Regency MAXITROL GV60 Operating and maintenance instructions

1 3
42
Quick Start Guide
To Turn On The Fireplace
Simultaneously press the OFF 2and LARGE FLAME 3 buttons until a short beep conrms the start sequence has
begun; release buttons.
The handset will automatically go into temperature control mode or manual mode.
For Flame Height Adjustment
When ignition is conrmed, the unit will automatically turn to maximum flame height.
• Press and hold LARGE FLAME 3 button to increase flame height.
• Press and hold SMALL FLAME 4 button to decrease flame height.
• For ne adjustment tap the LARGE FLAME or SMALL FLAME buttons.
For Fan Operation
The circulating fan has 4 speed levels from low (1 bar) to high (4 bars).
•Briefly press the SET 1 button to scroll to fan mode. Fan and Level icons will flash.
•To turn fan on, press LARGE FLAME 3 button until at least 1 speed level appears.
•Press LARGE FLAME 3 button to increase fan speed.
•Press SMALL FLAME 4 button to decrease fan speed.
•To turn OFF fan, press SMALL FLAME 4 button until all 4 speed level bars disappear.
To Turn Off The Fireplace
Press the OFF 2button.
MAXITROL GV60 REMOTE CONTROL
Maxitrol GV60 Remote Control
Buttons Legend
88
88:88
F
am
pm
AUX
MANTEMPTIMER
P1
P2
C
°
°
°C/24hr or °F/12hr Clock setting
Signal indicator
Battery status
Time setting
Light operation
(not available on HRI3E/LRI3E)
Solenoid Valve/Burner Open & Close
Fan level icon
Temperature setting
On/Off Temperature setting
Program timer setting
Fan operation
Modes of operation
919-750 12/7/16

Quick Start Guide
MAXITROL GV60 REMOTE CONTROL
For Setting The Time
Simultaneously press the LARGE FLAME 3and SMALL FLAME 4
buttons.
• Press the LARGE FLAME 3button to set the hour.
• Press the SMALL FLAME 4button to minute.
• Press the OFF 2 after setting the time.
1 3
42
Maxitrol GV60 Remote Control
Buttons Legend
°F/12 Hour Clock & °C/24 Hour Clock
The handset has a default setting of °F and a 12 hour clock display.
•Press and hold the OFF 2and SMALL FLAME 4buttons until the
display changes to the °C and 24 hour clock.
For Modes of Operation
Consult your user guide that was included with your purchase. Or visit the website to download a new user guide.
www.regency-re.com
Troubleshooting
Q: My remote does not work.
A1: Check the batteries in the handset.
•1 x 9V (quality alkaline recommended)
•Battery replacement is recommended every season.
A2: Check the batteries in the battery back-up located in the unit
•4 x 1.5V “AA” (quality alkaline recommended).
•Low battery indication: Frequent beeps for 3 seconds when motor turns. Do not disconnect the battery back-up.
Internal damage(s) may occur which are not covered by the manufacturer warranty.
Q: I do not see a pilot flame.
A: This is a feature of the unit. The system shuts off the re completely if there is no change in flame height for 5
days. To turn back on, follow “To Turn On The Fireplace” instructions.
Q: I live in a cold climate and would like the pilot flame to stay on.
A: Follow “To Turn On The Fireplace” instructions, then press and hold SMALL FLAME 4button to set the appliance
to continuous pilot.
919-750 12/7/16