, as most games are not varied very much from each
other.
● Remember to mark the onfiguration most frequently used as “Start Up”. Cli k
the onfiguration first then li k on the “Start Up” button. Then this configuration will
be activated automatically every time when Cross Hair is powered on.
2.1.4 Step 4: Edit Configuration
For convenience, you can use the default settings, but should remember the keys’
mapping, while advanced users can choose their favorite settings. For details of every
setting, please refer to hapter 2.2
2.1.5 Step 5: Save and Exit
You should save the configuration first, before exiting Manager, and after that, unplug the
Cross Hair from PC.
Changes you made will not be saved in you Cross Hair until you have li ked on the
“Save” button. Do not shake the USB able, unplug it, or turn off your PC during the
saving. These behaviors will damage your Cross Hair.

User Manual of Cross Hair
http//www.reasnow.com PAGE 9 / 21
This is the final step before you an enjoy gaming. But if you want to know Cross
Hair better, the following hapters are also very important.
2.2 Basi Settings
2.2.1 Choose platform
By clicking on the right-arrow button, you can choose from PS4/PS3/XBOX ONE/XBOX
360.
2.2.2 Save onfiguration
Any change made to an existing configuration or made by adding a new one has to be
saved in Cross Hair by this button.
2.2.3 Edit an existing onfiguration
If you want to change existing configurations, you can use “Edit” button for this purpose.
2.2.4 Add a new onfiguration
If a new configuration is your choice, just click on the “New” button, and you can then
make detailed changes.
2.2.5 Copy a onfiguration
If you would like to add a configuration that is similar to an existing one, you can copy a
configuration and make necessary changes.
2.2.6 Delete a onfiguration
If you want to delete a configuration, click it first and then click on the “Delete” button.
2.2.7 Set a ertain onfiguration as Start Up.
Select one configuration first and click on the “Start Up” button. Then this configuration will
be activated automatically every time when Cross Hair is powered on.
2.2.8 Key mapping

User Manual of Cross Hair
http//www.reasnow.com PAGE 10 / 21
Click the mapped key icon, and you will enter into a mapping dialog as shown below.
Firstly, choose the hardware from the options of mouse, keyboard, joystick and NONE.
Secondly, use Auto Detect or Drop-down menu , to
select the key you want to use, and to substitute a certain key on controller.
Thirdly, click OK to end this mapping.
2.2.9 Change the name you want to use
in this field.
2.2.10 Cli king the olor will hange the olor of LOGO.

User Manual of Cross Hair
http//www.reasnow.com PAGE 11 / 21
This color can indicate which configuration you are using.
2.2.11 Choose the hotkey for this onfiguration for
fast a tivation.
Once the hotkey is invoked in PLAY MODE, this configuration will be activated instantly.
2.2.12 Sti k mapping
● Choose keys from keyboard or mouse or joystick to replace left stick and right stick.
● The dead-zone here is used to adjust the original controller, the one plugged into USB
port 1. Leave it as default, if you have no trouble with the sticks on controller. A smaller
value means more sensitive, but that may also cause trouble for controlling.
2.2.13 Joysti k setting
The dead-zone here is used to adjust the third-party controller, the one plugged into USB
port 2 or 3. Leave it as default, if you have no trouble with that controller.
Such as: Logitech G13,Sony Move Navigation Controller,Logitech Attack3, and other
controllers which are used to replace the original one.
2.2.14 Sensitivity
Typically in FPS games, you will have two modes of shooting: HIP and ADS (Aim Down
Sight), so you have to set them separately. If you are not familiar with these values, just
leave them as default.

User Manual of Cross Hair
http//www.reasnow.com PAGE 12 / 21
Please remember to set mouse’s DPI and game’s LOOK sensitivity to maximum first. And
after these two procedures are done, if the mouse is too slow, you need to set HIP and
ADS sensitivity to a bigger value. If the mouse is too fast, you need to set HIP and ADS
sensitivity to a smaller value.
As for YX atio, it’s the ratio of mouse’s Y and X direction movement speed. Do not
change it, unless you understand its meaning.
2.2.15 Primary and se ondary mapping
This right-arrow button is used to switch between primary and secondary mapping.
In this way, you can have two options for one key on the original controller.
As default, the secondary mapping is used for a third-party controller. You can change that
to whatever you like.

User Manual of Cross Hair
http//www.reasnow.com PAGE 13 / 21
2.2.16 More settings
This button will bring you to options that are not frequently used.
2.2.17 Notifi ation settings
Maximum Turn Speed indi ation:
If selected, when turn speed exceeds maximum, the LOGO will flash red twice.
Aim Down Sight indi ation:
If selected, when ADS is activated, the LOGO will flash green twice.
2.2.18 Flip verti al movement
Once enabled, your mouse’s vertical movement will be flipped.
2.2.19 Custom Game options
These 2 options are used only for Custom Game, do not change them in preset games.
Aim Down Sight: ADS function may be invoked by different key on controller, due to

User Manual of Cross Hair
http//www.reasnow.com PAGE 14 / 21
different game and console. If you are using a Custom Game configuration, please select
correct key of ADS.
Deadzone Type: If you are using a Custom Game configuration, please select correct
type of Deadzone according to the game.
2.2.20 Load Behavior
This option will change the behavior of your configuration, after it was activated by hotkey.
There are three choices: Standard, Temporary Hold, and Temporary Toggle.
Standard: The configuration is activated by its hotkey and stays active.
Temporary Hold: The configuration is activated only when its hotkey is pressed and the
previous configuration will be reloaded back when the hotkey is released.
Temporary Toggle: The configuration is activated after its hotkey is invoked and the
previous configuration will be reloaded back when the hotkey is invoked again.
2.3 Global Settings
2.3.1 Previous and next onfiguration
These keys can be alternative ways to activate a configuration instead of the hotkey.
2.4 Setting up in-game (CONFIG MODE)
We provide our users with this function for the most flexible and comfortable setting
experience. Although everything of Cross Hair can be configured on PC using its Manager,
you will like setting it up in-game, for this procedure will give you instant feed back when
changing the settings.
Any time in game, just press SHA E+OPTIONS （ PS4 platform ） keys on your controller to
enter CONFIG MODE and the LOGO’s light will be turned off in this mode.
Different platform has different keys to use.

User Manual of Cross Hair
http//www.reasnow.com PAGE 15 / 21
Game Console Controller Keys to enter/exit CONFIG MODE
PS4 Dual Shock 4 SHA E+OPTIONS
PS3 Dual Shock 3 SELECT+STA T
XBOX ONE VIEW+MENU
XBOX 360 BACK+STA T
In CONFIG MODE, you can use the controller to change HIP and ADS sensitivity as well
as key mapping.
Color and Sound in CONFIG MODE:
KEY COLOR BEEP Fun tions
D-Pad Up flash red Higher pitch beep
HIP ADD
D-Pad Down flash red Lower pitch beep HIP SUB
D-Pad ight flash green Higher pitch beep
ADS ADD
D-Pad Left flash green Lower pitch beep
ADS SUB
flash blue Normal beep Key mapping
After changing settings to you liking, just press the combination keys again, and you will
exit the CONFIG MODE, and return to PLAY MODE.
2.4.1 Adjusting HIP sensitivity (CONFIG MODE)
D-Pad Up key is for increasing HIP sensitivity. You will see a flashing red light and hear a
higher pitch sound once the key is pressed.
D-Pad Down key is for decreasing HIP sensitivity. You will see a flashing red light and hear
a lower pitch sound once the key is pressed.
2.4.2 Adjusting ADS sensitivity (CONFIG MODE)
D-Pad ight key is for increasing ADS sensitivity. You will see a flashing green light and
hear a higher pitch sound once the key is pressed.
D-Pad Left key is for decreasing ADS sensitivity. You will see a flashing green light and
hear a lower pitch sound once the key is pressed.
2.4.3 Mapping keys (CONFIG MODE)

User Manual of Cross Hair
http//www.reasnow.com PAGE 16 / 21
To begin key mapping, you should press the PS key (PS4/PS3) or GUIDE key (XBOX
ONE/360). Then the LOGO will show flashing blue. This means you can choose one key
on the controller to be mapped.
Once the key on the controller is pressed, LOGO will show a stable blue light, and then
wait for the corresponding key on the keyboard, mouse, joystick, etc. After selecting your
key, Cross Hair will keep flashing blue again. Then a new key mapping can be continued.
After mapping all the keys, you can press SHA E+OPTIONS
（ PS4 platform ） keys on your
controller to exit the CONFIG MODE, and end the mapping procedure.
Mapping keys in CONFIG MODE is recommended, as you can get instant response
in-game, and all the keys can be mapped. On the contrary, in PC MODE, some special
keys of your mouse, keyboard or joystick may not be detected due to OS's limitations.
It is espe ially re ommended to use CONFIG MODE for mapping keys of joysti k or
ontroller.
Chapter 3：
：：
：Playing Games
3.1 Things to do before playing
If you have a onfigurable mouse, please follow 3.1.1 – 3.1.4.
If you have a mouse whi h an not be onfigured, just skip 3.1.1 – 3.1.4.
If your mouse is onfigurable but have no on-board memory in it that means your
settings will be lost when the mouse is unplugged from PC, remember to set its DPI
to maximum by using the DPI button on it every time you use the mouse with Cross
Hair.
3.1.1 Mouse DPI/CPI
Make sure the mouse you are using is configured at its highest DPI, or you should connect
it to a PC, and use some software from the producer to change the DPI to maximum.
Remember high DPI an give you better experien e in game.
3.1.2 Mouse Report Rate
Set your mouse USB polling rate to 500 or 1000.

User Manual of Cross Hair
http//www.reasnow.com PAGE 17 / 21
3.1.3 Mouse Button Fun tion
Buttons of some mouse can be configured. If you want to use them to replace buttons
from controller, you should set them as standard keys of keyboard or mouse, do not set
them as combination keys or special function keys. For example, Ctrl + C, Volume
Up/Down, DPI up/down are all unacceptable.
3.1.4 Save to On-Board Memory
Some mice have on-board memory to store DPI and other settings, please remember to
save all these in On-Board Memory.
Other mice have no on-board memory, but their DPI can be adjusted, so you need to set
their DPI to maximum every time powered on.
3.1.5 LOOK Sensitivity
Please set the game’s “LOOK SENSITIVITY” to maximum. It may be called insane,
maximum, 10, 20 or 100.
3.1.6 Battery of ontroller or mouse
Make sure your controller is fully charged and off, and the mouse is also fully charged, if
there is battery in it.
3.1.7 Controller’s layout in game

User Manual of Cross Hair
http//www.reasnow.com PAGE 18 / 21
Your controller’s layout should be set as default, and change of these will confuse Cross
Hair.
3.2 Ways to Use Cross Hair
Conne t all devi es ( ontroller/keyboard/mouse) to Cross Hair first, and then
onne t Cross Hair to game onsole.
1. Use a keyboard and mouse, instead of a ontroller
2. Use a joysti k and mouse, instead of a ontroller

User Manual of Cross Hair
http//www.reasnow.com PAGE 19 / 21
3. Use another ontroller instead of the original one (Cross platform ontroller
usage)
The ontroller onne ted to USB 1 should always be the original one shipped with
the onsole.
Only official controllers are tested and recommended!
Supported Controller:
Game
Console DS4 DS3/ Sixaxis
XBOX ONE
CONTROLLER
XBOX 360
CONTROLLER
PS4 ● ● ●
PS3 ● ● ●
XBOX ONE ● ● ●
XBOX 360 ● ● ●
PS1. Conne t all devi es to Cross Hair first, and then onne t Cross Hair to game
onsole. That is the pro edure we re ommend. Change your onne tion only when
Cross Hair is powered off.
PS2. Make sure to logout the user on your game onsole before onne t Cross Hair
to it. Or onne t all the devi es before game onsole is powered on.
PS3. It’s better to turn off your ontroller on game onsole before onne ting it to
Cross Hair.
PS4. Wireless ontroller of XBOX 360 an not be used as wired ontroller with a
USB able onne ted on it. For the USB port on this ontroller an only be used for
harging, no data lines in this port. While all other wireless ontrollers an be used

User Manual of Cross Hair
http//www.reasnow.com PAGE 20 / 21
as wired ones with a USB able onne ted, su h as ontrollers of PS4, PS3, XBOX
ONE.
Chapter 4：
：：
：Upgrade and Restoration
Please connect your Cross Hair according to the figure below, using the USB cable
included in the package. Make sure there is no ontroller, keyboard, mouse, joysti k
or anything else plugged into it. When the Cross Hair LOGO is white, it enters into PC
MODE, and can then be upgraded and restored on PC.
Click the icon at the bottom right corner of the screen.