RemotePoint Jade VP4910 User manual

VP4910
RemotePoint®
Jade
User’s Manual

LASER Safety Statement
CAUTION: Use of controls or adjustments or performance of pro-
cedures other than those specied herein may result in hazardous
radiaon exposure.
The laser is acvated by pressing laser buon idened in the
user guide.
Do not stare into laser beam.
Do not shine a laser pointer at anyone.
Do not allow minors to use laser pointer unsupervised.
Do not point laser pointer at any reecve surface. A reect-
ed beam can be the same as a direct beam.
Do not disassemble the device.
Do not immerse in any liquid or expose to heat or moisture.
Use only within the designed operang temperature range of
0-40 deg C.
This product has no serviceable parts.
Laser Specications:
The laser used in the VP4910 complies as Class 2 laser product
with: IEC/EN 60825-1: 1994+A1+A2, and CFR Title 21 1040.10 and
1040.11, except for deviaons pursuant to Laser Noce No.50,
dated June 24, 2007.

Pairing the Receiver
First Use
1. Open the battery compartment by pressing down on the latch. Insert the batteries
per the diagram on the remote. Standard AA alkaline batteries are recommended.
2. With the computer turned on, plug the receiver into a
free USB port. (If the computer displays a“Found New
Hardware”dialog box, click Next until the driver is
installed.)
The receiver and remote come pre-paired at the factory. The remote will
automatically adjust frequencies and channels to ensure reliable
communication. Should you have any problem with
communication, you can re-pair them by plugging
the USB receiver into the AutoRF Port on
the back of the remote.

Jade Controls
Activate Laser
Previous Slide
Right Click
Mouse Control
Left Click
(Trigger)
Next Slide
Customizable
Buttons
Auto RF Port
RemotePoint Jade
Model VP4910
Laser Specicaon:
Max output power: <1mW.
Emied wavelength: 522-542nm
The Class 2 laser beam is emied from the front of the device,
indicated by the aperture warning label.

Customizing Buttons
The four buttons on the bottom of theVP4910 can be programmed to send a wide
variety of keystrokes. The software is available online at
http://www.smklink.com/support/downloads.html
The remote can also be programmed
to meet your own needs. To change
the functions of the remote, select
individual keys from the drop down
menu. Once you have made your
selection click“Program Receiver.”
Once programmed, the changes are
written to non-volatile memory on the
receiver.
The Customizing software requiresWindows to run or a Mac, running Boot Camp. Once
programmed those buttons will send those keys even on machines that aren’t running
the setup utility software, including Mac,Windows and Linux machines.

Warranty
SMK-Link Electronics Corporaon (SMK-Link) warrants to the original end-user
purchaser of the Product (“you”) that the Product, excluding baeries, will be
free from defects in materials and workmanship under normal use and service
for one-year from date of purchase. If the product becomes defecve in materi-
als or workmanship during the warranty period, SMK-Link will, at its opon,
either repair or replace it. The replacement unit may be a more current or
upgraded model if the originally purchased model is not available. Any Product
repaired or replaced under the terms of the warranty is covered for the remain-
der of the original warranty period or ninety (90) days from the date of return
shipment, whichever is longer. This warranty does not cover products which
have been subjected to misuse, accident, physical damage, improper installaon,
abnormal operaon or handling, neglect, inundaon or re or when product
regulator label has been removed, altered or rendered illegible; nor does it cover
accessory or consumable items.
SMK-Link shall not be liable for any indirect special, incidental, or consequenal
damages. SMK-Link’s total liability for damages for any cause related to, or arising
out of, the use or inability to use the product shall not exceed the original price
paid for the product even if SMK-Link has been informed of such possibility.
If your product requires service under warranty, you must rst contact SMK-Link
product support to receive an RMA number. Shipping of defecve units back to
SMK-Link is at your expense. The contact informaon can be found on the SMK-
Link website: www.smklink.com.
This warranty does not aect your statutory rights and you may have other
rights which vary from state to state and country to country. This warranty is
understood to be the complete and exclusive agreement between the pares,
superseding all prior agreements, oral or wrien, and all other communicaons
between the pares relang to the maer of this warranty.
The above warranty does not apply to products sold in Australia. Products sold
in Australia by an authorized reseller will contain an Australia specic warranty
statement.

This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interfer-
ence that may cause undesired operaon.
This equipment has been tested and found to comply with the limits for a CLASS B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protecon against harmful interference when the equipment is operated in
a residenal installaon. This equipment generates, uses, can radiate radio frequency
energy and if not installed and used in accordance with the instrucon guide, may cause
harmful interference to radio communicaons. However, there is no guarantee that this
radio interference will not occur in a parcular installaon. If this equipment does cause
harmful interference to radio or television recepon, which can be determined by turning
the equipment on and o, the user is encouraged to try to correct the interference by one
or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separaon between the equipment and the receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
Consult the dealer or an experienced Radio-TV technician for help.
Noce: Any changes or modicaons not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Extension cables are
not recommended, if used, they must be shielded in order to comply with the emission
limits.
IC Cercaon
The term “IC” before the cercaon/registraon number only signies that the Industry
Canada technical specicaons were met.
Declaraon of conformity
Manufacturer: SMK-Link Electronics Corporaon
3601-B Calle Tecate
Camarillo, CA 93012
Hereby, SMK-Link declares that the VP4910 is in compliance with the essenal require-
ments and other relevant provisions of Direcve 1999/5/EC.
EMC/EMI/Safety Standards:
EN 300 440-2 V1.1.1 (2001-09) EN 301 489-1 V1.4.1 (2002-08)
EN 301 489-3 V1.4.1 (2002-08) EN 60825-1 (1994, A11:1996, A2:2001)
FCC Certication

Thank you for purchasing a RemotePoint Jade. We know
you had other choices and we appreciate that you chose
SMK-Link for your wireless needs. So that we may beer
serve you in the future, please register online at
www.smklink.com/register.
Thank You
Support
SMK-Link Electronics Corporaon
3601-B Calle Tecate
Camarillo, CA 93012
TEL: [phone]
FAX: [phone]
Email: [email protected]om
www.smklink.com