Remington 762 User manual

SECURITY COLOR CAMERA
INSTRUCTION MANUAL
MODEL # 00762
REMINGTON SECURITY

Camera Features:
14
Microphone.
2.1
Camera Port:
This unit has a built-in microphone that gathers sound at the camera
location and transmits it to the television or monitor.
This is a DIN port for hook-up from the camera to the television or
monitor.
3.1
Wide-angle lens: This lens allows viewing of a wide area.
Security Camera Specifications:
Integrated Lens:
Resolution:
Power Consumption:
Auto Iris Shutter:
Min. Illumination:
Dimensions:
Weight:
3.6mm F 2.0 fixed focus
420 Horizontal TV Lines
I.3 Watts
l/60 - l/100,000
l.OLux
1 3/4”(H)x4”(L)xl 7/8” (WI
Approx. 4 oz.

Basic Camera to TV Installation:
1.1
Unpack all parts from the shipping box.
2.1
Identify the following parts:
A*) Camera with built-in microphone with stand/mount
B-1
60’ OF COAXIAL CABLE
C-1
UL-Approved power supply
D-1
Mounting hardware
EJ
Instruction manual
3.1
Install or mount the camera at the desired location
SUBJECT TO DIRECT SUNLlGHT OR HlGH LlGHT. REMEMBER: NEVER AM CAMERA DIRECTLY INTO
THE SUN. Make sure you have enough coaxial cable to reach the television or monitor you
intend to use.If you need additional cable, contact your nearest dealer to purchase our optional
extension kit.
4.1
The coaxial cable supplied has one end with a Din connector and the opposite end with
three RCA plugs.
Slowly insert the Din plug into the back of the camera being careful to align
the din plug correctly: DO NOT force the plug into the camera it only inserts inone direction.
5.)
Lead the cord back to your TELEVISION, MONITOR, or VCR.Locate your audio and
video “in” jacks.
Insert the yellow RCA plug into the yellow video ‘in” port, and the white RCA
plug into the white audio “in” port. (Refer to Television, Monitor, or VCR Instruction Manual)
6.)
Plug the power supply into a wall outlet and the other end into the remaining RED plug.
7.)
Turn the power to the TV, Monitor, or VCR on and select the video mode from the menu
that matches the inputs to which the camera is connected.This is usually done through the
‘Menu” button on the remote control.For
TV’s with the picture-in-picture feature refer to the
Ws instruction manual. For additional information consult your TV, Monitor, or VCR instruction
manual.
Focus camera by slowly turning the lens to optimum clarity.
NOTICE:
1-I
TO PROTECT CAMERA DO NOT EXPOSE TO EXCESSNE DUST OR HUMIDITY.
2-I
HANDLE WITH CARE. DO NOT PlACE IN A LOCATION SUBJECT TO VIBRATION.
3.1
DO NOT PLACE CAMERA IN A LOCATlON SUBJECT TO DIRECT SUNLIGHT OR HIGH LIGHT.
REMEMBER: NEVER AIM CAMERA DIRECTLY INTO THE SUN.
4-I
THE USER OF THIS SYSTEM IS RESPONSIBLE FOR CHECKING AND COMPLYlNG WlTH LOCAL,
STATE AND FEDERAL LAWS AND STATUTES CONCERNING THE RECORDING AND MONITORING
OF AUDIO SIGNALS.
WARNING:
MAKE SURE THE POWER TO THE TELEVISION IS TURNED OFF AND THE UL-APPROVED POWER SUPPLY
IS UNPLUGGED FROM THE POWER SOURCE WHEN CONNECTING THE CAMERA.