Reece Base User manual

Installation Instructions
Base Vanity Unit
Please ensure a copy of the installation
instructions is left with the end user for future reference
CLEANING RECOMMENDATIONS
We recommend the use of soapy water or
approved cleaners for the Vanity Top.
Cabinets are moisture resistant. Cabinet
surfaces should be cleaned witha damp
cloth and dried.
This product should not be cleaned with
abrasive materials.
Damage caused by any improper treatment
is not covered by the product warranty - refer
to Warranty Conditions
Assembly Instructions - Vanity Unit - 2 Doors
Installation Instructions
1. Set up water inlet point and waste
for vanity top.
2. Place vanity into position and
ensure it is level (make minor
adjustment if required).
3. Drill pilot holesin the back of the
unit and fixunit to the wallusing
suitable screws. Ensure that the
screwsare fixed securely into a
solid wallor timber noggin. Minor
adjustments may need to be
made to align drawerrunners and
hinges.
4. All finaldoor and drawer
adjustments are the responsibility
of the installer at the time of
installation.
5. External edges where the
unit meets the floor and wall
should be sealed using flexible
waterproof sealants.
Published 19/12/2019

Installation Instructions
Base Vanity Unit
Assembly Instructions - Vanity Unit - 2 Doors & 3 Drawers
Please ensure a copy of the installation
instructions is left with the end user for future reference
Published 19/12/2019