Reflecta DigiMicroscope USB 200 User manual

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
reflecta DigiMicroscope USB 200
User Manual
www.reflecta.de

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Parts of Microscope
USB Line
Focus roller
Magnification
Ratio
Snap
LED Light Metal Fixed
Stand
Notes before use
1. Don’t dissemble the digital Microscope or change the interior parts,
it can cause damage.
2. Don’t clean the Microscope with alcohol organic solvents
3. Don’t touch the lens with your fingers.
4. Avoid outdoor use if possible.
5. Storage temperature , 0°C ~ 40°C, Humidity:45%RH ~ 85RH%.
6. In case the product gets wet, leave PC connection immediately. And do not dissemble or dry by hair
dryer. Send to repair center if the digit microscope was effected by liquid or other elements.
7. Measurement Data only for reference.
Scope of delivery
Digital microscope with USB interface
Stand
Software CD
Quick Start Guide
Calibration ruler

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Hardware system requirements
Wíndows XP, VISTA´, WIN7, WIN8, WIN10 Pentium 1G, Celeron, AMD 1G & above,
128MB Memory, 150MB Hard Disc memory space, 16-bit & above
VGA, CD-ROM, USB2.0 or USB1.1.
How to install the Driver
The Digital Microscope is a free Driver Product，it can be worked immediately after connected to the
computer with operation system above win2000 version.
1. Connect the Portable digital microscope by USB2.0 cable to your computer, double click “my
computer” icon on your computer desktop, below interface will be shown up.
2. Double click the Video device icon as above red marked in your computer. Now it is ready to use.
If you can’t find the Video device, or if your computer can’t recognize it,
Please follow below steps to install the driver.
Insert the attached CD, open “My Computer”, and double click the “DVD/CD Driver” to open the CD.

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Driver installation
Choose and install the Driver, then reset the computer

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Reset the computer after driver installation at once;
Installation may be blocked by the antivirus software, so let the antivirus software allow all processes, or
close the antivirus before installing. If installation succeeds, you can see the icon on the Toolbar,
also the software desktop icon, double click to run it.
Now you can use the microscope. Long press the SNAP button on the microscope to take images, and the
ZOOM button to have digital zoom function.

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Measurement installation
Choose and install the Measurement

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Click “Finish” and the installation completes.
Microsoft .NET Framework installation
If the PC is Windows XP or older version, .Net Framework 4.0 is needed. Install it.

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
After the installation completes, double click at computer desktop to start using the software.
Plug-in the devices, Display in operation window

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Click open the operation system
Choose the Image resolution from 320*240 to 1600*1200, default at VGA Mode640*480
Click To use measurement function.

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Click to open pictures, and click to save pictures
Video PLAY (Pause) ,STOP
Image Parameter including Image setting and special effects

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Magnifier
Click Ruler, as followings

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Click start calibration make sure certain accuracy.
Our experience told us that measurement could be controlled at 99% high precision. Measure tolerance
could be caused from human eye distortion and defocus. More practice is helpful to measurements.
Key in the Measure data (Pixel), Unit, and Click’ OK’

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Warning: Please do calibration again once Magnification Ratio changed.
Color setting of display character
Click to export word or excel format.

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
Example: Measure data under word file
From Left to right:
Line, ring, Square, Polygon, Set-line Length, Oval, Arc, Point to Point distance, Point to Line distance,
Parallel line, Angle

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
For example 1
Line measurement:
For example 2
Rectangular measurements:

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
For example3
Ring measurements:
For example 4
Arc measurements:

reflecta gmbh • Merkurstrasse 8 • D-72184 Eutingen i.G
Phone: [phone] • Fax: [phone] • www.reflecta.de • [email protected]
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from your
household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where
you purchased the product.

reflecta gmbh •Merkurstrasse 8 •D-72184 Eutingen i.G
Phone: [phone] •Fax: [phone] •www.reflecta.de •[email protected]
reflecta DigiMicroscope USB 200
Guide d'utilisation
www.reflecta.de