Reliable SewQuiet 5000 User manual
SewQuiet 5000
IndustrIal dC Brushless servomotor
servomoteur IndustrIel à Courant ContInu sans BalaI
servomotor IndustrIal sIn esCoBIllas de Cd
InstruCtIon manual
GuIde d’utIlIsatIon
manual de InstruCCIones
FUSE (10A)SPEED (RPM)
DC SERVOM OTOR
SewQuiet 5000
Keystone Sewing Machine Company, Inc.
6
InstallatIon
Put the bottom of the motor upwards to the tabletop and fix the motor to the
tabletop with the bolts provided. Connect the treadle rod with the connecting rod
joint.
MACHINE TYPE SPEED SELECTOR PULLEY SIZE APPROX. SPEED RPM
Basic single needle 34 #90MM 4500
Basic two needle/needle feed 22 #90MM 2150
Walking foot (Except MSK-1541S) 18 #90MM 1850
MSK-1541S 22 #90MM 1960
Sergers – overlock 38 #90MM 6000
Blindstitch 22 #90MM 1800
Zig-Zag (20U style) 15 #90MM 1800
Zig-Zag (High Speed) 34 #90MM 4500
Zig-Zag Walking foot 17 #90MM 1930
In order to prevent possible damage to your machine, if the machine you have
is not in the categories list, please call your dealer to obtain the correct speed
setting and pulley size.
hoW to ChanGe the sPeed
• Press and hold the down
v
speed selector for 2 seconds. The LED
will change to S.0
• Press the up ^
speed selector 3 times until the LED changes to S.3.
• Press the down
v
speed selector again. The LED will show the current speed.
• Press the up ^ speed selector to increase the speed or the down
v
selector
button to reduce the speed (increments of 100 RPM).
Keystone Sewing Machine Company, Inc.
7
hoW to ChanGe the dIreCtIon
• Press and hold the down
v
speed selector for 2 seconds. The LED
will change to S.0
• Press the up ^
speed selector 2 times. The LED will change to S.2.
• Press the down
v
speed selector again. The LED will change to the current
rotation set r.P or r.E
• Press the up ^ or down
v
speed selector to change the current setting
and wait 4–5 seconds. The set pattern will be saved automatically.
error Codes
Error 1: Short circuit.
Error 2: 4 Pin connector from the motor to the PC board wires may be loose
or broken.
Error 3: The motor has activated the automatic protection circuit.
Error 4: Data storage error or defective PC board.
Error 5: Not Applicable
Error 6: Indicates that the sensor plate positioning is wrong or the sensor is
defective.
Keystone Sewing Machine Company, Inc.
8
Reliable Corporation (“Reliable”) warrants to original purchaser of its products that
every product sold by Reliable (a “Reliable Product”) is free from defects in material
and workmanship for a period of one year from the date of purchase, if properly used
and maintained. Subject to the conditions and limitations set forth below, Reliable
will either repair or replace any part of a Reliable Product that proves defective by
reason of improper workmanship or materials. If the defective Reliable Product is
no longer available and cannot be repaired effectively or replaced with an identical
model, Reliable shall replace the defective Reliable Product with a current Reliable
Product of equal or greater value. Repaired parts or replacement products will be
provided by Reliable on an exchange basis, and will be either new or refurbished to
be functionally equivalent to new. If Reliable is unable to repair or replace a Reliable
Product, it will refund the current value of that Reliable Product at the time the
warranty claim is made.
This limited warranty does not cover any damage to a Reliable Product that results
from improper installation, accident, abuse, misuse, natural disaster, insufficient or
excessive electrical supply, abnormal mechanical or environmental conditions, wear
and tear resulting from normal use of the product, or any unauthorized disassembly,
repair, or modification. This limited warranty does not extend to any indirect,
consequential or incidental damages that may be suffered by a user or from the use
of a Reliable Product, including without limitation, any liability for third party claims for
damage, and is limited to the amount paid by the original purchaser Reliable Product
with respect to which this limited warranty protection applies. This limited warranty
does not apply with respect to products that have been altered or which are missing
serial numbers or for products not purchased directly from Reliable or a dealer
authorized by us to sell Reliable Products.
This limited warranty is the only warranty that applies to any Reliable Product,
supersedes any and all terms that may be contained in any other document or
purchase order and may not be altered or amended except expressly in writing by
Reliable.
To obtain a repair or replacement under the terms of this warranty, please contact our
customer service group at 1-800-268-1649 or at support@reliablecorporation.com.
You will be required to submit an original receipt via fax or e-mail. The receipt must
reflect that you are the original purchaser, the product was bought directly from us or
from an authorized Reliable dealer and that the warranty claim is being made within
the warranty period. You will be issued a return authorization number (RA#) and
asked to ship the defective product together with proof of purchase and RA#, prepaid
insured to the following address:
Reliable Corporation, 5-100 Wingold Avenue, Toronto, ON M6B 4K7. Freight collect
shipments will be refused. The risk of loss or damage in transit will be borne by the
customer. Once Reliable receives the defective product, it will initiate the repair or
replacement process.
RELIABLE PRODUCTS WARRANTY
Keystone Sewing Machine Company, Inc.
9
Click Image for SewQuiet 5000 Product Page
833 N 2nd Street
Philadelphia, PA 19123 USA
215/922.6900
www.keysew.com
Table of contents
Other Reliable Engine manuals
