4
Description of Device
The room air-conditioners in the REMKO RKV 10 W,
13 W, 18 W and RKV 24 W series are split-design, wall-
mounted, direct-condensing units.
The way the air conditioning system works is quite sim-
ple; warm air is removed from the room to be cooled.
The environmentally-friendly refrigerant R 407C trans-
ports this warmth just as it does for all other REMKO
air-conditioning products.
The units primary function is to air-condition rooms.
They also filter and dehumidify the air, thus creating a
comfortable climate in the room. The units also have a
pure ventilation and dehumidification mode.
All units operate fully-automatically and offer a range of
other options thanks to their microprocessor control.
They are operated using the supplied infrared remote
control.
Safety Hints
Extensive tests have been conducted on the material,
functionality and quality of these units before they were
shipped. These units may only be used in accordance
with their intended purpose. Hazards may arise if the
units are used improperly.
Please make sure to follow these safety instructions.
àNever operate the indoor unit outside or without the
air filter.
àMake sure that personnel trained in the operation of
the air conditioner check the unit for visible defects
on the operating and safety mechanisms each time
before putting it into operation.
àBefore performing any work on the unit, the power
cord must be unplugged and the unit secured
against being switched on by unauthorised persons.
àOperate the units only when assembled and for their
intended purpose.
àKeep in mind that it is dangerous to remove covers
protective grilles, etc., during operation; this can lead
to uncontrolled operating situations.
àThe indoor unit and the outdoor part of the REMKO
air-conditioners have been technically adjusted to
one another.
If third-party components are used, the guarantee
becomes null and void.
àOperate the units exclusively within the permissible
operating ranges.
Pay attention to surrounding temperatures.
àMake sure that the unit is kept at a safe distance
from flammable materials.
àDo not install the inside unit close to heaters or be-
hind curtains and drapes.
Maintain the minimum safety distances indicated!
àEnsure that the air intake and outlet openings are al-
ways clear of foreign objects.
àDo not insert any objects into the air intake and out-
let openings.
àDo not place any objects on top of the units.
àNever operate the units in rooms susceptible to ex-
plosions.
àThe units are also not suitable for operation in rooms
containing large amounts of dust or aggressive air.
àDo not use flammable sprays such as hair spray or
spray paint in the direct vicinity of the units.
àDo not operate the units if the atmosphere is con-
taminated by oil, sulfur or salt.
àDo not expose the unit to direct streams of water.
High-pressure cleaners, etc.
àProtect the indoor unit and the remote control from
moisture and direct sunlight.
àNever open the units’ housing!
This may cause an electric shock.
àRegularly check that condensation is not blocked
from flowing out of the unit.
àMake sure that the outdoor part is equipped with a
safety mechanism which prevents the condenser
from being damaged caused by the unit switching
back on right away after it has been switched off.
The unit may only be switched back on after 3 min-
utes.
àCleaning and minor maintenance work made only be
performed by the operator or an authorised person
designated by him in accordance with the instruc-
tions contained in the section "Maintenance and
Service".
àAll REMKO air conditioners are supplied with the en-
vironmentally-friendly refrigerant R 407C.
àInstallation and repair work may only be performed
by authorised personnel.
Transport and Packaging
The unit is shipped in a stable transport box made of
cardboard. Please examine the unit when it is delivered.
Make note of any damage or missing parts on the ship-
ping bill and notify the shipping company and your con-
tract partner.
We do not assume any liability for subsequent com-
plaints.
