Rehan Electronics Looky 5 HD User manual

Rehan Looky 5 HD Quick Start Guide
Installing Battery: Connect the battery handle of
the Looky by sliding it onto the connector until
you hear it click into place. The battery also
functions as the handle.
Turn On/O: Press and hold the black power
button located in the upper left-hand corner. You
will hear a sound increasing in pitch when
powering on and decreasing in pitch when
powering o.
Distance Viewing: Hold the device up to view an
object at a distance and tap the screen to focus.
Focus Screen: Tap the center of the screen to focus the image.
Change Contrast: Swipe your nger from the top
of the screen to the bottom to cycle through
contrast modes.
Zoom In/Out: Place your nger on the screen and
slide your nger up to increase magnication and
down to decrease magnication.
Take a Photo: Press the black power button on the
top of the Looky to take a photo. Press the power
button again to delete the photo and switch back
to “Magnier Mode.”

View Photo Details: Press and move one nger on
the screen to pan through the captured image.
Advanced Menu: Place your nger on the bottom section of the screen
for 2 seconds to enter the advanced menu mode.
Charging Battery: Plug the charger into the power
port in the upper right-hand corner of the device
and plug the other end into a power outlet. A full
charge takes about 4 hours.
lrie AT Support
[phone] ext 3
[e-mail]