ReptiZoo RKP Series User manual
RKP Series
A0
Thanks for choosing our company’s product. In order to use the product properly and
ensure its service life, please read the instruction carefully before using it.
FLAT PACKED GLASS TERRARIUM WITH
REMOVABLE TRAY INSTRUCTION MANUAL
No.3 JinXingEr Road, Qingxi Town,
Dongguan City, Guangdong Province,
China. 523655
Tel: 86- 769- 87841199
Tmall: reptizoo.tmall.com
www.repti-zoo.com
Dongguan ETAN Pet Supplies Co.,Ltd.
5
Safety and Maintenance
Important safety information
1. Please read the manual carefully and follow the safety instructions before using the product.
2. Do not place the assembled terrarium in damp place or direct under sunlight, such as the bathroom or
balcony.
3. Terrarium should be handled with care and should not move it by wet hands. When moving the terrarium
which has been installed and landscaped, it is necessary to pay attention to the tilt of the internal items. And
terrarium may rupture under situation of uneven stress.
4.This product should not be installed by children alone. Guardians should supervise and guide children
when children using the terrarium alone.
5. Please do not repair the product by yourself. If there is any problem, please feedback to us for proper
treatment.
[Warning] Failure to follow these safety instructions may result in product damage and endanger personal
safety.
[Use] Please read all safety information before using the product.
[Maintenance] Do not disassemble without instruction. Please contact [email protected] if any troubles
during using.
4
2221
109 11
1
5 6 7 8
2 3 4
12
23 24
25
18 19
1413 15 16
17 20
1
13
2
1
24
20
11 12 14 Product Overview
Packing List
Product Features
The RKP glass terrarium realizes quick dismantling and assembly,convenient for transportation, simple and
practical. The pull-out tray can be quickly removed for cleaning and substrate replacement. It is stackable
with stacking posts so as to save space. It is suitable for reptiles such as geckos, snakes, tortoises,
hamsters, etc.
8. Install four sides glasses.
9. Fix top frame on metal tubes with screws.
screw
Rubber Caps
10. Install top mesh cover and rubber cap to cover screws.
11. Place trays into the bottom frame.
1. Easy to assemble and disassemble, convenient and practical
2. Top ventilation design with multiple cable pass
3. Pull-out removable trays for easy substrate replacement and cleaning
4. Bottom pad xtures for even load bearing and steady
1. Mesh cover: 1PC
2. Top frame: 1PC
3. Bottom frame: 1PC
4. Base: 1PC
5. Short metal tubes: 4PCS
6. Long metal tubes: 4PCS
7. front support bar: 2PCS
8. back support bar: 2PCS
9. Front support bar under the door: 2PCS
10. Back support bar under the door: 2PCS
11. Back glass: 1PC
12. Front glass: 2PCS
13. Front glass at the bottom: 1PC
14. Side glass: 2PCS
15. Back glass under the door: 1PC
16. Side glass under the door: 2PCS
17. Front glass under the door: 2PCS
18. Bottom edge support xture: 4PCS
19. Bottom middle support xture: 2PCS
20. Rubber cap: 4PCS
21. Angle screw: 4PCS
22. Screw: 8PCS
23. Screwdriver: 1PC
24. Tray: 2PCS
25. Gloves: 1 pair
3
2
14
3
2
1
3
2
4
18
5
321
6
7
7
7
8
8
8
9
9
9
15 16 17
10
10
10
19
5. Fix bottom frame onto metal tubes with angle screws
6. Install long metal tubes as following order.
1. bottom edge supports with screws and stick the middle supports by back sticker
2. Install metal tube on the base as following order.
3. Install support bar onto metal tubes.
4. Assemble glass on the base.
7. Install front and back support bars onto metal tubes.
Assemble Instruction
Table of contents
Other ReptiZoo Terrarium Accessories manuals
