Redarc FK100 User manual

100A MEGA Fuse Kit
FK100

100A MEGA FUSE KIT
The FK100 is designed to provide a simple, neat fuse installation for
dual battery systems. The FK100 is perfect for the SmartStart®SBI
(SBI212 and SBI224) auxiliary and start battery connection.
25mm²
spare fuses
19mm
50mm
8mm
50mm²
8mm
KIT CONTENTS
No. Part Quantity
1100 A MEGA Fuse 4
2Fuse Holder 2
3Nut and Spring Washer to suit Fuse Holder 4
4Lug (25 mm² cable input hole, 8 mm stud hole) 4
5Lug (50 mm² cable input hole, 8 mm stud hole) 4
6Heatshrink 4
The Lugs provided are intended for either a 25mm2or 50 mm2cable. If using a smaller cable gauge,
insert with conductor foldback; if using larger cable gauge, source a larger lug.
1
2
4
3
5
6

LIMITED WARRANTY
For full warranty terms and conditions, visit the
Warranty page of the REDARC website.
www.redarcelectronics.com/warranty
Australia, New Zealand & Europe
REDARC Electronics Pty Ltd
23 Brodie Road (North),
Lonsdale SA 5160
Australia
Australia [phone]
New Zealand [phone]
UK & Europe [phone]
North America
REDARC Corporation
c/o Shallco, Inc.
308 Component Dr.
Smitheld, NC 27577
USA
USA [phone]
Canada [phone]
Mexico [phone]
Design and specications are subject to change without notice.
Copyright © 2022 REDARC Electronics Pty Ltd. All rights reserved.
REDARC®, THEPOWEROFREDARC® and SmartStart® are
trademarks of REDARC Electronics Pty Ltd.

FUSE KIT ASSEMBLY
Order of installing Bolt in the Fuse Holder:
1. MEGA Fuse
2. Lug with Heatshrink and cable
3. Spring Washer
4. Nut
Auxiliary
Battery
Start
Battery
100 A Fuse
(and holder) < 150 mm (6")
100 A Fuse
(and holder) < 150 mm (6")
SMARTSTART®SBI (SBI212 & SBI224) INSTALLATION
Auxiliary and Start Battery Connection
LUG AND HEATSHRINK ASSEMBLY
Strip the end of the cable back
enough to ensure the insulation
does not enter the barrel of the
Lug when fully inserted.
Slide the Heatshrink over the cable.
Insert the stripped wires into the
barrel of the Lug.
Crimp the Lug using the correct
crimping tool.
Slide the Heatshrink to partially
cover the Lug, leaving the Lug
tongue exposed.
Shrink the Heatshrink.

WARFK100-3 EN
CONTACT
Tech Support
1300 REDARC
Head Office
[phone]
New Zealand
[phone]
UK & Europe
[phone]
USA
[phone]
Canada
[phone]
Mexico
[phone]
redarcelectronics.com