ReptiZoo NRK Series User manual

EASY FOLDING REPTILE TERRARIUM
INSTRUCTION MANUAL
Thank you for choosing our products. In order to use this product correctly
and ensure its service life, please read the instructions carefully before use
NRK Series
NRK series easy folding reptile terrarium is a high-end patented terrarium with light weight, easy to assemble
and disassemble.It is suitable for snakes, tortoises, and other reptiles.
1. Provide 360° full view observation to enhance the interaction between reptiles and keepers.
2. Adopt new patented structural design, easy to assemble which is simple and practical.
3. Small package size, saving space, convenient for storage and management.
4. With world unique patented foldable save space design, it is a high-end and high-grade reptile terrarium. It
is easy to set up . One-hand opening door lock for easy maintenance and feeding. With water-tight base for
amphibian and aquatic. Misting system, fogging system can be used with the new knock-down terrarium.
Terrarium x1 Mesh Cover x1
Optional side metal
screen meshes
Cable pass system
Rubber caps 9.5x7.5mm
Left and right
glass door
Front aluminium bar x1
Side glass x2
A screws
M4x18mm
B screws
M4x38mm
3. Open the right panel in the
direction of the arrow
4. Open the back panel in t
he direction of the arrow
1. Take out the folded
terrarium 2. Open the left panel in the
direction of the arrow
5. Assemble the front aluminium
bar in the direction of the arrow
7. At the upper corner of the left and right sides,
Use short screws to lock front aluminium bar
and use long screws to lock side panel
and back panel
A
A
B
B
6. Terrarium frame assembled
Product Overview
Packing List
Product Features
Usage Method

1. Please read the instructions carefully and follow the safety instructions before using this product
2. Do not place the assembled terrarium in a wet or direct sunlight place, such as a bathroom or balcony
3. Move the terrarium with care and do not move it with wet hands. When moving the terrarium with
landscaping items inside, take notice that the internal items may fall obliquely and may cause damage to the
terrarium because of uneven stress
4. This product can not be assembled by children alone and young children shall use the terrarium under
supervision and guidance of their guardian.
Optional side metal screen meshes
8. Firstly unlock the sliders on front bar, and then assemble
the left and right doors in the direction of the arrow
9. Assemble Cable pass
Lift up the left and
right sliders on front
bar at the same time
11. Lock mesh cover to the terrarium
with latches as the picture shown
12.Install rubber caps on the terrarium10. Unlock mesh cover latches in 1-4
spot and place horizontally on the
top of the terrarium
1
4
2
3
Note: The left and right glass
panels can be taken out and
replaced by other materials of
the same size, such as mesh.
side glass and side mesh
(3 combinations are shown below )
or or
Special Notice:
The left and right glass panels
can be taken out and replaced
by other materials of the same
size, such as mesh.
During replacing, Assemble
glass or mesh into the grove of
upper edge and installed into
the lower edge, then lock the
upper wrench.
Rotate the side wrench upward
to form a 90 degrees angle
with the mesh cover
• Installation method of side glass
A
A
B1
B2
B
B2 B1
Cable pass consists of 3 parts A/B1/B2 Align the arrow
and install A in to B
Follow the direction
“CLOSE” and rotate it
to lock
Put B1 outside of terrarium
and B2 inside of terrarium
and then rotate B2 clockwise
to fasten the whole part B
0.4In
0.4In
Warning！
THE DISTANCE BETWEEN TOP MESH AND
DOME LAMP MUST BE MINIMUM 0.4 INCHES,
OR IT WILL CAUSE MESH BURING DUE TO
OVERHEATING.
Safety and maintenance
No.3 JinXingEr Road, Qingxi Town,
Dongguan City, Guangdong Province,
China. 523655