ResinTEAK FURNITURE California RSTK-FLDG-MND User manual

QR
CODE
Scan QR Code for Installation Video
All Weather Indoor/Outdoor Chair
For your safety and the safety of others, please read all
the instructions and warnings in this manual carefully.
ResinTeak furniture is manufactured to be easy to maintain
only require periodic cleaning with mild soap and water.
To clean; mix a 3 (warm water) to 1 (mild soap) ratio in a bucket and with
a stiff bristle brush gently scrub in the direction of the grain; removing any
accumulated dirt, grease, surface stains and/or dust from the ResinTeak surface.
Warranty
Your ResinTeak furniture includes an industry surpassing Limited Lifetime Warranty.
Please review full warranty details and register your product via www.resinteak.com/warranty
We are certain that our eco-conscious plastic furniture will bring you many years of enjoyment.
At ResinTeak™, we are determined to help reduce the impact harmful plastic pollution is taking on our
planet, together with our production factories we are steadily increasing the use of recycled plastics in
our furniture collections.
We hope to further develop this technology advancement so our furniture production is comprised of
100% recycled plastics without the need for raw virgin materials or compromising the integrity of
form, function, and beauty that our furniture is known for.
Thank You for choosing ResinTeak™
TM
www.resinteak.com
Proudly designed in
California
V.MARC.03.22
Care Instructions
California Based, ServiceYou Can Count on.
Monday-Friday 9:00am to 5:00pm PST
949.316.0010 [email protected]

Warranty
Thank You for choosing ResinTeak
R
R
MODERN FOLDING
ADIRONDACK CHAIR
Model# RSTK-FLDG-MND

Assembly Instructions
!
This Package will contain small sharp parts/tools/hardware
– PLEASE KEEP AWAY FROM CHILDREN.
• Read through the assembly instructions fully before beginning.
• Check that all listed parts and hardware are included before beginning assembly.
• Avoid accidentally discarding small parts – DO NOT discard packaging until assembly is complete.
• Avoid personal injury and/or damage to product - Use CAUTION & CARE when lifting.
• Assembly time is approximately 20 minutes - Two adults are recommended to complete assembly.
• AVOID PERSONAL INJURY & DAMAGE TO PRODUCT – ENSURE TO LOCK ASSEMBLED CHAIR BEFORE USE
PLEASE SEE STEP 6 FOR FULL DETAILS
Package Contents
2
3
4
5
1
2-3
2-3
Assembly
Tools
Included
Par t
A
B
C
D
E
F
G
H
I
Part Name
Seat
Right Leg
Left Leg
Right Arm
Left Arm
Back Panel
Back Beam
Front Beam
Folding Bracket
Qty
1
1
1
1
1
1
1
1
2
Par t
1
2
3
4
5
Part Name
M 6 x 80 Screw
M 6 x 60 Bolt set
M 6 x 50 Bolt set
M 6 x 50 Screw
M 6 x 30 Screw
Qty
2
4
2
4
4
Step 1
Attach the Arm (Part E) to Front Legs (Part B and C)
Use Qty: 1 of M6x60 Bolt (Part 2), Washer (Part 2)
and Lock Nut (Part 2) per side to secure both Right
and Left side legs.
Step 2
Attach the Legs (Part C-B) to Seat (Part A)
Use Qty: 1 of M6x60 Bolt (Part 2), Washer (Part 2)
and Lock Nut (Part 2) per side to secure both Right
and Left side legs.
Step 3
Attach the Back (Part F) to seat and armrests.
Start with securing the Armrests (Parts D and E)
to Back (Part F) Use Qty: 1 of M6x80 Screw.
Step 4
Attach the folding Bracket (Part I) per side
Followed by attaching the Back
(Part F) to the Seat legs (Part A)Use Qty: 1 of
M6x50 Bolt & M6x50Screw (Part 3-4) per side.
Step 5
Attach the Rear Brace Beam (Parts G) to Seat
legs (Part A) Use Qty: 1 of M6X50 Screws
Attach the Front Beam (Part H) to front Legs
Using Qty: 2 of M6x30 Screw
Step 6
How to Fold the Chair
Please unplug the pin before
folding, then push the back foward.