RENPHO ES-SNG01-W User manual

Smart Nutrition Scale
ES-SNG01-W

Digital Scale Specialist
Thank you for choosing RENPHO! This food scale is a great companion for
healthy meal prep. It works with the Renpho Health App and helps accurately
calculate the amount of the calories in your food. You can easily keep an
up-to-date nutrition log of all your meals, track your daily nutrition, and improve
your diet for better health! We sincerely hope that you enjoy using your new
RENPHO Nutrition Scale!
RENPHO Smart Nutrition Scale User Manual

What's Included
Caution
Your RENPHO Nutrition Scale box includes:
1. RENPHO Nutrition Scale
2. Batteries: 3 * AAA(1.5V)
3. User Manual
When using this device, certain basic safety precautions must be followed, including the
following:
1. DO NOT exceed the 11 lbs (5 kg) weight capacity, as doing so may damage the scale. An ove-
rload indicator will appear on the display if the limit is exceeded.
2. Avoid exposing the scale to damp environments or extreme temperatures.
3. DO NOT immerse the scale in water or any liquid. If the liquid is spilled on the digital display or
buttons, immediately wipe the scale clean with a soft cloth to avoid internal damage.
4. This scale has been designed for household use only and is not intended for medical or comme-
rcial use.
5. Handle the scale with care. Keep the scale in a cool, dry environment.
01

Batteries
1. DO NOT mix new and used batteries.
2. To insert or replace the batteries, open the battery compartment located underneath the unit.
When inserting the batteries, always observe the correct polarity. Please put the 3xAAA batteries
into the battery compartment with the correct anode and cathode.
3. If the low battery indicator ("Lo") & appears on the display, replace the batteries.
4. If the scale is not in use for an extended period of time, remove the batteries to conserve battery
life and extend the life of the scale.
FCC Regulatory Compliance
02
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Devel-
opment Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et. 2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environne-
ment non contrôlé.
03

Specifications
Function
Model ES-SNG01-W
Unit oz / lb: oz / g / ml / fl’oz
Measuring
Increments 0.05oz / 1g / 1ml / 0.1fl’oz
Capacity 11lbs / 5000g / 5000ml / 176fl’oz
Dimensions 7.48 x 6.49 x 0.69inch (190 x 165 x 18mm)
Weight 1.08lbs
Battery 3 * AAA(1.5V)
1
25
1. Weighing Platform
2. Digital Display
3. Unit Button
4. Power / Tare Button
5. Battery Compartment
04
3
4

1. Press to turn on the scale. Press UNIT to select your desired measuring unit, which will
display at the top of the screen.
a. Weight: Choose between ounces ("oz"), both pounds and ounces ("lb: oz"), or grams ("g").
b. Volume: Choose between milliliters ("ml") or fluid ounce("fl’oz")
2. Optional: If you’re using a container to hold the items or liquid you’re measuring, first place the
empty container on the scale. Press to zero out the container’s weight.
3. Gently place your item on the scale. The screen will display the weight or volume.
4. Press and hold for 3 seconds to turn off the scale.
Set-Up the Scale
Measurement
1. Remove the insulation strip of the supplied batteries.
2. Press to turn on the scale.
-TARE
-TARE
-TARE
-TARE
05

Tare Function
Whenever you measure liquid or items inside a container, you can use the tare function to remove
the container’s weight from the final measurement.
1. Place an empty container on the scale.
The screen will display the container weight.
2. Press . The screen will now
display "0"again.
press -TARE
-TARE
06

3. Place liquid or items in the container. The
scale will now measure the liquid or items,
without the weight of the container.
4. When you’re done, reset the scale by
removing all weight and pressing .
Maintenance
• Use a slightly damp cloth to clean the surface of the scale, followed by a dry, soft cloth to wipe
away the remaining moisture.
• You can use a dry, soft cloth to wipe dust off the scale.
• DO NOT wash the scale or immerse it in water or any other liquid.
-TARE
07

08
App Instructions
Note: Due to continuing updates and improvements, the "Renpho Health" App may appear slightly different.
Note: For iPad download, please choose
filters-support-iPhone only.
Download the App
1) Search and download “Renpho Health” App
from Apple Store or Google Play.
Note: With a "Renpho Health" account, you can
also allow your family and friends to use your
nutrition scale.
2) Open the "Renpho Health" App. To create a new
account, tap “Sign up” following the in-app instructions. If
you already have an account, tap “Login In”.