Reece Wolfen 9505996 User manual

INSTALLATION
MANUAL
9505996 Wolfen Folding Shower Seat 600mm
9505997 Wolfen Folding Shower Seat 960mm
Installation Details | Warranty

Intro 02
Technical Information 03
Installation Instructions 05
Warranty 06
CONTENTS
Delivering unrivalled quality
Designed for absolute performance, Wolfen’s shower seats set new
standards in quality and durability. With 316 grade stainless steel
coach screw fixings, the shower seat has a convenient foldaway
design and is made from UV stabilised HDPE.

3
Product Code 9505996 9505997
Colour Stainless Steel Legs
White Shower Seat
Stainless Steel Legs
White Shower Seat
Finish Brushed Legs Brushed Legs
Material
304 Grade Stainless Steel
UV stabilised HDPE Shower Seat
316 Grade Stainless Steel Screws
304 Grade Stainless Steel
UV stabilised HDPE Shower Seat
316 Grade Stainless Steel Screws
Maximum
Load Rating 472kg 472kg
TECHNICAL INFORMATION
Wolfen Folding Shower Seat 960mmWolfen Folding Shower Seat 600mm

4WOLFEN INSTALLATION MANUAL | Wolfen Folding Shower Seat
WOLFEN INSTALLATION MANUAL | Installation Instructions
TECHNICAL INFORMATION
Wolfen Folding Shower Seat 960mm
9505997
Wolfen Folding Shower Seat 600mm
9505996
400
480
411
25*25*1.5
600
360
4-R12
125 350
6
400
40
360
94
784.5
600
25*25*1.5
25*25*1.5
220 centres
170 o oor
475 centres
400
480
411
25*25*1.5
960
360
4-R12
125710
6
400
40
360
94
784.5
960
25*25*1.5
25*25*1.5
170 o oor
830 centres
220 centres

5
INSTALLATION INSTRUCTIONS
Important Note
The Wolfen shower seat should be properly assembled, installed and cared for. Failure to follow the
below instructions may result in serious injury.
The 960mm shower seat meets AS 1428.1-2009 and both seats are manufactured from high quality
stainless steel with a HDPE seat. It has been tested to a loading of 1100N. Proper care must be taken
to install the grab bar to an appropriate load bearing base, using appropriate fixing bolts.
Installation Instructions:
Shower seats are specifically designed for comfort
and stability while showering and drying off. They
can be mounted anywhere within the bathroom
provided the location has been planned with a
supporting in-wall mounting structure. The seats
are designed for the user to bathe safely.
1. Confirm the contents of the box. The box
should contain 1 shower seat frame and
4 screws.
2. Test the up and down movement of the
seat, then set it down and consider the
following installations:
• When selecting the mounting location, install
only where there is proper structure support
within the wall. Measure the area of the seat
on the wall to avoid penetrating objects
behind the wall.
• The seat must be flat (and not angled to one
side) when installed. Use a levelling tool
when adjusting the height of each leg.
3. After completing final adjustments, position
the mounting legs close to the shower wall
and mark each hole location for drilling.
4. Drill the pilot holes.
5. Install the shower seat with the screws
provided. Inspect each screw to ensure
it is tight.
6. Test the seat by applying gradual pressure.
Maintenance
Clean product with mild soap and water.

6WOLFEN INSTALLATION MANUAL | Wolfen Folding Shower Seat
WOLFEN INSTALLATION MANUAL | Warranty
V1
REECE PRODUCT
QUALITY GUARANTEE
You have purchased a quality product from Reece
Australia Pty Ltd ABN 84 004 097 090 (“Reece”).
This product is covered by a 5 year replacement
product warranty and a 12 month warranty over
spare parts and labour.
5 YEAR WARRANTY
This warranty covers faults in the product
construction, material and assembly. Products
which are within 5 years from the date of purchase,
found upon inspection by an authorised Reece
representative, to be defective in construction,
material or assembly, will be repaired or exchanged
with an equivalent product free of charge.
Replaced items become Reece’s property.
All replacement products will be available for
collection without charge to the customer at the
nearest Reece branch to the customer’s location,
or elsewhere as agreed between the customer
and Reece.
Labour and Spare Parts
The labour for the replacement of products
and spare parts to which this warranty applies
will be supplied by Reece or relevant supplier
using licensed plumbers engaged by Reece or
relevant supplier within 1 year from the date of
purchase. Spare parts other than those listed in
the Manufacturer’s Provisions above, which are
within 1 year from the date of purchase found upon
inspection by an authorised Reece representative
to be defective in construction, material or
assembly, will be replaced free of charge.
Warranty Conditions
This warranty will apply only under all of the
following conditions:
• The item has been installed by a
licensed plumber
• Failure is due to a fault in the manufacture
of the product
• Proof of purchase (including the date
of purchase) is provided
• The installation of the product is in
accordance with the instructions provided
This warranty does not cover products purchased
as an ex-display without being fully checked and
tested for sale by the manufacturer.
This warranty does not include faults caused by:
• Unsuitable or improper use
• Incorrect installation or installation not in
accordance with the instructions provided
• Installation or part installation by the
purchaser or any person other than a
LICENSED PLUMBER
• Normal wear and tear
• Inadequate or complete lack of
maintenance
• Chemical, electrochemical or
electrical influences
• Harsh detergents or abrasive cleaners
used on product finishes
EXCLUSIONS
To the fullest extent permitted by law, Reece
excludes all liability for damage or injury to any
person, damage to any property, and any indirect
consequential or other loss or damage.
CLAIM PROCEDURE
For all warranty queries customers are to contact the
branch where the product was purchased. These
details can be found on your purchase invoice.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a
major failure and for compensation for any other
reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Don’t risk it, use a licensed plumber.™
products purchas
ed
5
YEAR
Q
U
A
L
I
T
Y
G
U
A
R
A
N
T
E
E

7
IF AFTER CHECKING THE
INSTALLATION INSTRUCTIONS
AND IMPORTANT
INFORMATION, THE PROBLEM
HAS NOT BEEN IDENTIFIED,
PLEASE CONTACT YOUR
LOCAL REECE STORE ON:
1800 032 566

reece.com.au/wolfen