ALC OBSERVER AWSC25 User manual

Model AWSC25
Wireless
Outdoor
Security
Camera
Wireless Video Surveillance System
Wireless Made Simple.
QUICK START GUIDE
ACCESSORY
Compatible with ALC AWS2155
Video Surveillance System
User Guide
Please read these instructions completely
before operating this product.

— 1 —
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .....................................................................2
INTRODUCTION..........................................................................................................5
System Contents .......................................................................................................5
Getting to Know Your Camera ...................................................................................6
INSTALLATION ............................................................................................................7
Installation Tips ......................................................................................................... 7
Night Vision................................................................................................................7
Installing the Camera(s) ..............................................................................................8
Camera Pairing ........................................................................................................10
Turning the Camera On or Off ..................................................................................12
Additional Features ..................................................................................................12
MAINTENANCE........................................................................................................ 13
Monitor ....................................................................................................................13
Camera....................................................................................................................13
TROUBLESHOOTING .............................................................................................. 14
PRODUCT SPECIFICATIONS.................................................................................. 16
Camera....................................................................................................................16
WARRANTY...............................................................................................................17

— 3 —— 2 —
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock do not remove cover (or
back). No user serviceable parts inside. Refer servicing to qualied service
personnel.
DANGEROUS VOLTAGE: The lightning ash with arrowhead, within an
equilateral triangle, is intended to alert the user to the presence of
uninsulated dangerous voltage within the product’s enclosure that may be of
sufcient magnitude to constitute a risk of electric shock topersons.
ATTENTION: The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Products with CE Marking comply with EMC Directive (2004/108/EC); Low Voltage
Directive (73/23/EEC); R&TTE(1999/5/EC); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance with these directives implies conformity
to the following European Norms:
EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328
PRODUCT SAFETY: When used in the directed manner, this unit has been designed and manufactured to ensure your
personal safety. Improper use of this product can result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these instructions handy for future reference.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FCC Compliance Statement: This device complies with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to
Part 15 of the FCC rules and ETSI(EN) 300328. These limits are designed to provide reasonable protection
against harmful interference in residential installations. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause interference to radio or television equipment reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Move the equipment away from the monitor.
• Plug the equipment into an outlet on a circuit different from that to which the monitor is connected.
• Consult the dealer or an experienced radio/television technician for additional suggestions.
CAUTION: Any changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
IMPORTANT SERVICE SAFETY INSTRUCTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
1. Read and Follow Instructions - All the safety and operating instructions should be read before the
product is operated. Follow all operating instructions.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - Comply with all warnings on the product and in the operating instructions.
4. Power Sources - This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supplied to your location, consult your
video dealer or local power company. For products intended to operate from battery power, or other
sources, refer to the operating instructions.
5. Overloading - Do not overload wall outlets or extension cords as this can result in the risk of re or
electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked
wire insulation, and broken plugs are dangerous. They may result in a shock or re hazard. Periodically
examine the cord, and if its appearance indicates damage or deteriorated insulation, have it replaced
by your service technician.
6. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.
7. Surge Protectors - It is highly recommended that the video equipment be connected to a surge
protector. Doing so will protect the equipment from damage caused by power surges. Surge
protectors should bear the UL listing mark or CSA certication mark.
8. Uninterruptible Power Supplies (UPS) - Because this product is designed for continuous, 24/7
operation, it is recommended that you connect the product to an uninterruptible power supply. An
uninterruptible power supply has an internal battery that will keep the product running in the event of a
power outage. Uninterruptible power supplies should bear the UL listing mark or CSA certication mark.
CAUTION: Maintain electrical safety. Power line operated equipment or accessories connected to this
product should bear the UL listing mark or CSA certication mark on the accessory itself and should not be
modied so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or
re. If in doubt, contact qualied service personnel.
Recycling and Disposal Information:
• Do not dispose of electronic devices or any of their components in your municipal
trash collection.
• Consult your local waste management authority or a recycling organization like
Earth911.com to nd an electronics recycling facility in your area.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
STRANGULATION HAZARD: Infants have STRANGLED in power cords. Keep power cords more than 3 feet away from
cribs, bassinets, play yards, and other safe sleep environments for infants.

— 5 —— 4 —
IMPORTANT SAFETY INSTRUCTIONS
9. Ventilation - Slots and openings in the case are provided for ventilation to ensure reliable operation of
the product and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the video equipment on a bed, sofa, rug, or other similar
surface. This product should never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the product manufacturer’s instructions have been followed.
10. Attachments - Do not use attachments unless recommended by the product manufacturer as they
may cause a hazard.
11. Water and Moisture - Do not use receivers or video monitors near water — for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet basement, near a swimming pool and the like.
12. Heat - The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including ampliers) that produce heat.
13. Accessories - Do not place this video equipment on an unstable cart, stand, tripod, or table. The
video equipment may fall, causing serious damage to the product. Use this product only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer’s instructions and use a mounting accessory
recommended by the manufacturer.
14. Camera Extension Cables - Check the rating of your extension cable(s) to verify compliance with your
local authority regulations prior to installation.
15. Mounting - The cameras provided with this system should be mounted only as instructed in this guide
or the instructions that came with your cameras, using the provided mounting brackets.
16. Camera Installation - Cameras are not intended for submersion in water. Not all cameras can be
installed outdoors. Check your camera’s environmental rating to conrm if it can be installed outdoors.
When installing cameras outdoors, installation in a sheltered area is recommended.
System Contents
After unpacking, you will have the following items:
Camera
Screw/Anchor Kit
Antenna
Quick Start Guide
Camera BracketAC Adapter
INTRODUCTION
Model AWSC25
Wireless
Outdoor
Security
Camera
Wireless Video Surveillance System
WirelessMade Simple.
QUICK START GUIDE
ACCESSORY
Compatible with ALC AWS2155
Video Surveillance System
Extension Cable

— 7 —— 6 —
INTRODUCTION
Getting to Know Your Camera
INSTALLATION
Installation Tips
Night Vision
• Before you install the camera, plan where and how it will be positioned, and where you will
route the cable that connects the camera to the power adapter.
• Optimized motion detection range is 6 - 18 feet for camera. The farther away an object is,
the less accurate the motion detection.
• Avoid having a direct light source in the view of the camera, including street lights, ceiling
or oor lamps, spotlights in the driveway, etc.
• Rainfall, pool water ripples/reections, tree/shrub leaves blowing in the wind – and the
shadows they create – can generate motion detection false alarms.
• Before starting permanent installation, have another person check the camera image on
the monitor with the camera positioned in the same place it will be permanently installed.
• It is recommended to ensure a clear line of sight between the camera and monitor and to
limit the amount of obstructions, such as walls and tree branches, between the camera
and monitor. Walls made of heavy building materials such as brick or concrete will
signicantly reduce signal range.
• If the signal will have to pass through a wall, placing the monitor or camera next to a
window will improve the signal strength.
• Do not install the camera pointing out of a window. The night time picture will be unusable
due to reection from the night vision LEDs.
• The cameras are pre-paired so they work out of the box. If you have purchased additional
cameras, you will need to pair them to the monitor, see “Camera Pairing” on page 24.
• As dust, grime, and cobwebs accumulate on the camera glass, they can reect light from
the infrared LED and might lower video quality. Periodically clean the lens glass with a
soft cloth.
• If the camera is too close to the monitor, you may get a whistling interference sound.
Simply move the camera away from the monitor to eliminate the interference sound.
The camera has built-in infrared LEDs to allow you to view at night for 24-hour surveillance. The
LEDs will automatically activate at night and the picture viewed will turn to black and white. The
night viewing range is up to 40 feet.
WARNING:
Weatherproof, IP66 rated cameras are suitable for outdoor installation. However, if possible, it is recommended
to install in a location that provides some shelter from the elements, such as beneath roof eaves.

— 9 —— 8 —
INSTALLATION
Installing the Camera(s)
u
If not mounting, but just using on a flat
surface (desk, table, etc.), skip to step 4.
v
Secure the multi-position Camera
Bracket to a stable surface, ceiling or
wall using the three supplied screws.
If needed, three anchors are also
included.
w
Loosen the T-Bolt on the Camera
Bracket and adjust viewing angle using
the Thumb Screw to rotate position.
xBOTTOM/SURFACE MOUNT:
uAlign Mounting socket on bottom of
the camera with T-Bolt and screw
camera onto the T-Bolt until it is in the
desired position.
vTighten the Brace against the camera
to secure it in place.
wSet the desired camera angle and
then tighten the Thumb Screw.
CEILING MOUNT:
uAlign Mounting socket on top of
the camera with T-Bolt and screw
camera onto it until it is in the
desired position.
v Tighten the Brace against the camera
to secure it in place.
wSet the desired camera angle and
then tighten the Thumb Screw.
T-Bolt Thumb
Screw
T-Bolt Thumb
Screw
u
v
w
u
v
w
INSTALLATION
Installing the Camera(s)
yScrew antenna clockwise into rear of the camera.
U
Connect one end of an AC adapter to
the camera’s power pigtail and plug the
other end of the adapter to a 120 volt AC
(standard indoor) power outlet.
This camera works with the AWS2155 base station, which should be turned on
to connect the camera.
V After up to 60 seconds, make sure the Power status LED turns red and the Link
Status LED turns green. If it doesn’t, try
reconnecting the AC adapter, and make
sure the power outlet is not controlled by
a wall switch.
You should now have video on your Live screen.
Repeat steps for additional camera(s).
Power
Status
LED
Link Status
LED
TIP: Pair camera as shown on the next page.
TIP: A 6 foot power extension cable is included for
your camera setup if needed.

— 11 —— 10 —
1
2014-05-05 PM09 : 34 : 18
INSTALLATION
u
Tap on the Open/Close icon to
open the menu options.
v
Tap the Options icon to enter the
System menu.
w
The following screen will appear.
See the following pages for the
System settings.
REC
1
0
2014-05-05 PM09 : 34 : 18
3.70GB
TIP: If recording, you cannot enter the
Options menu.
INSTALLATION
Camera PairingCamera Pairing
x
Follow steps 1 through 3 on the
previous page to access the
System Menu. Tap Camera
Setup icon to access the Camera
Setup screen.
y
Tap the desired camera to pair.
U
Tap the Pairing icon, “PAIRING”
will appear at the top left of the
screen.
“PAIRING FAIL” will appear if the
pairing failed. Move the camera
closer and try again.
V
Press and Hold the Pairing button
on that camera’s power cord until
PAIRED appears in the display.
The Green Link Status LED will
light in the camera. If a camera is
already assigned to the selected
channel, the monitor overwrites
that camera link with the new one.
CH1
MENU=SETUP DETAILS OPTIONS
CH1
PAIRING
When you add a new camera to your system, you have to “introduce” the camera and monitor
to each other so they can communicate.

— 13 —— 12 —
INSTALLATION
Turning a Camera On or O
u
Follow steps 1 through 3 on page
10 to access the System Menu.
Tap Camera Setup icon to
access the Camera Setup screen.

v
Tap the desired camera that you
want to turn on or off.
w
Repeatedly tap the On/Off icon to
cycle between On or Off.
CH1
MENU=SETUP DETAILS OPTIONS
CH1
MENU=SETUP DETAILS OPTIONS
MAINTENANCE
Monitor
Cameras
Upgrading the Firmware
As you use your touch-screen monitor, fingerprints, etc. will appear on the screen. Keep the
screen clean by wiping it with a microfiber cloth. It is not recommended to use any chemicals or
harsh detergents on the touch screen.
When dust and grime builds up on the camera lens and glass, it will affect the night vision
capability. The infrared light reflects off of the dust and grime, limiting the camera’s “vision.” Use
a microfiber cloth to regularly clean the cameras or when night vision video is cloudy or unclear.
The latest firmware and how to install the firmware will be available under the Observer category
on our support page at www.ALCWireless.com/support/.
Additional Features
For additional features and setup, refer to the AWS2155 owner’s manual.

— 15 —— 14 —
TROUBLESHOOTING
Problem
No Image.
Poor picture quality.
The motion sensor
does not respond to
movement.
Standard or Scheduled
recording is not working
properly.
Unable to pair the camera
to the monitor.
A white image appears at
night.
Possible Solution
Make sure the camera’s power is on.
Make sure the monitor has enough charge; connect it to
the included adapter.
Move the camera closer to the monitor; it might be out of
range or flip the antenna of the monitor and/or camera to
obtain best possible reception.
If the monitor is connected to a PC, no image will appear.
Move the camera closer to the monitor; it might be out of
range or flip the antenna of the monitor and/or camera to
obtain best possible reception.
Clean the camera lens using a microfiber cloth.
Ensure the camera is set to motion in the schedule
section.
Increase or decrease the sensitivity of the motion sensor.
Part of the screen is set to mask.
Ensure the correct Date and Time have been set.
Ensure the Record Schedule has been setup correctly,
Ensure the micro SD card is inserted into the monitor
and formatted.
There might be no movement detected, i.e. no moving
object to trigger the motion sensor.
Make sure the camera’s power is on.
Press and hold the pairing button quickly. Do not press
and release it; see page 24.
Turn off the monitor and restart. If power button does not
respond, use a pin to press the reset button located on
the side of the monitor.
The camera’s infrared LEDs shine invisible light that
reflects off surfaces such as glass will cause white light.
Place the camera on the other side of the window to
improve the night vision or place it in a well-lit area (it
is recommended to install a security lamp to improve
lighting).
If you have any trouble with your system, try these simple steps which should handle most
common issues.
TROUBLESHOOTING
Problem
System has locked up.
The camera’s signal
status icon shows no
bars.
Cannot remotely access
camera(s).
Possible Solution
Turn off the monitor and restart. If power button does not
respond, use a pin to press the reset button located on
the side of the monitor.
Make sure the camera is plugged in and the red LED is
on.
Make sure the camera is paired to the correct channel;
see page 10.
Re-pair the camera to the monitor.
Move the camera closer to the monitor; it might be out of
range or flip the antenna of the monitor and/or camera to
obtain best possible reception.
Make sure the software is installed and running on the PC.
Also that both PC and Android/Apple divice are on the
same network.

— 17 —— 16 —
PRODUCT SPECIFICATIONS
Camera
Communication Range .............................................................. 164 yd (150 m) in open space
Camera Resolution ...................................................................................................640 X 480
Operating Temperature ...............................................................14°F ~ 122°F (-10°C ~ 50°C)
Operating Voltage.................................................................................................... DC 5V, 1A
Current Consumption ........................................................................................ 550 mA (MAX)
Night Vision ......................................................................................................... 40 ft (12.2 m)
Dimensions.................................................... 4.8L x 2.6H x 2.6W in (123L x 65H x 65W mm)
Recording Time on SD Card.............................................................. 1GB = Approx. 10 hours
WARRANTY
One-Year Limited Warranty
Important: Evidence of original purchase is required for warranty service.
Atoms Labs LLC (“ALC”) ELEMENTS OF WARRANTY: ALC warrants, if properly installed and used
thereafter in strict accordance with the use and care guidelines provided in the instructions manual,
the Product shall be free from manufacturing defects in material and workmanship for one (1) year
from the documented date of purchase. The purchase date must be documented with either an
original sales receipt from the first retailer selling the Product or by credit card receipts or statements.
The warranty is non-transferrable.
LIMITED WARRANTY: The warranty terminates one year after the date of original retail sale. The
warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not
sold by ALC, (C) improperly installed, (D) serviced or repaired by someone other than an authorized
ALC service center for a defect or malfunction covered by this warranty, (E) used in any conjunction
with equipment or parts or as part of any system not manufactured by ALC, or (F) installed or
programmed by anyone other than as detailed by the owner’s manual for this product.
THIS WARRANTY DOES NOT COVER DATA LOSS, OR COSTS RELATED TO DATA RECOVERY.
ALC MAKES NO WARRANTY THAT ANY SOFTWARE PROVIDED WITH THE PRODUCT WILL
FUNCTION WITHOUT INTERRUPTION OR OTHERWISE BE FREE OF ANOMALIES, ERRORS
OR VIRUSES. THIS WARRANTY DOES NOT COVER ANY COSTS RELATING TO REMOVAL,
REPLACEMENT, OR INSTALLATION OF ANY PRODUCT, REGARDLESS OF WHETHER THE
PRODUCT IS FOUND BY ALC TO BE DEFECTIVE, OR SOFTWARE INSTALLED ON THE USER’S
COMPUTER.
ALC DOES NOT MAKE ANY CLAIMS OR WARRANTIES OF ANY KIND WHATSOEVER
REGARDING THE PRODUCT’S POTENTIAL, ABILITY OR EFFECTIVENESS TO PREVENT,
MINIMIZE, OR IN ANY WAY AFFECT PERSONAL OR PROPERTY DAMAGE OR INJURY. ALC
IS NOT RESPONSIBLE FOR ANY DAMAGE, LOSS OR THEFT RELATED TO THE PRODUCT OR
TO ITS USE FOR ANY HARM, WHETHER PHYSICAL OR MENTAL RELATED THERETO. ANY
AND ALL CLAIMS OR STATEMENTS, WHETHER WRITTEN OR VERBAL, BY SALESPEOPLE,
RETAILERS, DEALERS OR DISTRIBUTORS TO THE CONTRARY ARE NOT AUTHORIZED
BY ALC AND DO NOT AFFECT THIS PROVISION OF THIS WARRANTY. THE LIMITED
WARRANTY IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT
NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE
REIMBURSEMENT OR PAYMENT OF LOST REVENUE, PROFIT, OR DATA, OR FOR SPECIAL,
INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES HOWEVER CAUSED AND
REGARDLESS OF THE THEORY OF LIABILITY. Some states do not allow this exclusion or
limitation of incidental or consequential damages so the above limitation or exclusion may not
apply to you. Your damages will be limited to the total purchase price you paid for the Product.
Use of audio or video equipment for recording the image of a person without their knowledge
and consent is prohibited in certain states or jurisdictions. The end-user assumes all liability for
compliance with applicable state, local and federal laws. Atoms Labs has no responsibility or liability
for how the end-user uses a product. Wireless cameras require a wired connection to AC power
outlet. Network conditions and environmental factors can adversely affect wireless signal range.
Actual night vision range and image clarity depends on installation location, viewing area and light
reflection / absorption.
This Product may only be sold in the United States of America and Canada. There is no
warranty whatsoever on the Product outside of the United States of America and Canada.
STATEMENT OF REMEDY: If the Product is under warranty, ALC will either, at its option, repair or
replace the defective Product and return it to you without charge for parts, service, or any other cost.
ALC, at its option, may replace the Product with a new or refurbished Product.

ONE-YEAR LIMITED WARRANTY
IMPORTANT: Evidence of original purchase is required for warranty service.
WARRANTOR: Atoms Labs LLC (“ALC”) ELEMENTS OF WARRANTY: The ALC warranty covers the product for one (1) year
from the documented date of purchase. The purchase date must be documented with either an original sales receipt from the
rst retailer selling the product or by credit card receipts or statements.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date
of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modied, altered, or used as part of any conversion kits, sub-assemblies, or any congurations not sold by ALC, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized ALC service center for a defect or malfunction covered
by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by ALC, or (F)
installed or programmed by anyone other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: If the product is under warranty, ALC will either, at its option, repair or replace the defective unit &
return it to you without charge for parts, service, or any other cost. ALC, at its option, may replace the unit with a new or
refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT
& IS IN LIEU OF & EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE
FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow
this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specic legal rights, & you may also have other rights which vary from state to
state. This warranty is void outside the United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner’s manual you
are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). The Product should
include all parts & accessories originally packaged with the Product. Include evidence of original purchase & a note describing the
defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Atoms Labs, LLC
1040 Trade Avenue Customer Support: 844-767-8544
DFW Airport, TX 75261 9:00 am to 6:00 pm (CST)–Monday through Friday
ALC appreciates your support and feedback! If you come across software bugs or ways we could improve our products,
we would love to hear about them! Please email us at [email protected] and you will hear back from us within
(2) business days.
FCC Compliance Statement: This device complies
with Part 15 of the FCC rules. Operation is subjected
to the following two conditions: (1)this device may not
cause harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired operation.
Products with CE Marking comply with EMC Directive
(2004/108/EC); Low Voltage Directive (73/23/EEC);
R&TTE (1999/5/EC); ROHS Directive (2011/65/EU) issued by the
Commission of the European Community. Compliance with these
directives implies conformity to the following European Norms:
EMC: EN 301 489 LVD: EN 60950 Radio: EN 300 328
If the camera system no longer functions or can no longer be repaired, it must be disposed of according to the valid
statutory regulations. Disposal of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries and accumulators. Disposing of spent
batteries/accumulators with common household waste is prohibited! Batteries/accumulators that contain hazardous
substances are marked with the symbols on the side. These symbols indicate that it is prohibited to dispose of these
batteries/accumulators in the household waste. The abbreviations for the respective heavy metals are: Cd=cadmium,
Hg=mercury, Pb=lead. You can return spent batteries and accumulators that can no longer be charged to the
designated collection points in your community, outlets or wherever batteries or accumulators are sold. Following
these instructions will allow you to fulll the legal requirements and contribute to the protection of our environment!
Use of audio or video equipment for recording the image of a person without their knowledge and consent is prohibited in certain states or
jurisdictions. The end-user assumes all liability for compliance with applicable state, local and federal laws. Wireless cameras require a wired
connection to AC power outlet. Network conditions and environmental factors can adversely affect wireless signal range. Actual night vision range
and image clarity depends on installation location, viewing area and light reection / absorption. Lithium-ion battery must be recycled or disposed
of properly. Lithium-ion battery must be recycled or disposed of properly. Photography and illustration may differ slightly from actual product.
©2014 Atoms Labs LLC, All rights reserved. iPhone, iPad, iPod Touch, and App Store are registered trademarks of Apple, Inc. Chrome and
Android are registered trademarks of Google, Inc. Certain other product names, brand names, and company names may be trademarks or
designations of their respective owners.
WARRANTY
LEGAL REMEDIES: This limited warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. All parties irrevocably submit themselves to the exclusive venue
and personal jurisdiction of the state and federal courts in Denton County, Texas with regard to any
dispute relating to this Warranty or its enforcement. The parties also hereby waive any challenge to
venue and personal jurisdiction they may have to a lawsuit filed in a state or federal court in Denton
County, Texas, regarding a dispute between the parties relating to this Warranty or its enforcement.
You agree that Atoms Labs is entitled to its reasonable and necessary attorney’s fees if it is a
prevailing party in litigation against you relating to this Warranty. If any provision of this Warranty
is found to be invalid, illegal, or unenforceable, the validity, legality, and enforceability of any of the
remaining provisions will not in any way be affected or impaired and a valid, legal, and enforceable
provision of similar intent and economic impact will be substituted therefore.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions
in the owner’s manual you are certain that the Product is defective, pack the Product carefully
(preferably in its original packaging). The Product should include all parts & accessories originally
packaged with the Product. Include evidence of original purchase & a note describing the defect that
has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to
warrantor at:
Atoms labs LLC
2670 Firewheel Drive Suite D
Flower Mound, TX 75028
844-767-8544
9 a.m. to 6 p.m., Central Time, Monday through Friday
ALC reserves the right to make changes to its products without incurring any obligation to modify
any product that has already been manufactured. This warranty does not cover any alteration or
damage to any other software that may be or may become resident on the users system as a result
of installing any software provided.
ALC appreciates your support and feedback! If you come across software bugs or ways we could
improve our products, we would love to hear about them! Please email us at support@ALCWireless.
com and you will hear back from us.
Wireless
Made Simple.
102914_v1.2
ALCWireless.com

Wireless Made Simple.
ALCWireless.com