
Handset Instructions
Handsets come in varying designs
depending ,on the type of mechanism
inside the chair. The following instructions
will aid easy use of your chair.
SingleMotor(Dewert/Okin)
Button 1 – Back up, leg rest in,
chair rises
Button2–Legrestout,backdown,
chair lowers
DualMotor(Dewert/Okin)
Button 1 – Back up
Button 2 – Chair rises, leg rest in
Button 3 – Back down
Button 4 – Chair lowers, leg rest out
If you have purchased one of our heat or massage systems you will
receiveaseparateinstructionleaet.
ThankyouforpurchasingaReposeC-AirorMultiC-Airchair.Please
taketimetoreadthisleaetwhichcontainsessentialinstructionson
yourchairsetup,handsetusageandupholsterycareaswellasvery
importantsafety,warrantyandcontactdetails.However,ifforany
reasonyouareunsureofanything,pleasecontactyoursupplier
immediatelyforfurtherinformation.
ImportantSafety Instructions
PLEASEENSURETHAT:
•YOUKEEPTHESEINSTRUCTIONSSAFEas you will need them for
reference purposes.
•ALLCARERSANDATTENDANTSare trained in the full use of the chair
and are qualified to provide advice on the pressure management and
postural care options.
•YOUUNDERSTAND the recommended user weight limit for your chair. It
will be dependent on the Repose chair model that you have chosen. Please
ensure that you understand these limits and DONOTexceedthem.This
may damage the chair and willinvalidateyourwarranty.
•YOUCHECKthe chair and cables regularly to ensure that they are in a
suitable working condition and that there is no damage. DONOTuse the
chair if it is not working properly or damaged.
•YOUALWAYS use the base of the chair to move it around. DONOT
use the backrest to move the chair as this may cause damage to the
framework and workings of the chair.
•NOONEis sitting in the chair when it is being moved.
•NOONEsitsonthehandsetordropsitontheoorasthismaycause
damage to it.
•NO cables are trapped under the chair and that YOUDONOT run over
the cables with the castors or other equipment e.g. vacuum cleaner.
•Children DONOT play with the handset and on, or with, the chair. To do
somaycausepersonalinjury.
•NOONE stands or sits on the arms or leg rest as this may cause the
chairtotipand/ordamagethechair.Todosomaycausepersonalinjury.
•NOONEstandsontheseatasthismaycausethechairtotipand/or
damagethechair.Todosomaycausepersonalinjury.
•YOUNEVERexitthechairwhilstthelegrestiselevated.
•YOUONLYUSE approved parts on your chair. These can be obtained
through your supplier. Failuretouseapprovedpartswillinvalidate
yourwarranty.
•YOUALWAYS get your supplier to carry out any repairs or fit new parts
to the chair. DONOT attempt to carry out your own repairs to the chair
as this willinvalidatethewarranty.
•YOUALWAYS disconnect your chair from the power source before
checking any part of the chair.
•YOUPROVIDE your original purchase invoice and unique chair batch
number when ordering parts or when making a claim under your
warranty.
COMFORT WITHOUT COMPROMISE
1
3
2
4
Chair Set Up
•To position the back onto the base of the chair stand behind the
chair and lay the back of the chair, face down and on top of the arms,
ensuring that you align the brackets on the back rest to the upright
supports on the base of the chair. Using slight pressure, slot the back
onto these supports and click into place. On some models you will find
asmallleverattachedtobothbrackets(lockingbar).Theseshouldbe
pushedforwardtolockthebackintoposition.Fitthebackapby
using the Velcro attachments to complete the back set up.
•If you need to remove the back, release the locking bars (where
applicable)andpullthebackupwardsandoff.
•If you have an electric powered chair for safety reasons check that
theextensioncable,whichislocatedattherearofthechair,hasnot
been damaged in transportation. On satisfaction connect the chair to
your transformer.
•ALWAYSensurethatthetransformerisplacedinaatpositionand
the correct way up.
•Once the transformer has been connected to the chair, plug the unit
into the power source and switch the power on ready for use.
NB:Thechairissafewhenthepowersourceislefton.
Cushion Set Up
•These chairs come with pressure management features such as
different seat cushion options and different backs. You should always
seekprofessionaladviceand/orsupportwhenusingachairfor
pressure management and postural control.
•The back cushions can come in different styles and are inter-
changeable depending on your chair model and your postural and
comfort requirements. Please consult your supplier for different options.
•There are a number of seat options depending on your postural and
comfort requirements. They offer differing pressure management
options. Please consult your supplier for the different options.
•To change the seat cushion slip your hand down the back of the seat
cushion and pull. This will release the seat cover from the Velcro.
Then peel back the seat cover to reveal the cushion. Simply pull the
cushion free from its Velcro and replace with new seat cushion option
ensuring that the Velcro is correctly aligned. Always ensure that the
fitted label is at the front of the seat, face up.
•If you choose the Air Cushion please ask your supplier for the
separatepumpleaetandpleasereadtheinstructionscarefully.
ChairLocation
•Position the chair in your chosen location, ensuring that the chair has
enoughspacetoreclinefullyandfreely.Thereshouldbenoobjects
behind the chair that will obstruct the chair movement and it should never
touch the wall when it reclines. Such obstructions will cause damage to
the chair and its mechanism and willinvalidatethewarranty.
•Thelegrestshouldmovefreelywithnoobjectstorestrictthismovement.
•Position the chair free from any trailing wires.
•Ensure that the chair is within easy reach of a power point to plug in the
transformer(unlessttedwithanAccupak)andtheairpump.
1
2
www.reposefurniture.co.uk
Delivering
Specialist Seating Solutions
Val Technology
•If your chair has Val technology fitted you will be able to alter the lift
angle to a 10°, 20° or 30° to suit your requirements when the chair
rises. Your chair will be positioned at 30° as standard. If you would
liketoadjusttheangleofthechairthenpleaseconsultyoursupplier
for further details.
Basic Technical Checks
ALWAYSdisconnectyourchairfromthepowersourcebefore
checkinganypartofthechair.Then
• Check the wall socket is in working order by trying another appliance.
• Check the connection from the chair to the transformer is connected.
• Checktoseeifanyofthecablesaredamagedortrapped.Damaged
cables should be reported to your supplier.
• Checktheelectricalfuseandbatteries(whereapplicable.)DONOT
open or attempt to open any electrical components other than to fit, as
instructed, batteries or electrical fuses. Todosomayinvalidate
yourwarranty.