Redarc KIT24 User manual

Fridge Accessory
Cable
MODEL:
 KIT24
 KIT32

FRIDGE ACCESSORY CABLE
The Fridge Accessory Cable is designed for portable fridges
and REDARCs GoBlock. The curly cord design enables the cord
to be both exible and compact whilst also having the ability to
stretch 2m (6'6") in length when needed.
Maximum Current Rating: 10A
Engel Open end
Dometic Engel
KIT24
Engel Engel
KIT25 KIT33
Dometic Open end
KIT32

LIMITED WARRANTY
For full warranty terms and conditions, visit the
Warranty page of the REDARC website.
www.redarcelectronics.com/warranty
Australia, New Zealand & Europe
REDARC Electronics Pty Ltd
23 Brodie Road (North),
Lonsdale SA 5160
Australia
Australia [phone]
New Zealand [phone]
UK & Europe [phone]
North America
REDARC Corporation
c/o Shallco, Inc.
308 Component Dr.
Smitheld, NC 27577
USA
USA [phone]
Canada [phone]
Mexico [phone]
Design and specications are subject to change without notice.
Copyright © 2023 REDARC Electronics Pty Ltd. All rights reserved.
REDARC®, THEPOWEROFREDARC® and SmartStart® are
trademarks of REDARC Electronics Pty Ltd.

500mm (±20mm)
19.7" (±0.8")
250mm (±15mm)
9.8" (±0.6")
400mm
15.7"
500mm (±20mm)
19.7" (±0.8")
250mm (±15mm)
9.8" (±0.6")
400mm
15.7"
DIMENSIONS
KIT24 KIT32
INSTALLATION
DOMETIC SOCKET INSTALLATION (KIT24)
Locate the Dometic socket on your portable fridge and connect
the terminal head into the socket.
On REDARC’s GoBlock locate the Engel fridge socket and
connect the Engel type plug into the GoBlock.
OPEN END INSTALLATION (KIT 32)
Follow the selected plug manufacturer’s connection
specications. Ensure a rm and sound connection is made
before inserting the plug into a socket.
ENSURING GOOD CONNECTION
Ensure cable is securely mounted at supply and fridge connection
points to ensure good electrical connection.
When routing the cable use an intermediate securing point to
keep the cable away from potential pinch points or being trapped
during use. Ensure the cable extends freely before nishing
installation.
NOTICE: This cable has been heat-treated to form coils.
Extension of cable after prolonged exposure to heat conditions
of >45°C (>113°F) may affect coil size and length. Limit the
extension of the cable until it has returned to an ambient
temperature to prevent permanent stretch.

INST175-5 EN
Tech Support
1300 REDARC
Head Office
[phone]
New Zealand
[phone]
UK & Europe
[phone]
USA
[phone]
Canada
[phone]
Mexico
[phone]
redarcelectronics.com