Leigh Country TX 94104 User manual

ITEM # TX 94104
IMPORTANT: READ CAREFULLY BEFORE BEGINNING!
Make sure that all parts and hardware are present
before assembly.
Assemble on an a non-marring and level surface
Do not completely tighten all nuts and bolts until
the bench is fully assembled.
PARTS & HARDWARE LIST
BACK PANEL
SEAT PANEL
ARM FRAME
BOLT M6 x 2”
BOLT M6 x 2.7”
HEX NUT
PLASTIC NUT COVER
WRENCH
A
B
C
D
E
F
G
H
8
8
2
1
1
2
4
4
PART# DESCRIPTION QUANTITY
1. (SEE FIGURE 1) Take the Seat Panel (B) and align the holes to the holes of the Arm Frame (C) and secure by inserting Bolts (D) through the Arm Frame then
Seat Panel. Secure the Bolts (D) with the Hex Nuts (F) on the inside of the Seat Panel. Repeat for the other the Arm Frame (C).
Do not fully tighten the Nuts and Bolts.
2. Slide the Back Panel (A) between the Arm Frames (C) and align the holes. Secure by inserting Bolts (E) through the Arm Frame then Back Panel (A). Secure
the Bolts (E) with the Hex Nuts (F) on the inside of the Back Panel. Repeat for the other the Arm Frame (C).
3. Once all Hex Nuts and Bolts are secured, tighten all Bolts (D&E) with the Wrench (H).
4. Slide Plastic Nut Covers (G) over all exposed bolt ends.
Congratulations
on your assembly!
Figure 1
RIGHT
LEFT
A
E
E
D
D
DD
E
E
F
F
F
F
F
F
G
GG
G
G
G
B
C
C
METAL BENCH FLEUR DE LIS

© 2014 UGS Co., Inc. All Rights Reserved
DISTRIBUTED BY:
UNITED GENERAL SUPPLY CO., INC.
HOUSTON, TX 77036
www.LeighCountry.com
Limited One Year Finish Warranty (non-transferable)
This product is covered under United General Supply’s (UGS) one (1) year limited warranty. To the original purchaser of
this piece of furniture, cooler, or décor, UGS warrants that it will be free from defects in material and workmanship for up
to one year from the date of purchase under normal use and proper care.
Replacement of defective or missing parts will be sent at no charge to the customer for a period of 30 days from the date of
purchase. Freight, packaging, labor, or material charges of mising parts or hardware to and from our customer service
center is therefore the customer’s responsibility 30 days after date of purchase.
The limited warranty does not cover for commercial purposes, abusive use, and damage by modification, freeze damage,
rust, fading, and issues caused by improper care.
For minor defects or missing parts/hardware, please contact customer service immediately upon purchase. Please do not
return product to the store unless the damage is irrepairable. A customer service agent may help determine whether the
damage is repairable and will provide further instructions.
We guarantee your satisfaction on every product we sell, for any reasons that you are not satisfied with the product,
please refer to your local store return policy with proof of puchase for returns and refunds.
Proper Care Instructions
To clean the bench, use a mild soap and rinse with water. Dry off the bench completely with a soft cloth.
Durning a long periods of non-use, store furniture in the covered and dry place.
For the least maintenance, use under covered area.
Proof of purchase (dated register receipt) will be required for warranty claims. For faster service, please email proof of
purchase and photos to [email protected].
Customer Service may be reached Monday through Friday from 9:00a.m. to 5:00p.m. CST.
[email protected] OR 1-877-87LEIGHT (53444)