feel the small alarm hand is at the correct alarm time.
Alarm on/off: A large, silver button
is provided on the side of your
clock. Slide the button up to turn
the alarm on. Slide it down to turn
it off. When activated, the alarm
sounds a series of beeps until it is deactivated by the
off or the snooze buttons.
Snooze: A large, silver button
directly at the top of the clock can
be pressed for an extra few
minutes of sleep once the alarm
has gone off. Or, press the snooze
button at any time to provide extra illumination to the
face of the clock.
on the clock. With clock facing you, turn the knob
counterclockwise. Adjust to correct time by looking at or
feeling the hands. Tactile Braille is provided. When
finished, push the knob back in and replace the face
cover.
Telling the time: Remove the clear,
plastic face cover at any time to feel
the hands and Braille markings.
While the clock is sturdy and well
made, we recommend using a
gentle touch for long-lasting
enjoyment of your clock. Always replace the face cover
when finished.
Setting the alarm: Set the alarm
with the face cover off and the knob
on the back in its “in” position. With
the clock facing you, turn the dial
counterclockwise until you see or
Congratulations on your purchase of the REIZEN
Braille Quartz Clock, one of the finest clocks available
for people who are blind or who have low vision.
Install your battery: The battery
compartment is located on the back
of the clock. Slide the compartment
door down and off. Tactile finger
grips are provided. Install one AA
battery into battery box located deep within the clock.
With the top of the clock facing away from you, the
positive end of the battery (with the nub) should be to
the right as you install it. Replace the battery cover.
Setting the time: Remove the clear,
plastic face cover. On the back of
the clock, just over the battery
compartment door is a large, black
tactile knob. Gently lift the knob out.
Turning the knob in this “out” position moves the hands
234
