Red Arrow Trading LEDFLD30BPC User manual

LED Slimline Floodlight
with Photocell
Installation Instructions P.1
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
T: 0800 195 0006 F: 0870 043 3946
E: [email protected] www.redarrowtrading.com
This installation must be carried out by an electrician.
Please read these instructions carefully before installation.
Leave a copy for the user/maintenance engineer for future reference.
For models: LEDFLD30BPC & LEDFLD50BPC
Important Installation Information
•Installation should be carried out in accordance
with the latest edition of the I.E.E. wiring
regulations (BS7671) and taking into consideration
the latest Building Regulations. If in doubt, consult
a qualified electrician.
IMPORTANT: Ensure that ALL electrical
connections are tight with no loose strands,
including factory made connections.
•Input voltage – 85V-240V
•Ensure there is adequate free air circulation of at
least 100mm around the luminaire. All luminaires
run hot. It is the installer’s responsibility to consider
fire risk and take appropriate precautions.
•Before commencing installation or maintenance,
ensure electricity is switched off at the mains.
•The nearest illuminated surface must be at least
0.5m from the front of the fitting
•It is not recommended for fittings installed outside
to be installed horizontally with the lens facing
upwards. Fittings installed in this manner may fail
prematurely due to water ingress, and such failures
may not be replaced under warranty.
Specification
•Slimline LED Floodlight
• Class I (must be earthed)
• Wattage: 50W
• Lamp (included): LED
• Life Expectancy: 35,000 hours
• Supply voltage: 85-265V
• IP Rating: IP65
• Material: Die Cast Aluminium
Important User Information
•Always switch off mains supply before servicing, fitting
or maintenance.
•Allow the LED and fitting to cool before replacing LED.
Installation Instructions
•Check for concealed cables before drilling fixing holes.
•Remove the bracket pulling out the two bolts on both sides.
• Fix the bracket to a wall or similar hard surface.
•Fix the body to the bracket.
Maintenance
•Before any maintenance ensure the product has cooled
down.
•This product is supplied ready to use. No maintenance
should be required, except if damaged or the front glass
cover is broken. In either case please contact your supplier.
Cleaning
•Depending on the application, clean the glass cover at
regular intervals, and remove all dust or dirt to ensure
luminaire works correctly.
•Use cotton duster (no alcohol, no solvent), only water to
clean glass.
•It is recommended that the fittings be installed with the lens
facing downwards. If the fitting is installed with the lens
facing upwards, the fitting should be tilted a minimum of 30
degrees from the horizontal, to ensure rainwater can quickly
drain away from the lens.
30˚
✓
✗
30˚ ✓
✗

Guarantee
This product is guaranteed for a period of 3 years from the date of purchase. The guarantee is invalid in the case of improper use, tampering, removal of the Q.C. date label, installation
in an improper working environment or installation not according to the current edition of the I.E.E. Wiring Regulations (BS7671). The guarantee is also invalidated if the luminaire has
been Mega tested. Should this product fail during the guarantee period it will be replaced free of charge, subject to correct installation and return of the faulty unit. We do not accept
responsibility for any installation costs associated with the replacement of this product. We reserve the right to alter specifications without prior notice.
Product complies with
all relevant European
standards
Product is suitable for
mounting on flammable
material
F
Notes
•Please note this is an IP65 rated product - do not break any seals as this will affect it’s water resistant rating.
•The fixture can not be modified. Any modification to this fitting will void the warranty.
•The manufacturer / importer shall not be responsible for any product damages caused by mounting procedures which
are not in accordance with instructions.
T: 0800 195 0006 F: 0870 043 3946
E: [email protected] www.redarrowtrading.com
LED Slimline Floodlight
with Photocell
Installation Instructions P.1
For models: LEDFLD30BPC & LEDFLD50BPC
Red Arrow Trading
Elsworth House, Herries Road South
Sheffield, S6 1QS
Photocell
•Do not install in areas of shadow or where the lens will become dirty.
•Do not allow an artificial light source to activate the photocell, as the light may flash ON and OFF.
Test
•To test the fitting, check that the power is on, and cover the Photocell Sensor. The fitting should light when the
Photocell is covered, and switch off when the cover is removed.
PRN WEE/BJ1331XR