rego DESIGN 10293 User manual

Light Kit for Santa's Visit #10293
Installation Guide

Hi There!
We’re here to help you get started on the Light Kit for LEGO®
Santa's Visit #10293 Installation Guide .
This PDF details the instructions for the LED light kit only. If you
are wishing to purchase this product, please go to our webaite
at: www.regodesign.net.
If you run into any issues, please refer to the troubleshooting
section towards the end of this guide or contact us at email:
[email protected].
Enjoy!
Light Kit for Santa's Visit #10293
INSTALLATION GUIDE
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS 2

5 x 15cm Warm White Bit Light
2 x 30cm Warm White Dot Light
1 x 15cm Warm White Dot Light
4 x 15cm White Dot Light
3 x 15cm White Bit Light
LEGO PIECES:
2 x 6-Port Expansion Board
2 x 4-Port Expansion Board
1 x USB Power Cable
1 x Battery Case (Battery not included)
Light Kit for Santa's Visit #10293 Installation Guide
PACKAGE CONTENTS:
INSTRUCTIONS
1 x Flame Torch Module
3
1 x 5cm Connecting Cable
1 x 15cm Connecting Cable
2 x 30cm Connecting Cable
x 6 (Random Color)
x 4
Viscous Accessories
1 x Switch Remote Control
1 x Seven Lights
Strip

Light Kit for Santa's Visit #10293 Installation Guide
Contents
Before You Begin
Instructions
Final Product
Troubleshooting
Contact
20
21
5
8
24
INSTRUCTIONS 4

Cables can fit in between and underneath
LEGO® bricks, tiles, and plates providing they are
laid correctly between the LEGO® studs.
Please be careful when join LEGO® together
around cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: You can't use force on LEGO® to
connect over a cable or it will result in damaging
the cable and light.
Please paid extra care when inserting connectors to
ports of Expansion Boards. When connectors can be
inserted only one way and it is the right way. With
the expansion board facing up, look for the soldered
“=” symbol on the left side of the port. The connector
side with the wires exposed should be facing toward
the soldered “=” symbol as you insert into the port. If
a plug won’t fit easily into a port connector, which it
should. PLEASE DO NOT FORCE IT.
Incorrectly inserting the connector will result in bent
pins inside the port or even overheating of the
expansion board when connected. So please don't
do it.
Laying cables in between and
underneath bricks
Connecting Cable Connectors
To Expansion Boards
INSTRUCTIONS
Light Kit for Santa's Visit #10293 Installation Guide
5
Before You Begin

Light Kit for Santa's Visit #10293 Installation Guide
Before You Begin
Connecting Cable
Connectors To Strip Lights
Please take extra care when inserting
connectors to ports on the Strip Lights. When
connectors can be inserted only one way and
it is the right way. With the Strip Light is
facing up, please ensure the side of the
connector with the wires exposed is facing
down. If a plug won’t fit easily into a port
connector, which it should. PLEASE DO NOT
FORCE IT. YOU will damage the plug and the
connector.
INSTRUCTIONS 6

Light Kit for Santa's Visit #10293 Installation Guide
7
When installing Bit Lights under
LEGO® pieces, please ensure
they are placed the correct way
up (Yellow LED component
exposed). You can place them
directly on top of LEGO® studs
or in between. As the picture
show.
INSTRUCTIONS
Installing Bit Lights Under
Lego® Bricks And Plates
Before You Begin

To ensure a correct, quick, and smooth
installation of your light kit, please read
and follow each step carefully.
If you run into any issues, please
refer to the online troubleshooting
guide or just send us a quick email at
[e-mail]
We will answer as soon as possible.
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
INSTRUCTIONS
8

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the
light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
1
9

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
2
10
30cm Warm White Bit Light x 1
LEGO Brick
15cm Warm White Bit Light x 1
LEGO Brick

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
3
11
30cm Connecting Cable x 1
4-Port Expansion Board
15cm Warm White Dot Light x 1

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
4
12
15cm Warm White Bit Light x 1

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
5
13
Seven Color Strip Light x 1
15cm Warm White Bit Light x 2
This Light has ten
lamps,which are divided
into three sections and
twisted together.The ten
lamps shall not overlap
as much as possible.

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
6
14
30cm Connecting Cable x 1
6-Port Expansion Board x 1

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
7
15
15cm White Dot Light x 2

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
8
16
15cm Connecting Cable x 1
Flame Torch Module; Viscous Accessories
15cm White Dot Light x 2
LEGO Brick
15cm Warm White Dot Light x 1
LEGO Brick

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
9
17
5cm Connecting Cable x 1
4-Port Expansion Board x 1
Switch Remote Control
Viscous Accessories
15cm White Bit Light x 3
LEGO Brick

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
10
18
30cm Warm White Bit Light x 1

DISCONNECT CONNECT
RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAIDPOWER ON TESTNOTE ICON
Light Kit for Santa's Visit #10293 Installation Guide
INSTRUCTIONS
LEGEND
11
19
6-Port Expansion Board x 1 USB Power Cable x 1
5cm Connecting Cable x 1

INSTRUCTIONS
Light Kit for Santa's Visit #10293 Installation Guide
This finally completes installation of the Light Kit for Santa's Visit #10293 Installation Guide .
FINAL PRODUCT
20