RELSIB WT51 User manual

Protect the thermometer from overheating, undercooling and moisture penetration
inside the thermometer. Do not heat the thermometer over 70⁰C .
The power level of the signal radiated by the thermometer does not exceed the
established norms. But the thermometer may be sensitive to electromagnetic
interference generated by other devices. It is therefore recommended to avoid working
in close proximity to the thermometer electronic devices that generate strong
electromagnetic field.
Do not attempt to repair the thermometer by yourself. This can result in inaccurate
readings or thermometer failure.
If the thermometer is not used for a long time the battery should be removed and
stored separately.
Observe polarity when replacing the battery.
Lithium battery and the device itself should be disposed off in accordance with local
regulations and not be thrown away with household waste.
Run the Application by clicking on the button in the center
of the screen.
Turning on/off the thermometer:
To turn the thermometer on press the button "on/off" on
the thermometer.
To turn off the thermometer press the button "on/off" on
the thermometer once again or in the Mobile Application.
Operational modes of the thermometer:
"Device search"- the Indicator emits double light impulses
of the green colour.
"Measurement mode and data transmission" – the
Indicator emits short single impulses of the green color.
Operational time in the “Device search mode” till automatic
switching-off equals 180 seconds.
The thermometer RELSIB WT51 is a modern, accurate and safe device for
temperature measurement. Before working with the thermometer read carefully the
recommendations for use. This will allow to avoid mistakes during operation and
measurements, and become familiar with its capabilities.
The thermometer is designed to measure temperature of liquid, granular and gaseous
media in a wide range, with the capability of signaling, monitoring and data
presentation in the form of a graph, data archiving and sending them via e-mail.
The compact size of the thermometer allows it to be always with you and solve all the
problems with measuring temperature at work and at home.
The thermometer can only be used in conjunction with a mobile device having the
wireless interface Bluetooth 4.0 and running under the operating system iOS or
Android. As a rule, a smartphone or a tablet is used in the role of the mobile device to
operate with the thermometer. Special software - a Mobile Application is used to
display the measured temperature. The Application is used for linking the thermometer
up to the mobile device and its control.
1. Electronic thermometer RELSIB WT51;
2. Case for storage and transportation of the thermometer;
3. Lithium battery CR2032;
4. Coloured markers - 6 pcs;
5. Key for the battery replacement;
6. Holder for mounting the thermometer;
7. Instructions for use;
8. Warranty card.
Connecting the thermometer to a mobile device:
Connect the thermometer to a smartphone in the following way: click on the " + "
button and then on the settings screen of the thermometer select "Thermometer".
Select the Search ID on the options screen of the thermometer, and then in the search
box click on the right thermometer.
Enter a name of the thermometer and choose a color for the marker.
The thermometer can be used:
Turning on
by pressing the
button
Connection with a
mobile device
Automatic
switching-off the
thermometer
180 sec оff
оn
www.relsib.com
In industry and
agriculture
In everyday life, including
for measuring the
temperature of food
In R&D
Set
3
5Preparation for work
6The settings of the thermometer
2 Designation
ELECTRONIC
THERMOMETER
RELSIB WT51
Instructions for use
РЭЛС.421413.042 И1
In R&D In everyday life, including
for measuring the temperature
of food
In industry and
agriculture
1
4Security measures
Instructions for use
Make sure that Bluetooth is turned on at the mobile device ( for Android version 6.0
and higher turn on Geolocation)
Download the Mobile Application "Thermometer Relsib" or "Thermometer
Smart Family" (universal mode) either from the manufacturer's website or the
Internet resource App Store or Google Play.
Install the Application on your mobile device.
Insert the lithium battery CR2032 in the thermometer.
Attach a marker of a preferred colour to the cap of the thermometer. Marker is
required for identification of the thermometer when several thermometers are used
at the same time.
If necessary, set the upper and lower temperature limits and enable the signaling.
If the thermometer is successfully connected, a screen with the factory settings of the
connected device will be displayed on the smartphone.
By clicking on the return icon, go to the thermometer settings screen.
Cannot connect to the device?
Possible causes and their solutions:
1. The battery has failed - replace the battery.
2.The thermometer works with another device or the other Mobile Application in your
device - turn off all other running Applications and devices.
3. Bluetooth or Geolocation is not enabled - turn on Bluetooth and Geolocation.
installing/replacing the lithium battery installation of the marker

NPK RELSIB
web: www.relsib.com
e-mail: [email protected]
79/1 Krasniy Prospekt
Novosibirsk, Russia
[phone]
phone:
For inquiries and offers:
e-mail:
ICQ:
[phone]
663-046-665
[email protected]
If the temperature is beyond the set upper or lower level
the audible signal and vibration are activated.
To disable the alarm you can press the flashing circle or
a pop-up window (depending on the operating system on
which the App is installed)
After pressing the button "Off" or in case of break
of the connection between the thermometer and
the device data received since the start of the
measurement are automatically archived and
recorded in the memory of the mobile device.
To view the data, you should go to the screen
History by pressing the icon
You can look through the data by double-clicking
on the date in the calendar.
The recorded data in xls format can be sent via
email by clicking on the icon
8 Working with data
Having clicked on the back icon on the settings screen you will get to the screen of the
thermometers connected to the application; it displays the current temperature as well
as maximum and minimum measured temperatures and the level of the battery charge
of the thermometer and the signal level. You can identify the thermometers by a name
and a marker colour.
In order to change the settings of the thermometer, press and hold a line with a
specified thermometer, or press the "gear" icon on the measurement screen
(depending on the operating system on which the app is installed).
Warranty period is 2 years.
The warranty does not cover thermometers damaged by improper use,
penetration of water or other liquids, as well as in case of mechanical damage.
The warranty does not apply to the lithium battery CR2032 and packaging.
In the event of a claim please send the thermometer together with the completed
warranty card to the address of the service department.
Ask to complete the warranty card by a trading organization when purchasing the
thermometer.
9 Technical parameters
10 Warranty
Measurement
7
The name of the thermometer, the color of the selected marker, the button of
measuring units selection, settings icon, level of the Bluetooth signal and the battery
charge level are displayed at the top of the measurement screen.
In the field of measurements the current temperature and the maximum and
minimum values achieved from the start of measurement are displayed. Pink and blue
colors show the upper and lower thresholds for signalling.
To reset the achieved minimum and maximum values from the beginning of the
measurement use the button "Reset"; to turn off the thermometer use the button
“Off”. The time of measurement (thermometer opeartional time) is displayed at the
top of the screen.
The application can work with 3 ... 6 thermometers (depending on a model of the
mobile device).
If in the measurement mode to press the icon , then you can watch
the changes of the readings in the form of a graph, if necessary you can scale it.
www.termometr-wt51.relsib.com
Manufacturer:
Measurement range: -40 ...+ 125°C
Measurement error: +30 ... + 45°C - ± 0.2°C
-10 ...+70 °C - ± 0.5°C
-40 ...+10 °C and +70 ...+125 °C - ± 0,7°C
Waterproofness: IP 54
Overall dimensions, not more: 28mm(w) x 76 mm(l) x 12 mm(h)
Weight, not more: 50 g
Power of electromagnetic radiation,
not more: 4 dBm (2.5 mW) *
Time of continuous operation
with one battery: 3 months
Operational time with one battery
at everyday 6 hour measuring: 12 months
Lithium battery: CR2032
Data transmission interface: Bluetooth 4.0 (Bluetooth Low Energy)
Operating system of the mobile Application,
version, higher than: iOS v7.1, Android v4.3
* That is 20 time lower than the permitted values for pregnant women and persons under 18 years old.
Marker
Button for the thermometer
switching-off
Settings
Measurement time
Upper level for signaling
Current temperature and upper
and lower achieved measurement
values
Lower level for signaling
Button for current measurements
reset
Name of the thermometer