Remta SD10 User manual

COMMERCIAL ELECTRICAL DONER (SHAWARMA) MACHINE
MODELS: SD10-SD14-SD17-SD18-MA03-SD15-SD12-SD16-SD19
USER MANUAL
Producer: REMTA MAKİNA İTH. İHR. SAN. TİC. LTD. ŞTİ.
Producing Address: Akçaburgaz Mah. 4. Cad. 153. Sok. No:23 34522 Esenyurt - İstanbul
[phone] • [email protected] • www.remta.com.tr

1. PRESENTATION
Dear user;
Our best thanks to you about you to choose our product and
trust in us. Our products are used in lots of domestic cities like
your choice. Our product is manufactured according to the
standard rules. We kindly remind that you to read the user manual
carefully for having the best performance against your expectations
from the product and using for long time and be sure the other
users read it, too. Please care about the rules written below before
calling the service.
2. WARNINGS
Please read this manual carefully and be sure the other users read it,
before the product is installed and operated for first. The product
will be out of warranty if you operate the device without reading
the user manual. The user manual should be written carefully to
install, use and the maintenance of the product that you have
bought. The electrical circuit that you will plug in your product,
should be suitable for the legislations. The faults are in your
responsibility which are occurred by your electrical circuit. Please
call the authorized service to have more information about the
subjects that you have doubts or misunderstand. We wish you to
have the best performance from the product. You will be charged
when you want service next to you about this product.
3. DESCRIPTION AND PURPOSE OF THE PRODUCT
The device is produced to cook the meat with cooker burners which is
used in the industrial kitchen services (collective food services,
restaurants, touristic places, buffets and etc.)

PREPARINGS BEFORE ASSEMBLING
Please read this manual carefully and be sure the other users read it,
before the product is installed and operated for first. The product will
be out of warranty if you operate the device without reading the user
manual.Please call the authorized service to have more information
about the subjects that you have doubts or misunderstand.
The electrical circuit that you will plug in your product, should be suitable
for the legislations installed by authorized person before you call the
service for activation the device. Please care about the security details.
It will be charged to you for the unnecessary time spends and the other
spend by the service person if you do not prepare the steps before
assembling.

TECHNICAL PROPERTIES
SD10
SD17
MA03
KOD
Code
SD14
SD18
SD15
SD12
SD16
SD19
420*550*700mm
540*640*1100mm
520*700*1250mm
20 kg
50 kg
50 kg
ÜRÜN ÖLÇÜSÜ
Product Dimensions
KAPASİTE
Capacity
540*640*940mm30 kg
540*640*1260mm60 kg
420*550*660mm
540*640*910mm
520*700*1200mm
20 kg
30 kg
50 kg
540*640*1370mm60 kg
AĞIRLIK
Weight
2800 W
5600 W
5600 W
GÜÇ
Power
4200 W
4200 W
17,5 kg
28 kg
38 kg
25,5 kg
25,5 kg
15,5 kg
23,5 kg
29 kg
2800 W
4200 W
5600 W
31 kg 7000 W

GENERAL DIMENSIONS AND THE LABELS
ELEKTRİKLİ DÖNER OCAĞI
REMTA MAKİNA • AKÇABURGAZ MH. 4.CD 153.SK. NO:23
ESENYURT / İSTANBUL / TURKEY • TEL: [phone]
MADE IN TURKEY
SERİ NO:
www.remta.com.tr
220 - 230 V 50-60 Hz
25,5 A
5600W
I / IP 20
28 KG
540x640x1100 mm
ÜRÜN KODU: SD17
MODEL: 4'lü ELEKTRİKLİ ÜSTTEN MOTORLU / SHAWARMA ELEC.
VOLTAJ / Voltage
AKIM / Nominal Current
GÜÇ / Power
ÜRÜN SINIFI / Product Class
AĞIRLIK / Weight
EBAT / Dimensions
...........................................:
................................:
..................................................:
.......................:
..........................................:
........................................:
HOT SURFACE
WARNING! GROUNDED
ELECTICITY CIRCUIT

SAFETY DETAILS
ASSEMBLING SAFETY
The device should be located and operated in a suitable for legislation and well
aired place. Please check the instructions before locating and operating the device.
It has to be operated in a well aired place. The all flammable solid and liquid materials
(cloth, alcohol kinds, petrochemical materials, wooden materials, plastic materials and
curtain) should be removed from the area that the device is operated.
USAGE SAFETY
All user should read the user manual. The oil which falls out while the device is
operated may occur greasy surface on the ground, so should be cleaned on time.
MAINTENANCE AND CLEANING SAFETY
Do not use pressured water when you clean the device. The device should be cleaned
when it is out of use. If any flammable cleaners are used on the surfaces of the device,
these surfaces should be cleaned and dried well before first use after this cleaning.
Just the authorized service person should fix the device.
Caution:
-Please read this manual carefully and be sure the other users read it, before the
product is installed and operated for first.
-The electrical circuit that you will plug in your product, should be suitable for the
legislation and dseigned by authorized person only.
-Please call the authorized service to have more information about the subjects
that you have doubts or misunderstand.
-The device should be plugged into the grounded socket out.
-Do not carry the device when the cooker surfaces are hot.
-The device should be located on a flat and non-vibration surface.
-Please be sure the device is plugged out when you clean it.
-The device works with 220-230 Volt ~ 50-60 Hz electricity.
-Do not put any insulator or conductive object in to the device.
-Keep away from the children.
-The electricity circuit should have a leakage current breaker as 30 mA.
-The cable of the device should be changed with a brandnew one by an authorized
service person only if it is damaged.
-Do not use the device out its main purpose.

CARRYING AND MOVING
MONTAGE
CARRYING
• It can be carried by human power.
• Do not bump or drop the device while you carry it.
MOVING
-Only the authorized tecnical service personal can change the operation place,
changing the cable of the device (adding, fixing,shorting etc.)
-The all switches on the device should be checked, all the cooking surfaces should
be warmed down before replacement of the device. After replacement the device
the all components of the device should checked again if the device is working or not.
-The device becomes out of warranty if any one makes any replacement instead of
the authorized technical service.
Customer Preparings
• The non flammable compartments should be at least 5 cm close to the device
otherwise distance should be 20 cm for the flammable parts.
• Care about the rules against the fire.
• Please make ready the electrical circuit before you call the authorized technical
service for installing the device.
Montage (Technical Service Responsibility)
-The under set desk should be parralel with the ground and have adjustable legs
when the device is use on it. The device should be located on a flat and
non-flammable surface.
-The safety situations should be checked for the validity before installing the device.
-Do not connect the device instead of the properties written onit.
-The device should be checked after it is installed if it is working or not.
-The device becomes out of warranty if any exparts are used which are not oiginal.

USING THE DEVICE
PURPOSE OF THE PRODUCT
The device is produced to cook the meat with cooker burners which is used in the
industrial kitchen services (collective food services, restaurants, touristic places,
buffets and etc.)
Note: Do not use the device out its main purpose. The users should read the user
manual and care about the safety before using the device.
USAGE:
Placing The Food,
The food which is prepared before should be fixed to the device.
Operating:
1-Put the small plate (nr:9) to the doner skewer (nr:6) from the upside., then fix the
down part to the skewer middle (nr:7) and fix the up part to the skewer holder (nr:5)
2-Make the motor switch (nr:18) as I position to unfix the doner skewer (nr:6)
3-The cooking block (nr:1) is backward and forward movable. You can adjust the
position of the cooking surface according to the food amount.You can fix the cooking
block via using the brake apparatus (nr:20) with turning right and left.
4-You use the device by manually if the motor becomes out of use.
5-You can adjust the cooking time of the food by positioning of the swicth as
maximum (2) or minimum (1).
TURN OFF THE SWITCHES AND CUT OFF THE ELECTRIC CIRCUIT BREAKERS AFTER
END OF THE USE
Turning Off:
-Turn off the switch from the on position.
-For your own safety please cut off the electrical connection.

CLEANING AND MAINTENANCE
CLEANING:
• Clean the out surface with a sponge via using dish detergent and dry it out after
every end of service beginning the first use.
• After every use the device should be cleaned very well. The burnt oil on the device
and the table can make bad smell and that can occur unhealthy situations.
• Do not use nitric acid or any kind of CHEMICAL MATERIALS to clean the device.
MAINTENANCE:
• The periodical maintenance should be done by the authorized technical personal.
• We recommend to maintenance for about per every 6 months according to the
using frequency.
• It will be charged to user for maintenance even the device is warranty.
• Turn off the device when it is out of use.
• Allways keep the device clean.
• Please obey the directives written in the user manual.
• At 24 °C, you can have the best performance from the device.
• The device can work between -5 and +40 °C.
• The life of the device is about 10 years..
EFFICIENCY USE

PARTS DESCRIPTION
SERVICE AND EXPART POINT
REMTA MAKİNA İTH. İHR. SAN. ve TİC. LTD. ŞTİ.
Adres: Akçaburgaz Mah. 4. Cad. 153. Sok. No:23 Esenyurt / İstanbul
Tel: [phone]
ser[email protected] • www.remta.com.tr
You can find all comunication information about our services in the link below.
www.remta.com.tr/yetkili-servisler
1 main body
2 switch and button
3 up side cover
4 doner skewer holder profile
5 doner skewer holder
6 doner skewer
7 doner skewer middle
9 small plate
11 oil holder drawer
12 cooking block
13 up side chasis
14 pedal
15 oil exhaust hole
17 table
18 motor on / off switch
19 motor on / off switch
20 break apparatus
21 motor electric cable
22 back side cover
23 moving box (right)
24 moving box (left)
26 main electric cable