Refine Ironmen 16L-A User manual

www.refine-dehumidifiers.comwww.refine-dehumidifiers.com
Installation and Operations Manual
F:
E-mail: [e-mail]
Add: NO.8, Mo gan shan Road,Beilun,Ningbo,Zhejiang,China
P: [phone]
[phone]
DEHUMIDIFIERS
Refine Dehumidifiers
Iromen16L-A

※ ※Table of Contents
Introduction
Specifications
Notice priorities
Introduction
Operation Panel
Use Instructions
Maintenance
.............................................................................................................................. 01
........................................................................................................................... 01
....................................................................................................................... 02
.............................................................................................................................. 03
....................................................................................................................... 04
Preparing the Unit for Use..................................................................................................... 05
....................................................................................................................... 07
............................................................................................................................. 08
Troubleshooting...................................................................................................................... 09
Warranty.................................................................................................................................... 10
REFINE-DEHUMIDIFIERS

-1- -2-
The machine through a vapor compression refrigeration principle , which can efficiently
remove airborne moisture . Especially for the home , office and other space dehumidification
range to prevent items from moisture , mildew , dry clothes can protect senior musical
instruments, high-end furniture and other unaffected humid environment , to create a good
living environment is a good helper .
※ ※Features/Specifications
Low Sound Levels <45dBA
Super Cop,1.85/kWH
The temperature control defrosting , more thorough, and more quick
large Water trank
Humity can be fixed within 1%
Human handspike design
Water Full protection
R410A Refrigerant
Self-Checking Function
Automatic humidistat control,Display Tube TEM
Keylock,Timing Memory starting
Universal Wheel
Purification
Note: This dehumidification capacity is at room temperature 30 ℃, relative humidity of
80% income test conditions
WARNING
Contact your installing contractor
Please call
Email: [email protected]
Refine Dehumidifiers: [phone]
Customer Service:
For additional questions concerning the operation of your dehumidifier,
Identification:
Model Number Ironmen 16L-A
Serial Number__________________________ Date of Purchase__________________________
For future reference, write down the model, serial number, and date of purchase so you
can identify your unit when seeking assistance. NOTE: data label on back of unit includes
serial number.
1Unplug when cleaning or storing this dehumidifier .
2. Do not immerse the machine in water or near water .
3. Do not place the machine near a heating device or flammable dangerous place.
4. Do not put your fingers or other objects into the outlet or plug the outlet .
5. Do not sit on this machine table .
6. Follow the requirements of the tank to drain .
7. Do not use this machine in a sealed environment to avoid fire.
8. Make sure the condensate drain down the installation so that you can continue to
be excluded .
9. If the power cord is damaged , please find the manufacturer or a qualified service
organization .
10. prohibit people with and without self-care ability or children to use the machine
without a guardian.
11. The machine must have a reliable ground lead or grounded outlet.
.
When using this machine , please note the following safety warnings :
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS
※introduction※Tplease:

-3- -4-
※Unit Overview※
※ Front View
※ Rear View
Control panel
Air Intake
Front cover
Wheel
Handle
LOGO
Subject
Power line
Air Outlet
Tank cover
Filter
External Pipe
A. Power Button:
B. " Up" and "Down" Button:
C. Air Purifier Button :Press this button to start the air purification , dehumidification
function off .
D. Anion Button : Press this button to start the anion .
E. Timing Button: In case the machine is running , pressing the button for the time off,
but the machine on a lower power operation , press this button for regular boot .
“Switch”key: turn on or off for each time in the boot, the conversion
between off once . Note shutdown after fan delay stopped after 1 minutes.
1）Adjust the humidity figures used for the humidity set button once every 1% rise or fall .
2）Adjust the time used for digital switch time setting, up or down button once every
hour.
Note: The "up" and "down" button to set within the 10S does not operate after that set
success. While holding down the Up and Down keys 2S can lock the keys , lock button to exit
the same way ).
FDC
Working
Defrost
》
》
88
Power
Cont.
Timing
Anion
Air
Purif.
Full Indication
数码显示
B
A
※Operating instructions※
※Control Panel Operation
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS

-6-
-5-
B. This machine uses a value consistent with the nameplate power outlet must be
grounded port.
C. Remove the power cord and reliably , securely plugged into a power outlet.
D. Make sure the machine 's inlet and outlet is not blocked or blocking other objects.
Ensure the inlet and outlet of the machine can effectively play the smooth performance of the
machine and reduce electricity costs .
E. Before Switch to air purification model,you should Install in the HAPE fliter or Activated
Carbon Fliter in side the air intake frame.
（ ）Running lights : After power- beep is heard, the machine into standby mode, and
this does not light , turned on, the lights lit , after the shutdown , the lights off . ( Note: The
standby display digital display profit or humidity )
（2）Water full indicator: When the water tank is full ( ie, magnetic switch off ) , the
machine automatically standby , the lights flash , the buzzer sounds five beeping . Water full
signal disappears , then automatically the original mode, the compressor 3 minutes effective
protection .
（3）Continuous running lights : In continuous mode , the lights lit , the other states ,
this lamp is off .
（4）Defrost indicator: When entering this light Always defrost operation , defrost
termination or other states , this lamp is off .
（5）Air purification lights: Anion lights are only lit when it is enabled , other state off.
（6）The lamp timer setting : Press time setting key to set the timer switch , the light
flashes, the setting is complete or in timing.
1
※Preparing the Unit for Use※
A. The placement of the machine : The machine can be placed in the figure requires full
play to its performance.
F. In order to avoid the repeated water tank caring,It is in strongly recommendation that to
extend the draining to ground if this unit would in long term running.if the outlet pipe get
wrapped or deflated,it would resulte bad water follow and even cause dead machine.
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS
※Lamp operation
Remove the air intake frame
then Install the HAPE fliter
or Activated Carbon Fliter in
Put External pipe through
the Vias on radiator cap
and connect it to the water
pipe which been fixed on
water collector
≥
≥
≥
≥

-7- -8-
6. Tank operations Notes
1 ) After the machine stops running when pulling the tank to maintain a steady water tank
removed.
2) While moving the tank ready to pour with both hands to hold up the bottom of the
tank.
3 ) Do not move and damage the tank float .
※ ※Maintenance and Repair
WARNING! Be sure to turn off the power before for maintenance to avoid accidents !
Because of the air filter is easy to accumulate dust , blocking the air intake passage ,
thereby affecting the dehumidification
effect , therefore, must be regularly
cleaned.
If the machine is in larger dust places,
should be cleaned once a ~ 5 days .
If the machine is used in relatively
clean environment can be cleaned once a
month.
Clean the filter method :
1.Remove the filter,Filiter may be
cleaned by Vacumming or By washing with warm water(no soap or Solvents),Insure
Fliter is dry prior to Restarting unit
2. Make Tank Empty and Unplug the Unit when it is not in using.
3. Do not use the machine near the stove , heaters and other heat sources or air
outlet of places, so as not to affect the dehumidifying effect or danger.
4. Do not use machine in where have Water Splash potential problem,to prevent
the leakage of dangerous
5. After the machine should be placed firmly before use, to prevent dumping, to
1. Clean the filter
Filter
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS
※Use Instructions※
1 . " On / Off " Button :
a.Press this " "Button, the unit will start running .
b.Press this" "button again,the unit will stop running .
※ Preferably stand for 3 minutes , so that the remaining water droplets on the
evaporator flows into the water tanks .
Please unplug the power cord after the machine is turned off to save standby power
consumption and avoid the risk of accidents .
2 ."Up" and "Down" Button
Used to adjust the set humidity , also used to adjust the timing shutdown and timing for
the start of the set time.
• Humidity setting adjustment range : Between 35 to 90 percent , up or down button
once for each 1% , when the set humidity < 35% , digital display "C0" enter the continuous
dehumidification mode , the first power-on defaults "50 %." ( Note : Continuous
dehumidification mode not affected by humidity )
• Time setting adjustment range : 00, 01 to 24 hours, up or down button once every 1
hour , 00 digital display indicates the timing when setting off or regular boot cancellation or no
timing settings.
Note: The regular boot and shutdown timing not both timing and timing is
automatically canceled after a power failure , do not remember.
3. Air Purifier :Press the button, air purification function is activated .
4. Anion : Press this button to start the anion .
5. Time off and Time on operations
Boot mode, press the " timer setting " key to start the timer off function , digital timer
flashes set the time, The display number of initial timing is 00,press the arrow keys to adjust
the settings within 5S(no flashes when Hold the Up/Down key continuously).adjusted to the
time required and leave your finger from panel,said the setuo is completed after 5S with no
touch ,display back to present condition humidity.( Note : In standby mode, press the "
timer settings " button to start the timer on function )
Always one Buzzer sound with every successful key pressing,only one Buzzer sound
as weel as to continuously press when finger left to Button.

avoid injury.
6. When using dehumidifiers in wooden furniture , floors and other
environments in attention control humidity , excessive dry conditions may cause the
wood to crack.
7. Severe turbulence , impact and tilt angles are large damage the machine : If
running noise becomes larger and so on . And the inclination angle of the large
residual moisture may cause the machine overflow.
8. Storage H, dehumidifier
When you are not using the product for a long time , and intended to be stored or
collection, consider the following steps:
1) The residual water tank emptying.
2) The dust filter clean .
3) Placement. fresh dry environment .
※ Troubleshooting ※
Solution
Trouble cause
Machine Won’t Work/
Display is Blank
Display Blank. Power outage
or poor connection
Check Power Supply
Check both ends of powercord
for good connection
Place unit on flat surface
in vertical orientation
Room temperature whether in
5℃~ 35℃this inner?
machinery not exceed
water or dehumidify
quantity small
Clear the filter
Filtration net whether jam
Room inner humidity temperature
too low Normal work condition
Trouble code HI:
Trouble code L0: Unit is sensing room temperature
below 33F.
Water Full protection Repositioning or pour water tank
Reinstall the float
Outlet or the outlet is blocked Clear obstructions
Trouble code:E1 Humidity Sensor or
communication error
Check sensor cable is properly
connected.Replace the Senser
Trouble code E4: Water Full protection
Unit is sensing room temperature
above 100F.
Decrease Room Temp
Check Sensor
Check Sensor Cable
Increase room temperature
Check Sensor
Check Sensor Cable
The water tank float tank drained
or re- install the float switch
normal contact
-9- -10-
※ ※Warranty
Seller warrants the equipment to be free from defects in workmanship and materials for a
period of 12 months after shipment (60 months/5 years on compressor, evaporator and
condenser). This warranty is limited, however, to the repair or replacement of defective
equipment. If it is necessary to return unit for service, customer is solely responsible for
proper packaging, transportation costs. Customer must initiate warranty process by
contacting factory. Do not send any component or product back to factory without Return
Material Authorization.
This limited warranty does not apply to any part or component that is damaged in transit
or when handling, has been subject to misuse, corr osion, chemicals, acts of God has not been
installed, operated or serviced according to the Seller’s instructions, or has been operated
beyond the factory-rated capacity or has been altered in any way. Routine maintenance is not
covered by this warranty.
Seller’s liability is limited to replacement of defective parts or components and does not
include any cost of labor (including, but not limited to, labor to remove and/or reinstall any
defective part), refrigerant or piping. Customer may elect to have unit fixed locally in which
case required replacement parts will be sent to customer at customer’s expense.
Refine shall not be responsible for loss of use of any product, loss of time, inconvenience,
or damage to other equipment, or any other indirect or consequential damage with respect to
property whether as a result of breach of warranty, neglect, or otherwise.
REFINE-DEHUMIDIFIERS
REFINE-DEHUMIDIFIERS

THE WARRANTIES AND LIABILITIES SET FORTH ARE IN LIEU OF ALL OTHER
WARRANTIES EXPRESSED OR IMPLIED, IN LAW OR IN FACT, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE.
Refine’s total liability, regardless of nature of claim shall not exceed original purchase
price of the product. If a product or component is replaced while under warranty, the
applicable warranty period shall not be extended beyond the original warranty time period.
The foregoing shall constitute the total liability of seller in the case of defective
performanceof all or any of the equipment or services provided to Buyer. Buyer agrees to
accept and hereby accepts the foregoing as the sole and exclusive remedy for any breach or
alleged breach of warranty by Seller.
-11-
REFINE-DEHUMIDIFIERS