4. SAFETY DETAILS
• The device works with 220-230 Volt ~ 50-60 Hz electricity.
• If the electrical cable is damaged please contact with the service.
• The device should be switched off before plugged into the electricity.
• The all flammable solid and liquid materials (cloth, alcohol kinds, petrochemical
materials, wooden materials, plastic materials and curtain) should be removed
from the area that the device is operated.
• Do not clean the product under flowed and pressured water.
• The device can be used together with our other products in the same product serie.
There has to be at least 30 cm between the each product.
• The device should be located and operated in a suitable for legislation
and well aired place. Please check the instructions before locating and
operating the device.
• The device is produced to use for industrial purposes and should be used by the
well educated person.
• Noone should try to fix the device except the producer and the authorized service.
• If any flame occurs next to the devicein the close location, please shut down
the gas valves and the circuit breaker with out any panic. Use fire extinguisher.
Never use water to extinguish the flame.
• The device should be plugged into the grounded socket out. Be sure that
you have grounded line in your electricity circuit.
• All user should read the user manual.
• Keep away from the children.
• Do not use the device out its main purpose.
• Do not close the air flow holes of the device.
• The device should be located on a non-flammable surface.
• Do not operate it next to the hot machines.
• It has to be operated in a well aired place.
• Do not operate it under the sunlight directly.
• Operate the device on a non-flammable surface.
• Please use heat resistant glove against its hot surfaces.
